From fe29ca4b7e6c412c69f1c56404513a33236aa617 Mon Sep 17 00:00:00 2001
From: Tibor Frank <tifrank@cisco.com>
Date: Wed, 22 Feb 2017 09:06:27 +0100
Subject: CSIT-530: Add common setup and teardown to perf tests

Change-Id: I2e76de710b4b758eac1d24d447a9c5938f937385
Signed-off-by: Tibor Frank <tifrank@cisco.com>
---
 ...520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot | 148 ++++++++++-----------
 1 file changed, 72 insertions(+), 76 deletions(-)

(limited to 'tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot')

diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot
index 45d7263aab..2ef238c818 100644
--- a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -14,16 +14,21 @@
 *** Settings ***
 | Resource | resources/libraries/robot/performance.robot
 | Library | resources.libraries.python.Policer
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ...        | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ...
 | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
 | Documentation | *Reference NDR throughput IPv4 policer verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -57,18 +62,17 @@
 | | ... | Byte frames using single trial throughput test at 2x 3.1mpps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.1mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -77,18 +81,17 @@
 | | ... | Byte frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -97,17 +100,16 @@
 | | ... | Byte frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc04-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -116,18 +118,17 @@
 | | ... | 64 Byte frames using single trial throughput test at 2x 5.6mpps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.6mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc05-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -136,18 +137,17 @@
 | | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc06-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -156,17 +156,16 @@
 | | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc07-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -175,18 +174,17 @@
 | | ... | Byte frames using single trial throughput test at 2x 8.9mpps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.9mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc08-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -195,18 +193,17 @@
 | | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc09-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
 | | [Documentation]
@@ -215,14 +212,13 @@
 | | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
-| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-- 
cgit 1.2.3-korg