From d5e7718b186ff98d0d1011bded653e86db263c50 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Sun, 9 Jun 2019 06:44:04 +0000 Subject: vpp_device: TAP Change-Id: Ife31921daaa5a87f64e61d2eebb98bfdded1dc76 Signed-off-by: Peter Mikus --- tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot | 120 --------------------- 1 file changed, 120 deletions(-) delete mode 100644 tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot (limited to 'tests/vpp/func/ip6') diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot deleted file mode 100644 index d4b7939a9b..0000000000 --- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot +++ /dev/null @@ -1,120 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH -| Suite Setup | Run Keywords -| ... | Configure IPv6 on all DUTs in topology | ${nodes} | ${nodes_ipv6_addr} | AND -| ... | Suppress ICMPv6 router advertisement message | ${nodes} | AND -| ... | Configure IPv6 routing on all DUTs | ${nodes} | ${nodes_ipv6_addr} | AND -| ... | Configure all TGs for traffic script -| Test Setup | Run Keywords | Save VPP PIDs | AND -| ... | Reset PAPI History On All DUTs | ${nodes} | AND -| ... | Clear interface counters on all vpp nodes in topology | ${nodes} -| Test Teardown | Run Keywords -| ... | Show packet trace on all DUTs | ${nodes} | AND -| ... | Show PAPI History On All DUTs | ${nodes} | AND -| ... | Verify VPP PID in Teardown -| Documentation | *IPv6 routing test cases* -| ... -| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery. -| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2; -| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node -| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and -| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6 -| ... | Echo Request packets are sent in both directions by TG on links to DUT1 -| ... | and DUT2 and received on TG links on the other side of circular -| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC -| ... | addresses. - -*** Test Cases *** -| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\ -| | ... | verify ICMPv6 Echo Reply is correct. -| | Send IPv6 icmp echo request to DUT1 ingress inteface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr} - -| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\ -| | ... | incrementating frame size from 64B to 1500B with increment step -| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct. -| | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr} - -| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\ -| | ... | incrementating frame size from 1500B to 9000B with increment -| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct. -| | [Setup] | Configure MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']} -| | [Teardown] | Run keywords -| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']} -| | ... | AND | Verify VPP PID in Teardown -| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} -| | Compute Path -| | ${dut_port} | ${dut_node}= | Last Interface -| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port} -| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS, -| | # IPv6 header and ICMPv6 header -| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8 -| | Run Keyword If | ${mtu} > 1518 -| | ... | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr} - -| TC04: DUT routes to its egress interface -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\ -| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct. -| | Send IPv6 ICMP echo request to DUT1 egress interface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | -| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} - -| TC05: DUT1 routes to DUT2 ingress interface -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\ -| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct. -| | Send IPv6 ICMP echo request to DUT2 via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} - -| TC06: DUT1 routes to DUT2 egress interface -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\ -| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct. -| | Send IPv6 ICMP echo request to DUT2 egress interface via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr} - -| TC07: DUT1 and DUT2 route between TG interfaces -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\ -| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct. -| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | ... | ${nodes_ipv6_addr} - -| TC08: DUT replies to IPv6 Neighbor Solicitation -| | [Tags] | VM_ENV -| | [Documentation] -| | ... | On DUT configure interface IPv6 address in the main routing\ -| | ... | domain. Make TG send Neighbor Solicitation message on the link -| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct. -| | Send IPv6 neighbor solicitation and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr} -- cgit 1.2.3-korg