From 10e0393fde6d919cf0e5848bc5e506d981642ef8 Mon Sep 17 00:00:00 2001
From: Tibor Frank <tifrank@cisco.com>
Date: Fri, 14 Jun 2019 09:26:38 +0200
Subject: VAT-to-PAPI: Classify

Change-Id: Ic06a0a65429680e6ecdc3f5288d091c2c2630921
Signed-off-by: Tibor Frank <tifrank@cisco.com>
---
 .../l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot    | 63 +++++++++++-----------
 1 file changed, 31 insertions(+), 32 deletions(-)

(limited to 'tests/vpp/func/l2xc')

diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
index b62f0f8731..c12a6100f4 100644
--- a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
+++ b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -31,17 +31,16 @@
 | ... |        DUT1 is configured with iACL classification on link to TG,
 | ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
 | ... |        in one direction by TG on link to DUT1 and received on TG link
-| ... |        to DUT2. On receive TG verifies if packets are dropped.
+| ... |        to DUT2. On receive TG verifies if packets are accepted.
 
 *** Variables ***
 | ${l2_table}= | l2
 
 *** Test Cases ***
-| TC01: DUT with iACL MAC src-addr drops matching pkts
+| TC01: DUT with iACL MAC src-addr accepts matching pkts
 | | [Documentation]
 | | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'permit'.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
@@ -52,21 +51,21 @@
 | | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 | | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
 | | ... | src | ${tg_to_dut1_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index} | src | ${tg_to_dut1_mac}
 | | And Vpp Enable Input ACL Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 
-| TC02: DUT with iACL MAC dst-addr drops matching pkts
+| TC02: DUT with iACL MAC dst-addr accepts matching pkts
 | | [Documentation]
 | | ... | [Top] TG-DUT1-DUT2-TG.
 | | ... | [Cfg] On DUT1 add destination MAC address to classify
-| | ... |       table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | table with 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
@@ -77,21 +76,21 @@
 | | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 | | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
 | | ... | dst | ${tg_to_dut2_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index} | dst | ${tg_to_dut2_mac}
 | | And Vpp Enable Input ACL Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 
-| TC03: DUT with iACL MAC src-addr and dst-addr drops matching pkts
+| TC03: DUT with iACL MAC src-addr and dst-addr accepts matching pkts
 | | [Documentation]
 | | ... | [Top] TG-DUT1-DUT2-TG.
 | | ... | [Cfg] On DUT1 add source and destination MAC address to classify
-| | ... |       table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | table with 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
@@ -102,27 +101,28 @@
 | | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 | | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
 | | ... | src | ${tg_to_dut1_mac}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
 | | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${dut1_node} | permit | ${table_index_1} | src | ${tg_to_dut1_mac}
+| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
 | | ... | dst | ${tg_to_dut1_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index_2} | dst | ${tg_to_dut1_mac}
 | | And Vpp Enable Input ACL Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
 | | And Vpp Enable Input ACL Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
 
-| TC04: DUT with iACL EtherType drops matching pkts
+| TC04: DUT with iACL EtherType accepts matching pkts
 | | [Documentation]
 | | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with
+| | ... | 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
 | | Given Configure path in 3-node circular topology
 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 | | And Set interfaces in 3-node circular topology up
@@ -136,9 +136,8 @@
 | | ... | When Vpp Creates Classify Table Hex
 | | ... | ${dut1_node} | 000000000000000000000000ffff
 | | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 0000000000000000000000000800
+| | ... | ${dut1_node} | permit | ${table_index} | 0000000000000000000000000800
 | | And Vpp Enable Input ACL Interface
 | | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
 | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-- 
cgit 1.2.3-korg