From 6721e7f09aa95bff6622068332a3f56afad9c87b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Tue, 20 Jun 2017 13:57:08 +0200 Subject: CSIT-687: Directory structure reorganization Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank Signed-off-by: Maciek Konstantynowicz --- ...p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot | 189 +++++++++++ .../vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot | 69 ++++ .../eth2p-dot1ad-l2xcbase-vlantrans22-func.robot | 346 +++++++++++++++++++++ ...p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot | 335 ++++++++++++++++++++ .../eth2p-dot1q-l2xcbase-vlantrans11-func.robot | 171 ++++++++++ tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot | 74 +++++ .../l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot | 144 +++++++++ 7 files changed, 1328 insertions(+) create mode 100644 tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-dot1q-l2xcbase-vlantrans11-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot create mode 100644 tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot (limited to 'tests/vpp/func/l2xc') diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot new file mode 100644 index 0000000000..c0e8c5c899 --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot @@ -0,0 +1,189 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2 +| ... | for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-2-1 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot new file mode 100644 index 0000000000..f030e618f7 --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot @@ -0,0 +1,69 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2 cross-connect with QinQ test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, +| ... | Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | cross-connect (L2XC) switching with 802.1ad QinQ VLAN tag push and pop. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and +| ... | MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 +| ${outer_vlan_id}= | 100 +| ${inner_vlan_id}= | 200 +| ${type_subif}= | two_tags +| ${tag_rewrite_method}= | pop-2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and two VLAN push-pop switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 cross-connect (L2XC), each with one interface to TG +| | ... | and one Ethernet interface towards the other DUT; each DUT +| | ... | pushes two VLAN tags on packets received from local TG, and +| | ... | popping two VLAN tags on packets transmitted to local TG. [Ver] +| | ... | Make TG send ICMPv4 Echo Req in both directions between two of +| | ... | its interfaces to be switched by DUT1 and DUT2; verify all +| | ... | packets are received. [Ref] IEEE 802.1ad. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | When Initialize VLAN sub-interfaces in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} +| | And Configure L2 tag rewrite method on interfaces +| | ... | ${dut1_node} | ${subif_index_1} | ${dut2_node} | ${subif_index_2} +| | ... | ${tag_rewrite_method} +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subif_index_1} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${subif_index_2} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot new file mode 100644 index 0000000000..14406da97f --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot @@ -0,0 +1,346 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-2* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-2-2 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 +| ${inner_vlan_id2}= | 220 +| ${inner_vlan_wrong}= | 250 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and +| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another +| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC05: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and +| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC06: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another +| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot b/tests/vpp/func/l2xc/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot new file mode 100644 index 0000000000..6952d368b8 --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot @@ -0,0 +1,335 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-2* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 +| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-1-2 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 +| ${inner_vlan_id2}= | 220 +| ${inner_vlan_wrong}= | 250 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set inner tag different from inner tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer tag different from outer tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer and inner tags different from tags +| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 +| | ... | cross-connect with one interface to TG and one Dot1ad sub-interface +| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send +| | ... | ICMPv4 Echo Req tagged with one Dot1q tag from one of its interfaces +| | ... | to another one via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC06: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set inner tag different from inner tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC07: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer tag different from outer tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC08: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer and inner tags different from tags +| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 +| | ... | cross-connect with one interface to TG and one Dot1ad sub-interface +| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send +| | ... | ICMPv6 Echo Req tagegd with one Dot1q tag from one of its interfaces +| | ... | to another one via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | type_subif=two_tags dot1ad +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-2 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-dot1q-l2xcbase-vlantrans11-func.robot b/tests/vpp/func/l2xc/eth2p-dot1q-l2xcbase-vlantrans11-func.robot new file mode 100644 index 0000000000..49039e9db9 --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-dot1q-l2xcbase-vlantrans11-func.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/tagging.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv4-ICMPv4 on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-1-1 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one VLAN tagged sub-interface to DUT2 and +| | ... | one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | (translate-1-1) on sub-interface to DUT2; on DUT2 configure L2XC with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with VLAN +| | ... | tag pop-1. [Ver] Make TG send ICMPv4 Echo Req tagged with one dot1q +| | ... | tag from one of its interfaces to another one via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method +| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot new file mode 100644 index 0000000000..37ccfc47cf --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-func.robot @@ -0,0 +1,74 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.NodePath +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *L2 cross-connect test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4; +| ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | cross-connect (L2XC) switching. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are +| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface +| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] +| | ... | Make TG send ICMPv4 Echo Req in both directions between two of +| | ... | its interfaces to be switched by DUT1 and DUT2; verify all +| | ... | packets are received. [Ref] +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} +| | And Configure L2XC | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv4 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} + +| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \ +| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface +| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] +| | ... | Make TG send ICMPv6 Echo Req in both directions between two of +| | ... | its interfaces to be switched by DUT1 and DUT2; verify all +| | ... | packets are received. [Ref] +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} +| | And Configure L2XC | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send ICMPv6 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot new file mode 100644 index 0000000000..b62f0f8731 --- /dev/null +++ b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot @@ -0,0 +1,144 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/counters.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Classify.Classify +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *Ingress ACL test cases* +| ... +| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG +| ... | with one link between the nodes. +| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect. +| ... | DUT1 is configured with iACL classification on link to TG, +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in one direction by TG on link to DUT1 and received on TG link +| ... | to DUT2. On receive TG verifies if packets are dropped. + +*** Variables *** +| ${l2_table}= | l2 + +*** Test Cases *** +| TC01: DUT with iACL MAC src-addr drops matching pkts +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'deny'. +| | ... | [Ver] Make TG verify matching packets are dropped. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg} +| | And Configure L2XC +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src +| | And Vpp Configures Classify Session L2 +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | src | ${tg_to_dut1_mac} +| | And Vpp Enable Input ACL Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index} +| | Then ICMP packet transmission should fail +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} + +| TC02: DUT with iACL MAC dst-addr drops matching pkts +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 add destination MAC address to classify +| | ... | table with 'deny'. +| | ... | [Ver] Make TG verify matching packets are dropped. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg} +| | And Configure L2XC +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst +| | And Vpp Configures Classify Session L2 +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | dst | ${tg_to_dut2_mac} +| | And Vpp Enable Input ACL Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index} +| | Then ICMP packet transmission should fail +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} + +| TC03: DUT with iACL MAC src-addr and dst-addr drops matching pkts +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 add source and destination MAC address to classify +| | ... | table with 'deny'. +| | ... | [Ver] Make TG verify matching packets are dropped. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg} +| | And Configure L2XC +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | ${table_index_1} | ${skip_n_1} | ${match_n_1}= +| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src +| | And Vpp Configures Classify Session L2 +| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1} +| | ... | src | ${tg_to_dut1_mac} +| | ${table_index_2} | ${skip_n_2} | ${match_n_2}= +| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst +| | And Vpp Configures Classify Session L2 +| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2} +| | ... | dst | ${tg_to_dut1_mac} +| | And Vpp Enable Input ACL Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1} +| | And Vpp Enable Input ACL Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2} +| | Then ICMP packet transmission should fail +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} + +| TC04: DUT with iACL EtherType drops matching pkts +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with 'deny'. +| | ... | [Ver] Make TG verify matching packets are dropped. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure L2XC +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg} +| | And Configure L2XC +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send ICMP packet and verify received packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | When Vpp Creates Classify Table Hex +| | ... | ${dut1_node} | 000000000000000000000000ffff +| | And Vpp Configures Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | 0000000000000000000000000800 +| | And Vpp Enable Input ACL Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index} +| | Then ICMP packet transmission should fail +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -- cgit 1.2.3-korg