From 0284cfd6ae5dbd98e94d457b444746ed828b3901 Mon Sep 17 00:00:00 2001
From: Peter Mikus <pmikus@cisco.com>
Date: Wed, 19 Apr 2017 08:05:50 +0200
Subject: Fix: IPSec+Lisp suite naming

Change-Id: I9d5fbffbdfa257354104cd01818223ab2db229f8
Signed-off-by: Peter Mikus <pmikus@cisco.com>
---
 ...4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc.robot | 363 ---------------------
 ...sectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot | 363 +++++++++++++++++++++
 2 files changed, 363 insertions(+), 363 deletions(-)
 delete mode 100644 tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc.robot
 create mode 100644 tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot

(limited to 'tests/perf')

diff --git a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc.robot b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc.robot
deleted file mode 100644
index 55b7599738..0000000000
--- a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc.robot
+++ /dev/null
@@ -1,363 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance.robot
-| Resource | resources/libraries/robot/ipsec.robot
-| Resource | resources/libraries/robot/lisp/lispgpe.robot
-| ...
-| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | IP4FWD
-| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY
-| ... | NIC_Intel-XL710
-| ...
-| Suite Setup | Run Keywords
-| ... | 3-node Performance Suite Setup with DUT's NIC model | L3 | Intel-XL710
-| ... | AND | Verify Crypto Device On All DUTs | force_init=${True}
-| ... | AND | Verify Kernel Module On All DUTs | igb_uio | force_load=${True}
-| Suite Teardown | 3-node Performance Suite Teardown
-| ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
-| ... | 3-node-IPv4
-| ...
-| Documentation | *IPv4 IPsec transport mode performance test suite.*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\
-| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\
-| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\
-| ... | from TG, encrypt it and send to another DUT, where packets are\
-| ... | decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number\
-| ... | of packets transmitted. NDR is discovered for different\
-| ... | number of IPsec tunnels using binary search algorithms with configured\
-| ... | starting rate and final step that determines throughput measurement\
-| ... | resolution. Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, number of flows per flow-group equals to\
-| ... | number of IPSec tunnels) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\
-| ... | field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\
-| ... | RFC2544.
-
-*** Variables ***
-# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
-# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
-| ${dut2_spi}= | ${1000}
-| ${dut1_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${ipsec_overhead}= | ${54}
-
-*** Test Cases ***
-| tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-
-| tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-| tc03-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
-| | ...
-| | ${framesize}= | Set Variable | ${1518}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-
-| tc04-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | ...
-| | ${framesize}= | Set Variable | ${1518}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-| tc05-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 1T1C | STHREAD | NDRDISC
-| | ...
-| | ${framesize}= | Set Variable | IMIX_v4_1
-| | ${imix_size}= | Get Frame Size | ${framesize}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-
-| tc06-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
-| | ... | core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | ...
-| | ${framesize}= | Set Variable | IMIX_v4_1
-| | ${imix_size}= | Get Frame Size | ${framesize}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-| tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
-| | ... | cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 2T2C | MTHREAD | NDRDISC
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${2}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-
-| tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
-| | ... | cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${2}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-| tc13-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
-| | ... | cores, 2 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 4T4C | MTHREAD | NDRDISC
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${4}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-
-| tc14-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
-| | ... | cores, 2 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
-| | ...
-| | ${framesize}= | Set Variable | ${64}
-| | ${min_rate}= | Set Variable | ${10000}
-| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${4}
-| | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
-| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
diff --git a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
new file mode 100644
index 0000000000..55b7599738
--- /dev/null
+++ b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
@@ -0,0 +1,363 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/ipsec.robot
+| Resource | resources/libraries/robot/lisp/lispgpe.robot
+| ...
+| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | IP4FWD
+| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY
+| ... | NIC_Intel-XL710
+| ...
+| Suite Setup | Run Keywords
+| ... | 3-node Performance Suite Setup with DUT's NIC model | L3 | Intel-XL710
+| ... | AND | Verify Crypto Device On All DUTs | force_init=${True}
+| ... | AND | Verify Kernel Module On All DUTs | igb_uio | force_load=${True}
+| Suite Teardown | 3-node Performance Suite Teardown
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
+| Documentation | *IPv4 IPsec transport mode performance test suite.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\
+| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\
+| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\
+| ... | from TG, encrypt it and send to another DUT, where packets are\
+| ... | decrypted and sent back to TG.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number\
+| ... | of packets transmitted. NDR is discovered for different\
+| ... | number of IPsec tunnels using binary search algorithms with configured\
+| ... | starting rate and final step that determines throughput measurement\
+| ... | resolution. Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, number of flows per flow-group equals to\
+| ... | number of IPSec tunnels) with all packets\
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\
+| ... | field is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\
+| ... | RFC2544.
+
+*** Variables ***
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+| ${s_24.5G} | ${24500000000}
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+| ${s_18.75Mpps} | ${18750000}
+| ${dut2_spi}= | ${1000}
+| ${dut1_spi}= | ${1001}
+| ${ESP_PROTO}= | ${50}
+| ${ipsec_overhead}= | ${54}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+
+| tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+| tc03-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+
+| tc04-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+| tc05-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 1T1C | STHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | IMIX_v4_1
+| | ${imix_size}= | Get Frame Size | ${framesize}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+
+| tc06-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\
+| | ... | core, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | IMIX_v4_1
+| | ${imix_size}= | Get Frame Size | ${framesize}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Cryptodev to all DUTs | ${1}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+| tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
+| | ... | cores, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 2T2C | MTHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${2}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+
+| tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\
+| | ... | cores, 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${2}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+| tc13-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
+| | ... | cores, 2 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 4T4C | MTHREAD | NDRDISC
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${4}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+
+| tc14-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\
+| | ... | cores, 2 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | ...
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Set Variable | ${s_18.75Mpps}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
+| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Cryptodev to all DUTs | ${4}
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-- 
cgit 1.2.3-korg