From e3ed9257cd7ef50b44eca72ef7d9ae6c7c792647 Mon Sep 17 00:00:00 2001 From: pmikus Date: Wed, 16 Nov 2016 16:45:05 +0100 Subject: CSIT-469 Rename performance suites Rename performance suites and add more TAGS Change-Id: I6a5251bb6e380fe2a47a6ec1c1aeb4a9f70c5ce3 Signed-off-by: pmikus --- tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot | 249 ------------------------- 1 file changed, 249 deletions(-) delete mode 100644 tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot (limited to 'tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot') diff --git a/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot deleted file mode 100644 index 7494e4fc2e..0000000000 --- a/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot +++ /dev/null @@ -1,249 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance.robot -| Library | resources.libraries.python.Cop -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT -| ... | NIC_Intel-X520-DA2 -| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *Reference NDR throughput IPv6 whitelist verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv6 header and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Test Cases *** -| TC01: Verify 78B ref-NDR at 2x 2.8Mpps - DUT IPv6 whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 78 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 2.8mpps -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC03: Verify 9000B ref-NDR at 2x 138.580kpps - DUT IPv6 whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC04: Verify 78B ref-NDR at 2x 4.9Mpps - DUT IPv6 whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 78 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 4.9mpps -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC07: Verify 78B ref-NDR at 2x 10.1Mpps - DUT IPv6 whitelist - 4thread 4core 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 78 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 10.1mpps -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 whitelist - 4thread 4core 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 - -| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 whitelist - 4thread 4core 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 -- cgit 1.2.3-korg