From d30aa3a0c0e64682266b0fbf5c8506952e39e414 Mon Sep 17 00:00:00 2001 From: selias Date: Fri, 17 Mar 2017 14:44:27 +0100 Subject: CSIT-526 HC test: DHCP relay Change-Id: I00d841bee1e5139a4530ce97d8bda17780caa0f1 Signed-off-by: selias --- .../mgmt-cfg-dhcp-apihc-apivat-func.robot | 119 +++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot (limited to 'tests/func') diff --git a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot new file mode 100644 index 0000000000..4405da11e6 --- /dev/null +++ b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/dhcp_proxy.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/dhcp.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv4Setup +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.Routing +| Variables | resources/test_data/honeycomb/dhcp_relay.py +| Documentation | *Honeycomb DHCP relay test suite.* +| Test Setup | Clear Packet Trace on All DUTs | ${nodes} +| Suite Teardown | Restart Honeycomb and VPP | ${node} +| Force Tags | honeycomb_sanity | honeycomb_odl + +*** Test Cases *** +| TC01: Honeycomb can configure DHCP relay entry +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-DHCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\ +| | ... | neighbors and configure DHCP relay. +| | ... | [Ver] Send DHCP packets from TG interface to DUT. Receive all packets\ +| | ... | on the second TG interface and verify required fields. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv4 +| | Given DHCP relay configuration from Honeycomb should be empty | ${node} +| | When Honeycomb configures DHCP relay | ${node} | ${relay1} | ipv4 | ${0} +| | Then DHCP relay configuration from Honeycomb should contain +| | ... | ${node} | ${relay1_oper} +| | When DHCP relay test setup +| | Then Send DHCP Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} +| | ... | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} | ${client_ip} +| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} + +| TC02: Honeycomb can remove DHCP relay entry +| | [Documentation] | Remove DHCP relay configuration, and verify that\ +| | ... | it was removed. +| | Given DHCP relay configuration from Honeycomb should contain +| | ... | ${node} | ${relay1_oper} +| | When Honeycomb clears DHCP relay configuration | ${node} +| | Then DHCP relay configuration from Honeycomb should be empty | ${node} + +| TC03: Honeycomb can configure multiple DHCP relay servers. +| | [Documentation] | Configure multiple DHCP relay servers and verify\ +| | ... | their configuration using operational data. +| | [Teardown] | Honeycomb clears DHCP relay configuration | ${node} +| | Given DHCP relay configuration from Honeycomb should be empty | ${node} +| | And Honeycomb configures DHCP relay | ${node} | ${relay2} | ipv4 | ${0} +| | Then DHCP relay configuration from Honeycomb should contain +| | ... | ${node} | ${relay2_oper} + +| TC04: Honeycomb can configure DHCP relay entry with ipv6 +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv6-DHCPv6. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\ +| | ... | neighbors and configure DHCP relay. +| | ... | [Ver] Send DHCPv6 packets from TG interface to DUT. Receive all\ +| | ... | packets on the second TG interface and verify required fields. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv6 +| | ... | AND | Honeycomb clears DHCP relay configuration | ${node} +| | Given DHCP relay configuration from Honeycomb should be empty | ${node} +| | When Honeycomb configures DHCP relay | ${node} | ${relay_v6} | ipv6 | ${0} +| | Then DHCP relay configuration from Honeycomb should contain +| | ... | ${node} | ${relay_v6_oper} +| | When DHCP relay test setup IPv6 +| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} +| | ... | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip6} +| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if2_mac} + +*** Keywords *** +| DHCP relay test setup +| | Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | Add ARP on DUT +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} +| | Add ARP on DUT +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip} | ${tg_to_dut_if2_mac} +| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | ${NONE} | local +| | ... | ${FALSE} | ${NONE} + +| DHCP relay test setup IPv6 +| | Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | Honeycomb sets interface ipv6 address | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_length_v6} +| | Honeycomb sets interface ipv6 address | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_length_v6} +| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip6} +| | ... | ${tg_to_dut_if2_mac} +| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | ${NONE} | local +| | ... | ${FALSE} | ${NONE} -- cgit 1.2.3-korg