From 9f5525de03c3d1cbca8b7e2a324414308645a9f3 Mon Sep 17 00:00:00 2001 From: pmikus Date: Tue, 17 Aug 2021 14:03:58 +0000 Subject: vpp_device: Multiple NICs (suitegen) Signed-off-by: pmikus Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c --- ...1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot | 95 ++++++++++++++++++++++ ...thip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot | 95 ++++++++++++++++++++++ ...x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot | 93 +++++++++++++++++++++ .../device/vm_vhost/ethip4/regenerate_testcases.py | 18 ++++ 4 files changed, 301 insertions(+) create mode 100644 tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot create mode 100644 tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot create mode 100644 tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot create mode 100755 tests/vpp/device/vm_vhost/ethip4/regenerate_testcases.py (limited to 'tests/vpp/device/vm_vhost/ethip4') diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot new file mode 100644 index 0000000000..61896d927c --- /dev/null +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.robot @@ -0,0 +1,95 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-eth-2vhost-1vm +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| +| Test Template | Local Template +| +| Documentation | *IPv4 routing test cases with vhost user interface* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ +| ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \ +| ... | vhost-user interfaces. Guest is running VPP ip4 interconnecting \ +| ... | vhost-user interfaces. +| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \ +| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \ +| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} +| ${tg_if1_ip}= | 10.10.10.2 +| ${tg_if2_ip}= | 20.20.20.2 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | Test uses two VRFs to route IPv4 traffic through two vhost-user \ +| | ... | nterfaces. Both interfaces are configured with IP addresses from \ +| | ... | the same network. The VM is running VPP IPv4 forwarding to pass \ +| | ... | packet from one vhost-user interface to the other one. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding with vhost in 2-node circular topology +| | ... | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} +| | ... | vnf=vppip4noarp_2vhostvr1024 | pinning=${False} +| | Then Send packet and verify headers +| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip} +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 64B-0c-ethip4-ip4base-eth-2vhost-1vm-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot new file mode 100644 index 0000000000..ee32bd04c6 --- /dev/null +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.robot @@ -0,0 +1,95 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-l2bdbasemaclrn-eth-2vhost-1vm +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| +| Test Template | Local Template +| +| Documentation | *L2 bridge-domain test cases with vhost user interface* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ +| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ +| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ +| ... | configured with VPP l2 cross-connect interconnecting vhost-user \ +| ... | interfaces. +| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \ +| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \ +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ +| | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \ +| | ... | two virtio i/fs. [Ver] Make TG verify IPv4 packets are switched \ +| | ... | thru DUT1 and VM in both directions and are correct on receive. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | ... | count=${nf_chains} +| | And Initialize L2 bridge domains with Vhost-User | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} +| | ... | vnf=vppl2xc_2vhostvr1024 | pinning=${False} +| | Then Send IPv4 bidirectionally and verify received packets | ${tg} +| | ... | ${TG_pf1}[0] | ${TG_pf2}[0] + +*** Test Cases *** +| 64B-0c-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot new file mode 100644 index 0000000000..7fc076bbad --- /dev/null +++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot @@ -0,0 +1,93 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-l2xcbase-eth-2vhost-1vm +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| +| Test Template | Local Template +| +| Documentation | *L2 cross-connect test cases with vhost user interface* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ +| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \ +| ... | interfaces. Guest is configured with VPP l2 cross-connect \ +| ... | interconnecting vhost-user interfaces. +| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \ +| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \ +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \ +| | ... | two L2 cross-connects (L2XC), each with one untagged interface \ +| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \ +| | ... | TG send IPv4 packets in both directions between two of its \ +| | ... | i/fs to be switched by DUT to and from VM; verify all packets \ +| | ... | are received. [Ref] +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} +| | ... | vnf=vppl2xc_2vhostvr1024 | pinning=${False} +| | Then Send IPv4 bidirectionally and verify received packets | ${tg} +| | ... | ${TG_pf1}[0] | ${TG_pf2}[0] + +*** Test Cases *** +| 64B-0c-ethip4-l2xcbase-eth-2vhost-1vm-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/ethip4/regenerate_testcases.py b/tests/vpp/device/vm_vhost/ethip4/regenerate_testcases.py new file mode 100755 index 0000000000..87521e662d --- /dev/null +++ b/tests/vpp/device/vm_vhost/ethip4/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python3 + +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob(u"*.robot") -- cgit 1.2.3-korg