From 058dfaa4ad10b8fd3df7da7793f4633ac2afe64c Mon Sep 17 00:00:00 2001
From: Peter Mikus <pmikus@cisco.com>
Date: Wed, 11 May 2016 15:07:06 +0200
Subject: Add test cases with "dpdk no-multi-seg" in vpp startup config

- JIRA: CSIT-73
- Add ability to configure no-multi-seg parameter in VPP startup
  configuration
- Add keywords to selectively configure parameters in startup
  configuration
- Modify testcases

Change-Id: I3c5c0a1cc2b1156d5a87ff36628b50793dd9ac5f
Signed-off-by: Peter Mikus <pmikus@cisco.com>
---
 .../Short_Xconnect_Intel-X520-DA2.robot            | 99 ++++++++++++++--------
 1 file changed, 62 insertions(+), 37 deletions(-)

(limited to 'tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot')

diff --git a/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot b/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot
index 11ac9eddc8..c6cc2eede4 100644
--- a/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot
@@ -20,7 +20,8 @@
 | ... | L2 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Show statistics on all DUTs
+| Test Teardown | Run Keywords | Show statistics on all DUTs
+| ...                          | Remove startup configuration of VPP from all DUTs
 | Documentation | Minimal throughput acceptance test cases
 
 *** Test Cases ***
@@ -32,10 +33,13 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.6mpps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 1core VPP passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology
 | | [Documentation]
@@ -45,10 +49,13 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 1core VPP passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology
 | | [Documentation]
@@ -58,10 +65,12 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 2core VPP with rss 1 passes 64B frames through L2 cross connect at 2x 8.3Mpps in 3-node topology
 | | [Documentation]
@@ -71,10 +80,13 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.3mpps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 2core VPP with rss 1 passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology
 | | [Documentation]
@@ -84,10 +96,13 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 2core VPP with rss 1 passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology
 | | [Documentation]
@@ -97,10 +112,12 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 4core VPP with rss 2 passes 64B frames through L2 cross connect at 2x 9.3Mpps in 3-node topology
 | | [Documentation]
@@ -110,10 +127,13 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.3mpps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 4core VPP with rss 2 passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology
 | | [Documentation]
@@ -123,10 +143,13 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
 
 | 4core VPP with rss 2 passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology
 | | [Documentation]
@@ -136,7 +159,9 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And   Add all PCI devices to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   L2 xconnect initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-xconnect
-- 
cgit 1.2.3-korg