From 0cf1f0204e326cf93e36b344e2efd3cfa2f82870 Mon Sep 17 00:00:00 2001 From: Marek Gradzki Date: Mon, 19 Mar 2018 21:12:03 +0100 Subject: HC Tests: move honeycomb tests out of vpp directory https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation to vpp/func/__init__.robot, which is run before Honeycomb suite. Instalation process starts with removing all vpp packages, which fails because of honeycomb dependency installed by bootstrap script. This patch fixes HC func jobs by moving them to separate dir. The honeycomb/func/__init__.robot was updated to include previous content of vpp/func/__init__.robot. HC perf jobs were also moved, but they may require additional care (CSIT-1006). Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663 Signed-off-by: Marek Gradzki --- .../mgmt-cfg-lisp-apihc-apivat-func.robot | 310 --------------------- 1 file changed, 310 deletions(-) delete mode 100644 tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot') diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot deleted file mode 100644 index 0198e8205c..0000000000 --- a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot +++ /dev/null @@ -1,310 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -| ${ip_address}= | 192.168.0.4 -| @{ip_addresses}= | 192.168.0.5 | 192.168.0.6 | 192.168.0.7 | 192.168.0.8 -| ${state}= | enabled -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${bd_name}= | bd_lisp -| ${bd2_name}= | bd2_lisp -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${True} - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/lisp.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Variables | resources/test_data/honeycomb/lisp/lisp.py -| ... -| Documentation | *Honeycomb Lisp test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Test Cases *** -| TC01: Honeycomb enables LISP feature -| | [Documentation] | Check if Honeycomb can enable the LISP feature. -| | ... -| | Given LISP Should Not Be Configured | ${node} -| | When Honeycomb enables LISP | ${node} -| | Then LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} - -| TC02: Honeycomb adds locator set and locator -| | [Documentation] | Check if Honeycomb can configure a locator set. -| | ... -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Then Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} - -| TC15: Honeycomb can remove configuration of LISP features -| | [Documentation] | Check if Honeycomb can disable all LISP features. -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | When Honeycomb disables all LISP features | ${node} -| | Then LISP Should Not Be Configured | ${node} - -| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} - -| TC04: Honeycomb can remove LISP mapping -| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping. -| | ... -| | Given LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_bd_subtable} -| | And LISP mapping from VAT should be -| | ... | ${node} | ${vat_remote_bd} -| | When Honeycomb removes all LISP mappings | ${node} -| | Then LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} - -| TC05: Honeycomb configures LISP - remote mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${remote_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf} - -| TC06: Honeycomb configures LISP - local mapping - Bridge Domain -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with a bridge domain. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd2_name} | ${bd_settings} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd} - -| TC07: Honeycomb configures LISP - local mapping - VRF -| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\ -| | ... | with VRF. -| | ... -| | [Teardown] | Honeycomb removes all LISP mappings | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf} -| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable} -| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf} - -| TC08: Honeycomb configures LISP mapping with adjacency -| | [Documentation] | Check if Honeycomb can configure local and remote LISP\ -| | ... | mappings with VRF, and configure adjacency. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | ... -| | Given Locator Set From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${locator_set} -| | And LISP mappings from Honeycomb should not exist -| | ... | ${node} -| | And LISP mappings from VAT should not exist -| | ... | ${node} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf} -| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf -| | ... | adj01 | ${vrf_adjacency} -| | Then LISP mapping from Honeycomb should be -| | ... | ${node} | ${adj_subtable} - -| TC09: Honeycomb configures LISP Map Resolver -| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address} -| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address} -| | And Map Resolver from VAT should be | ${node} | ${ip_address} - -| TC10: Honeycomb configures LISP Map Server -| | [Documentation] | Check if Honeycomb can configure a LISP Map Server. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses} -| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses} -| | And Map Server from VAT should be | ${node} | @{ip_addresses} - -| TC11: Honeycomb configures LISP PETR configuration -| | [Documentation] | Check if Honeycomb can configure LISP -| | ... | PETR configuration. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address} -| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address} -| | And PETR configuration from VAT should be | ${node} | enabled - -| TC12: Honeycomb configures LISP RLOC Probing -| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb enables LISP RLOC feature | ${node} -| | Then RLOC Probing from Honeycomb should be | ${node} | ${True} -| | And RLOC Probing from VAT should be | ${node} | enabled - -| TC13: Honeycomb configures LISP Map Register -| | [Documentation] | Check if Honeycomb can configure a LISP Map Register. -| | ... -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | Given LISP state from Honeycomb should be | ${node} | ${state} -| | And LISP state from VAT should be | ${node} | ${state} -| | When Honeycomb adds LISP Map Register | ${node} | ${True} -| | Then Map Register from Honeycomb should be | ${node} | ${True} -| | And Map Register from VAT should be | ${node} | enabled - -| TC14: Honeycomb enabled LISP PITR feature -| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature. -| | ... -# HC2VPP-263 Locator set reference in operational data is incorrect -| | [Tags] | EXPECTED_FAILING -| | [Teardown] | Honeycomb disables all LISP features | ${node} -| | Given Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} -| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set} -| | Then PITR config from Honeycomb should be | ${node} | ${locator_set} -| | And PITR config from VAT should be | ${node} | ${locator_set} - -| TC16: Honeycomb can configure LISP for traffic test - IPv4 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-LISP. -| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip4} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc4} | ${dst_rloc4} - -| TC17: Honeycomb can configure LISP for traffic test - IPv6 -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv6-LISP. -| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\ -| | ... | DUT1 and verify LISP encapsulation of received packet. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | LISP Functional Traffic Test Teardown -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${src_ip6} | ${tg_to_dut_if1_mac} -| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac} -| | When Honeycomb enables LISP | ${node} -| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set} -| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6} -| | Then send packet and verify LISP encap -| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${src_rloc6} | ${dst_rloc6} - -| TC18: Honeycomb configures LISP Map Request Mode -| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode. -| | ... | Note: Map Request Mode cannot be removed once configured. -| | ... -| | [Teardown] | Honeycomb disables LISP | ${node} -| | ... -| | Given Honeycomb Enables LISP | ${node} -| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True} -| | Then Map Request Mode from Honeycomb should be -| | ... | ${node} | source-destination -| | And Map Request Mode from VAT should be | ${node} | src-dst -- cgit 1.2.3-korg