From f49a6734523f7e4ae26e357e4bd2c2df8c3de4d8 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 7 Jun 2019 13:44:52 +0000 Subject: vpp_device: IPsec - Remove VM ipsec tests as they are not interesting - Remove duplicate (vpp_device/virl) VM tests - Remove VM tunnel tests and use base tunnel (we do not need tunnel and VM) Change-Id: I5d7b6d8a037878f81a6bdc0114af481b32141dde Signed-off-by: Peter Mikus --- .../crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot | 125 +++++++++++++++++++++ 1 file changed, 125 insertions(+) create mode 100644 tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot (limited to 'tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot') diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot new file mode 100644 index 0000000000..43f9dcf078 --- /dev/null +++ b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot @@ -0,0 +1,125 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV +| ... | FUNCTEST | IP6FWD | IPSEC | IPSEC_TNL | IP6BASE +| ... +| Test Setup | Set up IPSec SW device functional test | IPv6 +| ... +| Test Teardown | Tear down VPP device test +| ... +| Documentation | *IPv6 IPsec tunnel mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure +| ... | loopback an physical interface IPv6 addresses, static ARP record, route +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip6}= | 3ffe:5f::1 +| ${dut_if_ip6}= | 3ffe:5f::2 +| ${tg_lo_ip6}= | 3ffe:60::3 +| ${dut_lo_ip6}= | 3ffe:60::4 +| ${ip6_plen}= | ${64} +| ${ip6_plen_rt}= | ${128} + +*** Test Cases *** +| tc01-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-256-128 +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| tc02-eth2p-ethip6ipsectnl-ip6base-device-aes-256-cbc-sha-256-128 +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| tc03-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-512-256 +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| tc04-eth2p-ethip6ipsectnl-ip6base-device-aes-256-cbc-sha-512-256 +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} -- cgit 1.2.3-korg