From 2d928a03f626506f5beca37f41de5e00e62e9053 Mon Sep 17 00:00:00 2001 From: Matus Fabian Date: Mon, 16 May 2016 07:31:21 -0700 Subject: CSIT-28: IPsec tests initial commit Change-Id: I525d3c4f47c3f151b55af5bbdd9d2e8c1ce2863f Signed-off-by: Matus Fabian --- tests/func/ipsec/ipsec_ipv4.robot | 81 ++++++++++++++++++++++++++++++++++++++ tests/func/ipsec/ipsec_ipv6.robot | 82 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 163 insertions(+) create mode 100644 tests/func/ipsec/ipsec_ipv4.robot create mode 100644 tests/func/ipsec/ipsec_ipv6.robot (limited to 'tests/func') diff --git a/tests/func/ipsec/ipsec_ipv4.robot b/tests/func/ipsec/ipsec_ipv4.robot new file mode 100644 index 0000000000..c1f5fd754f --- /dev/null +++ b/tests/func/ipsec/ipsec_ipv4.robot @@ -0,0 +1,81 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| Test Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| ... | AND | Setup Topology for IPv4 IPsec testing +| Test Teardown | Run Keywords | VPP IPsec Show | ${dut_node} +| ... | AND | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| Documentation | *IPv4 IPsec test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip4}= | 192.168.100.2 +| ${dut_if_ip4}= | 192.168.100.3 +| ${tg_lo_ip4}= | 192.168.3.3 +| ${dut_lo_ip4}= | 192.168.4.4 +| ${ip4_plen}= | ${24} + +*** Test Cases *** +| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC encrytion and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with AES-CBC\ +| | ... | encrytion and SHA1-96 integrity in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Transport Mode with AES-CBC encrytion and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with AES-CBC\ +| | ... | encrytion and SHA1-96 integrity in transport mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} diff --git a/tests/func/ipsec/ipsec_ipv6.robot b/tests/func/ipsec/ipsec_ipv6.robot new file mode 100644 index 0000000000..c9b943bcdf --- /dev/null +++ b/tests/func/ipsec/ipsec_ipv6.robot @@ -0,0 +1,82 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| Test Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| ... | AND | Setup Topology for IPv6 IPsec testing +| Test Teardown | Run Keywords | VPP IPsec Show | ${dut_node} +| ... | AND | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| Documentation | *IPv6 IPsec test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv6 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip6}= | 3ffe:5f::1 +| ${dut_if_ip6}= | 3ffe:5f::2 +| ${tg_lo_ip6}= | 3ffe:60::3 +| ${dut_lo_ip6}= | 3ffe:60::4 +| ${ip6_plen}= | ${64} + + +*** Test Cases *** +| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC encrytion and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with AES-CBC\ +| | ... | encrytion and SHA1-96 integrity in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Transport Mode with AES-CBC encrytion and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with AES-CBC\ +| | ... | encrytion and SHA1-96 integrity in transport mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -- cgit 1.2.3-korg