From a4cad14b7e0b7e94f9e80b1a45cd86b3bc09d0a0 Mon Sep 17 00:00:00 2001
From: Jan Gelety <jgelety@cisco.com>
Date: Wed, 30 Oct 2019 04:52:03 +0100
Subject: FIX: do not use ping in vpp-device tests

Change-Id: Ic11f863e7ffad70d45e6e8dc39c70efc62cecc96
Signed-off-by: Jan Gelety <jgelety@cisco.com>
---
 ...h2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot |  84 ---------------
 ...icmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot |  81 ---------------
 ...2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot |  80 ---------------
 ...h2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot | 113 ---------------------
 ...eth2p-ethipv4-ip4base-eth-2memif-1dcr-dev.robot |  83 +++++++++++++++
 ...thipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot |  81 +++++++++++++++
 ...th2p-ethipv4-l2xcbase-eth-2memif-1dcr-dev.robot |  80 +++++++++++++++
 ...eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot | 113 +++++++++++++++++++++
 8 files changed, 357 insertions(+), 358 deletions(-)
 delete mode 100644 tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
 delete mode 100644 tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
 delete mode 100644 tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
 delete mode 100644 tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
 create mode 100644 tests/vpp/device/container_memif/eth2p-ethipv4-ip4base-eth-2memif-1dcr-dev.robot
 create mode 100644 tests/vpp/device/container_memif/eth2p-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
 create mode 100644 tests/vpp/device/container_memif/eth2p-ethipv4-l2xcbase-eth-2memif-1dcr-dev.robot
 create mode 100644 tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot

(limited to 'tests/vpp/device/container_memif')

diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
deleted file mode 100644
index 2c43924150..0000000000
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,84 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *IPv4 routing test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries. Container is connected to VPP via \
-| ... | Memif interface. Container is running same VPP version as running on \
-| ... | DUT.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1 and via container; on receive TG \
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and \
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be routed by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize IPv4 routing with memif pairs
-| | Then Send packet and verify headers
-| | ... | ${tg} | 10.10.10.1 | 20.20.20.1
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
-
-*** Test Cases ***
-| tc01-64B-ethicmpv4-ip4base-eth-2memif-1dcr-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
deleted file mode 100644
index 643879a086..0000000000
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *L2 bridge-domain test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4. Both apply to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
-| ... | switching. Container is connected to VPP via Memif interface. \
-| ... | Container is running same VPP version as running on DUT.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 and via container; \
-| ... | on receive TG verifies packets for correctness and their IPv4 \
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
-
-*** Test Cases ***
-| tc01-64B-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
deleted file mode 100644
index 83e9f8a81e..0000000000
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,80 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *L2 cross-connect test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | (L2XC) switching. Container is connected to VPP via Memif interface. \
-| ... | Container is running same VPP version as running on DUT.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 and via container; \
-| ... | on receive TG verifies packets for correctness and their IPv4 \
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize L2 xconnect with memif pairs
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
-
-*** Test Cases ***
-| tc01-64B-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
deleted file mode 100644
index 3d6836f3b2..0000000000
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,113 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *IPv4 routing test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | two static IPv6 /64 route entries. Container is connected to VPP via \
-| ... | Memif interface. Container is running same VPP version as running on \
-| ... | DUT.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1 and via container; on receive TG \
-| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr and \
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be routed by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Set interfaces in path up
-| | And Set up memif interfaces on DUT node
-| | ... | ${dut1} | memif-DUT1_CNF | memif-DUT1_CNF
-| | ... | memif_if1=memif_if1 | memif_if2=memif_if2
-| | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
-| | And Add Fib Table | ${dut1} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${dut1_if2} | 20 | ipv6=${True}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
-| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
-| | ... | ${memif_if2}
-| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:3::0 | 64 | gateway=2001:2::2 | interface=${memif_if1}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:1::0 | 64 | gateway=2001:2::2 | interface=${memif_if2}
-| | ... | vrf=20
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::2 | ${tg_if2_mac}
-| | Then Send packet and verify headers
-| | ... | ${tg} | 2001:1::1 | 2001:3::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
-
-*** Test Cases ***
-| tc01-78B-ethicmpv6-ip6base-eth-2memif-1dcr-dev
-| | [Tags] | 78B
-| | frame_size=${78} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethipv4-ip4base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv4-ip4base-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..152f3f6735
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethipv4-ip4base-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,83 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | container
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running on \
+| ... | DUT.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
+| ... | sent in one direction by TG on links to DUT1 and via container; on \
+| ... | receive TG verifies packets for correctness and their IPv4 src-addr, \
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv4 packet in both directions between two\
+| | ... | of its interfaces to be routed by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
+| | And Initialize IPv4 routing with memif pairs
+| | Then Send packet and verify headers
+| | ... | ${tg} | 10.10.10.1 | 20.20.20.1
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+
+*** Test Cases ***
+| tc01-64B-ethipv4-ip4base-eth-2memif-1dcr-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..77e0b44956
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,81 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | container
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *L2 bridge-domain test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
+| ... | Both apply to all links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
+| ... | switching. Container is connected to VPP via Memif interface. \
+| ... | Container is running same VPP version as running on DUT.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61\
+| ... | are sent in both directions by TG on links to DUT1 and via container; \
+| ... | on receive TG verifies packets for correctness and their IPv4 \
+| ... | src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
+| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
+| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
+| | Then Send IPv4 bidirectionally and verify received packets
+| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+
+*** Test Cases ***
+| tc01-64B-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethipv4-l2xcbase-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv4-l2xcbase-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..de62812de6
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethipv4-l2xcbase-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,80 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | container
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *L2 cross-connect test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
+| ... | (L2XC) switching. Container is connected to VPP via Memif interface. \
+| ... | Container is running same VPP version as running on DUT.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 \
+| ... | are sent in both directions by TG on links to DUT1 and via container; \
+| ... | on receive TG verifies packets for correctness and their IPv4 \
+| ... | src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv4 packets in both directions between two\
+| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
+| | And Initialize L2 xconnect with memif pairs
+| | Then Send IPv4 bidirectionally and verify received packets
+| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+
+*** Test Cases ***
+| tc01-64B-ethipv4-l2xcbase-eth-2memif-1dcr-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..dd74b2166b
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,113 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | container
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| ... | two static IPv6 /64 route entries. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running on \
+| ... | DUT.
+| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
+| ... | by TG on links to DUT1 and via container; on receive TG verifies \
+| ... | packets for correctness and their IPv6 src-addr, dst-addr and \
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv6 packets in both directions between two\
+| | ... | of its interfaces to be routed by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
+| | And Set interfaces in path up
+| | And Set up memif interfaces on DUT node
+| | ... | ${dut1} | memif-DUT1_CNF | memif-DUT1_CNF
+| | ... | memif_if1=memif_if1 | memif_if2=memif_if2
+| | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
+| | And Add Fib Table | ${dut1} | 20 | ipv6=${True}
+| | And Assign Interface To Fib Table
+| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
+| | And Assign Interface To Fib Table
+| | ... | ${dut1} | ${dut1_if2} | 20 | ipv6=${True}
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
+| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
+| | ... | ${memif_if2}
+| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
+| | And Vpp Route Add
+| | ... | ${dut1} | 2001:3::0 | 64 | gateway=2001:2::2 | interface=${memif_if1}
+| | And Vpp Route Add
+| | ... | ${dut1} | 2001:1::0 | 64 | gateway=2001:2::2 | interface=${memif_if2}
+| | ... | vrf=20
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | 2001:3::2 | ${tg_if2_mac}
+| | Then Send packet and verify headers
+| | ... | ${tg} | 2001:1::1 | 2001:3::2
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+
+*** Test Cases ***
+| tc01-78B-ethipv6-ip6base-eth-2memif-1dcr-dev
+| | [Tags] | 78B
+| | frame_size=${78} | phy_cores=${0}
-- 
cgit 1.2.3-korg