From f9041bcdc886ba08800fe11c32e218d98ef6ed33 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Mon, 3 Dec 2018 09:08:09 +0100 Subject: VPP_Device - add baseline tests - part I CSIT-1370 Add following baseline tests to VPP_Device: - ip4 eth2p-ethip4-ip4base-dev - ip6 eth2p-ethip6-ip6base-dev - l2bd eth2p-eth-l2bdbasemaclrn-dev Change-Id: Ic20000eb38c5511c27d020f3aa76b2620d7f7ef9 Signed-off-by: Jan Gelety --- .../device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot | 75 ++++++++++++++++++++++ .../l2xc/eth2p-ethicmp-l2xcbase-device.robot | 75 ---------------------- 2 files changed, 75 insertions(+), 75 deletions(-) create mode 100644 tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot delete mode 100644 tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-device.robot (limited to 'tests/vpp/device/l2xc') diff --git a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot b/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot new file mode 100644 index 0000000000..19920e604c --- /dev/null +++ b/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot @@ -0,0 +1,75 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV +| ... | FUNCTEST | L2XCFWD | BASE | ETH | ICMP +| ... +| Test Setup | Set up VPP device test +| ... +| Test Teardown | Tear down VPP device test +| ... +| Documentation | *L2 cross-connect test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of\ +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all\ +| ... | links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect\ +| ... | switching. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1; on receive TG\ +| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Test Cases *** +| tc01-eth2p-ethicmpv4-l2xcbase-device +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] Configure L2 cross-connects (L2XC) between both interfaces\ +| | ... | towards TG on DUT1. +| | ... | [Ver] Make TG send ICMPv4 Echo Req in both directions between two of\ +| | ... | its interfaces to be switched by DUT1; verify all packets are\ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in path up +| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv4 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} + +| tc02-eth2p-ethicmpv6-l2xcbase-device +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] Configure L2 cross-connects (L2XC) between both interfaces\ +| | ... | towards TG on DUT1. +| | ... | [Ver] Make TG send ICMPv6 Echo Req in both directions between two of\ +| | ... | its interfaces to be switched by DUT1; verify all packets are\ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set interfaces in path up +| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv6 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-device.robot b/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-device.robot deleted file mode 100644 index b18ce7bb77..0000000000 --- a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-device.robot +++ /dev/null @@ -1,75 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | L2XCFWD | ICMP -| ... -| Test Setup | Set up VPP device test -| ... -| Test Teardown | Tear down VPP device test -| ... -| Documentation | *L2 cross-connect test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of\ -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all\ -| ... | links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect\ -| ... | switching. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets\ -| ... | are sent in both directions by TG on links to DUT1; on receive TG\ -| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,\ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications: rfc792* - -*** Test Cases *** -| tc01-eth2p-ethicmpv4-l2xcbase-device -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC), with both interfaces\ -| | ... | to TG. -| | ... | [Ver] Make TG send ICMPv4 Echo Req in both directions between two of\ -| | ... | its interfaces to be switched by DUT1; verify all packets are -| | ... | received. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set Interfaces In 2-node Circular Topology Up -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send ICMPv4 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| tc02-eth2p-ethicmpv6-l2xcbase-device -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv6. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC), with both interfaces\ -| | ... | to TG. -| | ... | [Ver] Make TG send ICMPv4 Echo Req in both directions between two of\ -| | ... | its interfaces to be switched by DUT1; verify all packets are -| | ... | received. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set Interfaces In 2-node Circular Topology Up -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -- cgit 1.2.3-korg