From 6721e7f09aa95bff6622068332a3f56afad9c87b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Tue, 20 Jun 2017 13:57:08 +0200 Subject: CSIT-687: Directory structure reorganization Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank Signed-off-by: Maciek Konstantynowicz --- tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot | 120 +++++++++++++++++++++ 1 file changed, 120 insertions(+) create mode 100644 tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot (limited to 'tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot') diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot new file mode 100644 index 0000000000..bd0b2a6b64 --- /dev/null +++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/shared/counters.robot +| Resource | resources/libraries/robot/shared/default.robot +| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH +| Suite Setup | Run Keywords +| ... | Configure IPv6 on all DUTs in topology | ${nodes} | ${nodes_ipv6_addr} | AND +| ... | Suppress ICMPv6 router advertisement message | ${nodes} | AND +| ... | Configure IPv6 routing on all DUTs | ${nodes} | ${nodes_ipv6_addr} | AND +| ... | Configure all TGs for traffic script +| Test Setup | Run Keywords | Save VPP PIDs | AND +| ... | Reset VAT History On All DUTs | ${nodes} | AND +| ... | Clear interface counters on all vpp nodes in topology | ${nodes} +| Test Teardown | Run Keywords +| ... | Show packet trace on all DUTs | ${nodes} | AND +| ... | Show VAT History On All DUTs | ${nodes} | AND +| ... | Verify VPP PID in Teardown +| Documentation | *IPv6 routing test cases* +| ... +| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery. +| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2; +| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node +| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and +| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6 +| ... | Echo Request packets are sent in both directions by TG on links to DUT1 +| ... | and DUT2 and received on TG links on the other side of circular +| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC +| ... | addresses. + +*** Test Cases *** +| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\ +| | ... | verify ICMPv6 Echo Reply is correct. +| | Send IPv6 icmp echo request to DUT1 ingress inteface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr} + +| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\ +| | ... | incrementating frame size from 64B to 1500B with increment step +| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct. +| | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr} + +| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\ +| | ... | incrementating frame size from 1500B to 9000B with increment +| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct. +| | [Setup] | Configure MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']} +| | [Teardown] | Run keywords +| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']} +| | ... | AND | Verify VPP PID in Teardown +| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} +| | Compute Path +| | ${dut_port} | ${dut_node}= | Last Interface +| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port} +| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS, +| | # IPv6 header and ICMPv6 header +| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8 +| | Run Keyword If | ${mtu} > 1518 +| | ... | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr} + +| TC04: DUT routes to its egress interface +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\ +| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct. +| | Send IPv6 ICMP echo request to DUT1 egress interface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | +| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} + +| TC05: DUT1 routes to DUT2 ingress interface +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\ +| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct. +| | Send IPv6 ICMP echo request to DUT2 via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} + +| TC06: DUT1 routes to DUT2 egress interface +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\ +| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct. +| | Send IPv6 ICMP echo request to DUT2 egress interface via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} + +| TC07: DUT1 and DUT2 route between TG interfaces +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\ +| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct. +| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} +| | ... | ${nodes_ipv6_addr} + +| TC08: DUT replies to IPv6 Neighbor Solicitation +| | [Tags] | VM_ENV +| | [Documentation] +| | ... | On DUT configure interface IPv6 address in the main routing\ +| | ... | domain. Make TG send Neighbor Solicitation message on the link +| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct. +| | Send IPv6 neighbor solicitation and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr} -- cgit 1.2.3-korg