From f9041bcdc886ba08800fe11c32e218d98ef6ed33 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Mon, 3 Dec 2018 09:08:09 +0100 Subject: VPP_Device - add baseline tests - part I CSIT-1370 Add following baseline tests to VPP_Device: - ip4 eth2p-ethip4-ip4base-dev - ip6 eth2p-ethip6-ip6base-dev - l2bd eth2p-eth-l2bdbasemaclrn-dev Change-Id: Ic20000eb38c5511c27d020f3aa76b2620d7f7ef9 Signed-off-by: Jan Gelety --- .../device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot (limited to 'tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot') diff --git a/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot b/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot new file mode 100644 index 0000000000..553ed17029 --- /dev/null +++ b/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot @@ -0,0 +1,87 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV +| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | ICMP +| ... +| Test Setup | Set up VPP device test +| ... +| Test Teardown | Tear down VPP device test +| ... +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of\ +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all\ +| ... | links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ +| ... | switching. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1; on receive TG\ +| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| ${bd_id}= | 1 + +*** Test Cases *** +| tc01-eth2p-ethicmpv4-l2bdbase-device +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] Configure L2 bridge-domain (L2BD) with MAC learning enabled on\ +| | ... | DUT1. Add both interfaces towards TG to this L2BD. +| | ... | [Ver] Make TG send ICMPv4 Echo Req in both directions between two of\ +| | ... | its interfaces to be switched by DUT1; verify all packets are\ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in path up +| | And Create bridge domain | ${dut_node} | ${bd_id} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} + +| tc02-eth2p-ethicmpv6-l2bdbase-device +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] Configure L2 bridge-domain (L2BD) with MAC learning enabled on\ +| | ... | DUT1. Add both interfaces towards TG to this L2BD. +| | ... | [Ver] Make TG send ICMPv6 Echo Req in both directions between two of\ +| | ... | its interfaces to be switched by DUT1; verify all packets are\ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in path up +| | And Create bridge domain | ${dut_node} | ${bd_id} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv6 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -- cgit 1.2.3-korg