From 15b51f686ef338bad639ba6fb7d0332958285539 Mon Sep 17 00:00:00 2001 From: selias Date: Thu, 13 Apr 2017 12:28:43 +0200 Subject: HC Test: update plugin-ACL test suite - fix variables in routed icmpv6 test case - remove EXPECTED_FAILING tag from IPv6 and ICMPv6 cases - create and use keywords for test teardown Change-Id: I91792b5900015827bc2bcfd138192f972f92df28 Signed-off-by: selias --- .../mgmt-cfg-pluginacl-apihc-apivat-func.robot | 130 +++++++++------------ 1 file changed, 56 insertions(+), 74 deletions(-) (limited to 'tests/func') diff --git a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot index 15fedd9e07..cecd1c2846 100644 --- a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot @@ -43,9 +43,6 @@ | Library | resources.libraries.python.IPv6Util | Library | resources.libraries.python.Routing | Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| ... | AND | Read plugin-ACL configuration from VAT | ${node} -| ... | AND | Clear plugin-acl settings | ${node} | ${dut_to_tg_if1} | Suite Teardown | ... | Restart Honeycomb and VPP | ${node} | Documentation | *Honeycomb access control lists test suite for ACL plugin.* @@ -61,11 +58,7 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using different MACs. Receive all packets except those with\ | | ... | MACs in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | macip | ${acl_name_macip} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -98,12 +91,7 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -137,14 +125,7 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | [Tags] | EXPECTED_FAILING -# VPP-687: IPv6 next-header does not match for UDP values -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | l3_ip6 | ${acl_name_l3_ip6} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -178,12 +159,7 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -218,12 +194,7 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -255,12 +226,7 @@ | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with types and codes in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -293,14 +259,7 @@ | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. -| | [Tags] | EXPECTED_FAILING -# VPP-687: IPv6 next-header does not match for UDP values -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmpv6 | ${acl_name_icmpv6} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -335,12 +294,7 @@ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Read plugin-ACL configuration from VAT | ${node} | AND -| | ... | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | [Teardown] | Bridged ACL test teardown | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -383,6 +337,7 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | [Teardown] | Routed ACL test teardown - ipv4 | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -416,22 +371,19 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | [Tags] | EXPECTED_FAILING -# VPP-687: IPv6 next-header does not match for UDP values +| | [Teardown] | Routed ACL test teardown - ipv6 | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | L3_IP6 | ${acl_name_l3_ip6} | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up -# TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) -| | And Set Interface Address | ${dut_node} +| | And Honeycomb sets interface ipv6 address | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Set Interface Address | ${dut_node} +| | And Honeycomb sets interface ipv6 address | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} | | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -# TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) -| | And Add IP Neighbor +| | And Honeycomb adds interface ipv6 neighbor | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} | | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False @@ -468,6 +420,7 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. +| | [Teardown] | Routed ACL test teardown - ipv4 | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -502,6 +455,7 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. +| | [Teardown] | Routed ACL test teardown - ipv4 | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -534,6 +488,7 @@ | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. +| | [Teardown] | Routed ACL test teardown - ipv4 | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -567,31 +522,28 @@ | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. -| | [Tags] | EXPECTED_FAILING -# VPP-687: IPv6 next-header does not match for UDP values +| | [Teardown] | Routed ACL test teardown - ipv6 | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | L3_IP6 | ${acl_name_l3_ip6} +| | ... | icmpv6 | ${acl_name_icmpv6} | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up | | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up -# TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) -| | And Set Interface Address | ${dut_node} +| | And Honeycomb sets interface ipv6 address | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Set Interface Address | ${dut_node} +| | And Honeycomb sets interface ipv6 address | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -# TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) -| | And Add IP Neighbor +| | And Honeycomb adds interface ipv6 neighbor | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} | | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} +| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} | | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress | | Then Send ICMP packet with type and code | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} @@ -621,6 +573,7 @@ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. +| | [Teardown] | Routed ACL test teardown - ipv4 | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | And Add ARP on DUT @@ -660,6 +613,8 @@ *** Keywords *** | Setup interface IPs and routes for IPv4 plugin-acl test +| | [Documentation] | Import test variables, set interfaces up, +| | ... | configure IPv4 addresses, add neighbor entry and routes. | | [Arguments] | ${test_data_id} | ${acl_name} | | Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} @@ -671,8 +626,7 @@ | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | Honeycomb sets interface ipv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -# TODO: Configure routes through Honeycomb once routing tests are added -| | Add ARP on DUT +| | And Honeycomb adds interface ipv4 neighbor | | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} | | VPP Route Add | | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} @@ -682,6 +636,7 @@ | | ... | interface=${dut_to_tg_if2} | use_sw_index=False | Setup interfaces and bridge domain for plugin-acl test +| | [Documentation] | Import test variables, set interfaces up and bridge them. | | [Arguments] | ${test_data_id} | ${acl_name} | | Path For 2-node Testing Is Set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} @@ -694,3 +649,30 @@ | | Honeycomb Adds Interfaces To Bridge Domain | | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | | ... | ${bd_name} | ${bd_if_settings} + +| Bridged ACL test teardown +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up bridge domains. +| | Show Packet Trace on All DUTs | ${nodes} +| | Read plugin-ACL configuration from VAT | ${node} +| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} + +| Routed ACL test teardown - ipv4 +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up IPv4 addresses and neighbors. +| | Show Packet Trace on All DUTs | ${nodes} +| | Read plugin-ACL configuration from VAT | ${node} +| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Honeycomb removes interface ipv4 addresses | ${node} | ${dut_to_tg_if1} +| | Honeycomb clears all interface ipv4 neighbors | ${node} | ${dut_to_tg_if1} + +| Routed ACL test teardown - ipv6 +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up IPv6 addresses and neighbors. +| | Show Packet Trace on All DUTs | ${nodes} +| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Read plugin-ACL configuration from VAT | ${node} +| | Honeycomb removes interface ipv6 addresses | ${node} | ${dut_to_tg_if1} +| | Honeycomb clears all interface ipv6 neighbors | ${node} | ${dut_to_tg_if1} -- cgit 1.2.3-korg