From 6721e7f09aa95bff6622068332a3f56afad9c87b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Tue, 20 Jun 2017 13:57:08 +0200 Subject: CSIT-687: Directory structure reorganization Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank Signed-off-by: Maciek Konstantynowicz --- .../eth2p-ethip6lisp-l2bdbasemaclrn-func.robot | 96 ++++++++++ .../lisp/eth2p-ethip6lispgpe-ip4base-func.robot | 108 +++++++++++ .../lisp/eth2p-ethip6lispgpe-ip6base-func.robot | 107 +++++++++++ .../lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot | 112 ++++++++++++ .../eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot | 80 ++++++++ ...h4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot | 203 +++++++++++++++++++++ 6 files changed, 706 insertions(+) create mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot create mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot create mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot create mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot create mode 100644 tests/vpp/func/ip6_tunnels/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot create mode 100644 tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot (limited to 'tests/vpp/func/ip6_tunnels') diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..6927dacde4 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot @@ -0,0 +1,96 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.L2Util +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip4.robot +| Resource | resources/libraries/robot/overlay/l2lisp.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/l2/l2_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down functional test +| ... +| Documentation | *l2-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP6-ICMPv6-LISPGpe-IP6 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ +| ... | domains and neighbors. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: Route IPv6 packet through LISP with Bridge Domain setup. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IP6-ICMPv6-LISPGpe-IP6 +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. Also\ +| | ... | configure BD and assign it to LISP VNI. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP tunnel between them; verify IPv6, Ether headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | When Create L2 BD | ${dut1_node} | ${vpp_bd_id} +| | And Add Interface To L2 BD | ${dut1_node} | ${dut1_to_tg} | ${vpp_bd_id} +| | And Create L2 BD | ${dut2_node} | ${vpp_bd_id} +| | And Add Interface To L2 BD | ${dut2_node} | ${dut2_to_tg} | ${vpp_bd_id} +| | And Configure L2 LISP on DUT | ${dut1_node} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${lisp_dut_settings} +| | And Configure L2 LISP on DUT | ${dut2_node} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ... | ${lisp_dut_settings} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_if1_mac} | ${tg_if2_mac} +| | ... | ${tg_to_dut2} | ${tg_if1_mac} | ${tg_if2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_if2_mac} | ${tg_if1_mac} +| | ... | ${tg_to_dut1} | ${tg_if2_mac} | ${tg_if1_mac} diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot new file mode 100644 index 0000000000..08fc5c76c6 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot @@ -0,0 +1,108 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip4.robot +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.Trace +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down functional test +| ... +| Documentation | *LISP static adjacency test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4-ICMPv4 on\ +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6\ +| ... | tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured\ +| ... | between DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv4 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received\ +| | ... | packets are correct. +| | ... | [Cfg2] Reconf LISP. +| | ... | [Ver2] Verify packets are received again via LISP tunnel. +| | ... | [Ref] RFC6830. +| | ... +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6} +| | ... | ${dut1_node} | ${dut1_to_tg} +| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6} +| | ... | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6} +| | ... | ${dut2_node} | ${dut2_to_tg} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6} +| | ... | ${tg_to_dut2_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6} +| | ... | ${tg_to_dut1_mac} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | When Configure LISP topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} +| | When Change LISP Configuration | ${dut1_node} | ${dut2_node} +| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac} +| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip4o6} +| | ... | ${dut2_to_dut1_ip4o6_reconf} | ${dut_prefix4o6} +| | ... | ${dut1_ip4o6_static_adjacency} +| | ... | ${dut1_ip4o6_static_adjacency_reconf} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot new file mode 100644 index 0000000000..43f19740e3 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot @@ -0,0 +1,107 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Set up functional test +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | When Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs. +| | ... +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot new file mode 100644 index 0000000000..5d3d969426 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot @@ -0,0 +1,112 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Set up functional test +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | When Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs. +| | ... +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/ip6_tunnels/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip6_tunnels/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..165da28bd2 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,80 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/overlay/vxlan.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/vm/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv6Setup +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *Bridge-domain with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 bridge-domain (MAC learning enabled), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other +| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its +| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets +| | ... | are received. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | And Add interfaces to L2BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Add interfaces to L2BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send ICMPv6 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..115883f1b1 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,203 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/overlay/vxlan.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/vm/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv6Setup +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured +| ... | between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure +| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged +| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make +| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be +| | ... | switched by DUT1 and DUT2; verify packets are not switched between +| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. +| | ... | [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Set interfaces in 3-node BD-SHG test up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg1} +| | And Create bridge domain | ${dut2_node} | ${bd_id2} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Create bridge domain | ${dut2_node} | ${bd_id3} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMPv6 bidirectionally and verify received packets +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 +| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one +| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces +| | ... | to be switched by DUT1 and DUT2; verify packets are switched between +| | ... | all TG interfaces. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Set interfaces in 3-node BD-SHG test up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg2} +| | And Create bridge domain | ${dut2_node} | ${bd_id2} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Create bridge domain | ${dut2_node} | ${bd_id3} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut2_if1} +| | ... | ${tg_to_dut2_if2} -- cgit 1.2.3-korg