From 87c41b8df8b3c50a90e9d3d740ac629028109dc1 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Fri, 12 Jul 2019 13:13:00 +0200 Subject: Remove un-interested VIRL tests and related resources Change-Id: I712f5dc238fdf480c7c35250148c12d03ed96d74 Signed-off-by: Jan Gelety --- .../eth2p-ethip4-ip4base-ip4dhcpclient-func.robot | 119 ----- .../eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot | 96 ---- .../eth2p-ethip4-ip4base-ip4proxyarp-func.robot | 158 ------- ...ethip6ip4-ip4base--ip6base-swirelw46-func.robot | 215 --------- ...ethip6ip4-ip4base--ip6base-swiremape-func.robot | 490 --------------------- ...ethip6ip4-ip4base--ip6base-swiremapt-func.robot | 140 ------ .../eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot | 71 --- 7 files changed, 1289 deletions(-) delete mode 100644 tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot delete mode 100644 tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot delete mode 100644 tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot delete mode 100644 tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot delete mode 100644 tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot delete mode 100644 tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot delete mode 100644 tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot (limited to 'tests/vpp/func') diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot deleted file mode 100644 index 3dbb2abb11..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot +++ /dev/null @@ -1,119 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/features/dhcp_client.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | DHCPv4 Client related test cases - -*** Variables *** -| ${client_hostname}= | dhcp-client -| ${client_ip}= | 192.168.23.10 -| ${client_mask}= | 255.255.255.0 -| ${server_ip}= | 192.168.23.1 -| ${own_xid}= | 11112222 -| ${lease_time}= | ${15} - -*** Test Cases *** -| TC01: VPP sends a DHCP DISCOVER -| | [Documentation] | Configure DHCPv4 client on interface to TG without -| | ... | hostname and check if DHCPv4 DISCOVER message contains all -| | ... | required fields with expected values. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Verify DHCP DISCOVER header | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} - -| TC02: VPP sends a DHCPv4 DISCOVER with hostname -| | [Documentation] | Configure DHCPv4 client on interface to TG with hostname -| | ... | and check if DHCPv4 DISCOVER message contains all required -| | ... | fields with expected values. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${client_hostname} -| | Then Verify DHCP DISCOVER header | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${client_hostname} - -| TC03: VPP sends DHCPv4 REQUEST after OFFER -| | [Documentation] | Configure DHCPv4 client on interface to TG and check if -| | ... | DHCPv4 REQUEST message contains all required fields. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Verify DHCP REQUEST after OFFER | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${dut_to_tg_if1_mac} | ${client_ip} | ${client_mask} - -| TC04: VPP doesn't send DHCPv4 REQUEST after OFFER with wrong XID -| | [ Tags ] | EXPECTED_FAILING -| | [Documentation] | Configure DHCPv4 client on interface to TG. If server -| | ... | sends DHCPv4 OFFER with different XID as in DHCPv4 -| | ... | DISCOVER, DHCPv4 REQUEST message shouldn't be sent. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Run Keyword And Expect Error | DHCP REQUEST Rx timeout -| | ... | Verify DHCP REQUEST after OFFER | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${dut_to_tg_if1_mac} | ${client_ip} | ${client_mask} -| | ... | offer_xid=${own_xid} - -| TC05: VPP honors DHCPv4 lease time -| | [Documentation] | Send IP configuration to the VPP client via DHCPv4. -| | ... | Address is checked with ICMP echo request and there should -| | ... | be no reply for echo request when lease has expired. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | And Configure IP on client via DHCP -| | ... | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${client_ip} | ${client_mask} -| | ... | ${lease_time} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${server_ip} -| | ... | ${tg_to_dut_if1_mac} -| | Then Send ICMP echo request and verify answer -| | ... | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} | ${client_ip} -| | ... | ${server_ip} -| | And Sleep | ${lease_time} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP echo request and verify answer | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} -| | ... | ${client_ip} | ${server_ip} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot deleted file mode 100644 index 24514d018b..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot +++ /dev/null @@ -1,96 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/features/dhcp_proxy.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *DHCPv4 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG = DUT -| ... | with two links between the nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-BOOTP-DHCP -| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv4 proxy. -| ... | *[Ver] TG verification:* Test DHCPv4 packets are sent -| ... | on TG on first link to DUT and received on TG on second link. -| ... | On receive TG verifies if DHCPv4 packets are valid. - -*** Variables *** -| ${dut_to_tg_if1_ip}= | 172.16.0.1 -| ${dut_to_tg_if2_ip}= | 192.168.0.1 -| ${dhcp_server_ip}= | 192.168.0.100 -| ${client_ip}= | 172.16.0.2 -| ${prefix_length}= | 24 - -| ${discover_src_ip}= | 0.0.0.0 -| ${valid_discover_dst_ip}= | 255.255.255.255 -| ${invalid_discover_dst_ip}= | 255.255.255.1 - -*** Test Cases *** -| TC01: VPP proxies valid DHCPv4 request to DHCPv4 server -| | [Documentation] | -| | ... | [Top] TG=DUT \ -| | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCPv4 proxy. -| | ... | [Ver] Make TG verify matching DHCPv4 packets between client and DHCPv4 -| | ... | server through DHCP proxy. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${True} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip} -| | ... | ${tg_to_dut_if2_mac} -| | When DHCP Proxy Config | ${dut_node} | ${dhcp_server_ip} -| | ... | ${dut_to_tg_if1_ip} -| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${dhcp_server_ip} | ${tg_to_dut_if2_mac} -| | ... | ${client_ip} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} - -| TC02: VPP proxy ignores invalid DHCPv4 request -| | [Documentation] | -| | ... | [Top] TG=DUT \ -| | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCPv4 proxy. -| | ... | [Ver] Make TG verify matching invalid DHCPv4 packets are dropped. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${True} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip} -| | ... | ${tg_to_dut_if2_mac} -| | When DHCP Proxy Config | ${dut_node} | ${dhcp_server_ip} -| | ... | ${dut_to_tg_if1_ip} -| | Then Send DHCP DISCOVER and check answer | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${discover_src_ip} | ${valid_discover_dst_ip} -| | And DHCP DISCOVER should fail | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${discover_src_ip} | ${invalid_discover_dst_ip} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot deleted file mode 100644 index da1988defe..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot +++ /dev/null @@ -1,158 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.ProxyArp -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *RFC1027 Proxy ARP test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with -| ... | single link between nodes. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with Proxy ARP -| ... | *[Ver] TG verification:* Test ARP Request packet is sent -| ... | from TG on link to DUT1; on receive TG verifies ARP reply packet -| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC1027. - -*** Variables *** -| ${tg_to_dut1_ip}= | 10.0.0.100 -| ${dut1_to_tg_ip}= | 10.0.0.1 -| ${prefix_length}= | 24 -| ${lo_ip4_addr}= | 192.168.1.2 -| ${hi_ip4_addr}= | 192.168.1.10 -| ${pass_test_ip}= | 192.168.1.5 -| ${pass_test_lo_ip}= | 192.168.1.2 -| ${pass_test_hi_ip}= | 192.168.1.10 -| ${fail_test_lo_ip}= | 192.168.1.1 -| ${fail_test_hi_ip}= | 192.168.1.11 - -*** Test Cases *** -| TC01: DUT sends ARP reply on behalf of another machine from the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is in range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_ip} - -| TC02: DUT sends ARP reply on behalf of another machine from beginning of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is from beginning of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_lo_ip} - -| TC03: DUT sends ARP reply on behalf of another machine from end of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is from end of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_hi_ip} - -| TC04: DUT does not send ARP reply on behalf of another machine from below of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 does not send ARP reply on behalf of machine which -| | ... | IP is from below of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} -| | ... | ${fail_test_lo_ip} - -| TC05: DUT does not send ARP reply on behalf of another machine from above of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 does not send ARP reply on behalf of machine which -| | ... | IP is from above of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} -| | ... | ${fail_test_hi_ip} diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot deleted file mode 100644 index 7a17c4cfd1..0000000000 --- a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot +++ /dev/null @@ -1,215 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/ip/map.robot -| ... -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SOFTWIRE -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Lightweight 4 over 6 test cases* -| ... -| ... | LW4o6 is a subset of MAP-E, with per-subscriber rules. It uses the -| ... | same tunneling mechanism and configuration as MAP-E. It does not use -| ... | embedded address bits. -| ... -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links -| ... | between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG_if1-DUT, -| ... | Eth-IPv6-IPv4-UDP on TG_if2_DUT. -| ... | *[Cfg] DUT configuration:* DUT1 is configured as lwAFTR. -| ... | *[Ver] TG verification:* Test UDP ICMP Echo Request in IPv4 are -| ... | sent to lwAFTR and are verified by TG for correctness their -| ... | encapsulation in IPv6 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7596 RFC7597. - -*** Variables *** -| ${dut_ip4}= | 10.0.0.1 -| ${dut_ip6}= | 2001:0::1 -| ${tg_ip6}= | 2001:0::2 -| ${ipv4_prefix_len}= | 24 -| ${ipv6_prefix_len}= | 64 - -| ${lw_ipv4_pfx}= | 20.0.0.1/32 -| ${lw_ipv6_pfx}= | 2001:1::/64 -| ${lw_ipv6_src}= | 2001:1::1 -| ${lw_psid_length}= | ${8} -| ${lw_psid_offset}= | ${6} -| ${lw_rule_psid}= | ${52} -| ${lw_rule_ipv6_dst}= | 2001:1::2 -| ${lw_rule_2_psid}= | ${22} -| ${lw_rule_2_ipv6_dst}= | 2001:1::3 -| ${test_ipv4_inside}= | 20.0.0.1 -| ${test_ipv4_outside}= | 10.0.0.100 -# test_port depends on psid, length, offset -| ${test_port}= | ${1232} -| ${test_icmp_id}= | ${1232} -| ${test_2_port}= | ${6232} - -*** Test Cases *** -| TC01: Encapsulate IPv4 into IPv6. IPv6 dst depends on IPv4 and UDP destination -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Enc] Eth-IPv4-UDP on TG_if1-DUT, Eth-IPv6-IPv4-UDP on TG_if2_DUT. -| | ... | [Cfg] On DUT1 configure Map domain and Map rule. -| | ... | [Ver] Make TG send non-encapsulated UDP to DUT; verify TG received -| | ... | IPv4oIPv6 encapsulated packet is correct. -| | ... | [Ref] RFC7596 RFC7597 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6} -| | ... | ${tg_to_dut_if2_mac} -| | And Vpp Route Add -| | ... | ${dut_node} | ${lw_rule_ipv6_dst} | 128 -| | ... | gateway=${tg_ip6} | interface=${dut_to_tg_if2} -| | ${domain_index}= -| | ... | When Map Add Domain -| | ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx} -| | ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset} -| | ... | ${lw_psid_length} -| | And Map Add Rule -| | ... | ${dut_node} | ${domain_index} | ${lw_rule_psid} -| | ... | ${lw_rule_ipv6_dst} -| | Then Send IPv4 UDP and check headers for lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_mac} | ${test_ipv4_inside} | ${test_ipv4_outside} -| | ... | ${test_port} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${lw_rule_ipv6_dst} | ${lw_ipv6_src} - -TC02: Encapsulate IPv4 ICMP into IPv6. IPv6 dst depends on IPv4 addr and ICMP ID -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Enc] Eth-IPv4-ICMP(type 0 and 8) on TG_if1-DUT, Eth-IPv6-IPv4-ICMP -| | ... | on TG_if2_DUT. -| | ... | [Cfg] On DUT1 configure Map domain and Map rule. -| | ... | [Ver] Make TG send non-encapsulated ICMP to DUT; verify TG received -| | ... | IPv4oIPv6 encapsulated packet is correct. Checks IPv6 -| | ... | destination based on ICMP Identifier field. -| | ... | [Ref] RFC7596 section 8.1 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6} -| | ... | ${tg_to_dut_if2_mac} -| | And Vpp Route Add -| | ... | ${dut_node} | ${lw_rule_ipv6_dst} | 128 -| | ... | gateway=${tg_ip6} | interface=${dut_to_tg_if2} -| | ${domain_index}= -| | ... | When Map Add Domain -| | ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx} -| | ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset} -| | ... | ${lw_psid_length} -| | And Map Add Rule -| | ... | ${dut_node} | ${domain_index} | ${lw_rule_psid} -| | ... | ${lw_rule_ipv6_dst} -| | Then Send IPv4 ICMP and check headers for lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_mac} | ${test_ipv4_inside} | ${test_ipv4_outside} -| | ... | ${test_icmp_id} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${lw_rule_ipv6_dst} | ${lw_ipv6_src} - -TC03: Decapsulate IPv4 UDP from IPv6. -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Enc] Eth-IPv6-IPv4-UDP on TG_if2_DUT, Eth-IPv4-UDP on TG_if1-DUT. -| | ... | [Cfg] On DUT1 configure Map domain and Map rule. -| | ... | [Ver] Make TG send encapsulated UDP to DUT; verify TG received -| | ... | IPv4 non-encapsulated packet is correct. -| | ... | [Ref] RFC7596 RFC7597 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${test_ipv4_outside} -| | ... | ${tg_to_dut_if1_mac} -| | ${domain_index}= -| | ... | When Map Add Domain -| | ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx} -| | ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset} -| | ... | ${lw_psid_length} -| | And Map Add Rule -| | ... | ${dut_node} | ${domain_index} | ${lw_rule_psid} -| | ... | ${lw_rule_ipv6_dst} -| | Then Send IPv4 UDP in IPv6 and check headers for lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${lw_ipv6_src} | ${lw_rule_ipv6_dst} -| | ... | ${test_ipv4_outside} | ${test_ipv4_inside} | ${test_port} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} - -TC04: Hairpinning of traffic between two lwB4 -| | [Documentation] -| | ... | [Top] DUT1-TG. -| | ... | [Enc] Eth-IPv6-IPv4-UDP on TG_if2_DUT, Eth-IPv6-IPv4-UDP on TG_if2_DUT. -| | ... | [Cfg] On DUT1 configure Map domain and two Map rules. -| | ... | [Ver] Make TG send encapsulated UDP to DUT; verify TG received -| | ... | encapsulated packet is correct. -| | ... | [Ref] RFC7596 RFC7597 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_ip6} -| | ... | ${tg_to_dut_if2_mac} -| | And Vpp Route Add -| | ... | ${dut_node} | ${lw_rule_2_ipv6_dst} | 128 -| | ... | gateway=${tg_ip6} | interface=${dut_to_tg_if2} -| | ${domain_index}= -| | ... | When Map Add Domain -| | ... | ${dut_node} | ${lw_ipv4_pfx} | ${lw_ipv6_pfx} -| | ... | ${lw_ipv6_src} | 0 | ${lw_psid_offset} -| | ... | ${lw_psid_length} -| | And Map Add Rule -| | ... | ${dut_node} | ${domain_index} | ${lw_rule_psid} -| | ... | ${lw_rule_ipv6_dst} -| | And Map Add Rule -| | ... | ${dut_node} | ${domain_index} | ${lw_rule_2_psid} -| | ... | ${lw_rule_2_ipv6_dst} -| | Then Send IPv4 UDP in IPv6 and check headers for lightweight hairpinning -| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if2_mac} -| | ... | ${lw_ipv6_src} | ${lw_rule_ipv6_dst} -| | ... | ${test_ipv4_inside} | ${test_ipv4_inside} -| | ... | ${test_2_port} | ${test_port} -| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${lw_rule_2_ipv6_dst} | ${lw_ipv6_src} diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot deleted file mode 100644 index 47f88ff347..0000000000 --- a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot +++ /dev/null @@ -1,490 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/ip/map.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Variables | resources/test_data/softwire/map_e_domains.py | ${5} -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... | SOFTWIRE -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Test for Basic mapping rule for MAP-E*\ -| ... | *[Top] Network Topologies:* TG - DUT1 - TG with two links between the -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG-to-DUT-if1. -| ... | Eth-IPv6-IPv4-UDP on TG-to-DUT-if2. -| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4 on one DUT-to-TG -| ... | interface and IPv6 address on second DUT-to-TG interface. MAP-E domain -| ... | is configured in test template based on test parameters. -| ... | *[Ver] TG verification:* UDP packets in IPv4 are sent by TG to -| ... | destination in MAP domain. IPv6 packets with encapsulated IPv4 are -| ... | received on TG interface. -| ... | *[Ref] Applicable standard specifications:* RFC7597. - - -*** Variables *** -| ${dut_ip4}= | 10.0.0.1 -| ${dut_ip6}= | 2001:0::1 -| ${dut_ip4_gw}= | 10.0.0.2 -| ${dut_ip6_gw}= | 2001:0::2 -| ${ipv4_prefix_len}= | 24 -| ${ipv6_prefix_len}= | 64 -| ${ipv6_br_src}= | 2001:db8:ffff::1 -| ${ipv4_outside}= | 1.0.0.1 - - -*** Test Cases *** -| TC01: BMR, then an IPv4 prefix is assigned -| | [Documentation] -| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ -| | ... | IPv4 prefix length + ea bits length < 32 (o + r < 32) -| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32 -| | ... -| | ... | Arguments: -| | ... -| | ... | - ipv4_pfx -| | ... | - ipv6_pfx -| | ... | - ipv6_src -| | ... | - ea_bit_len -| | ... | - psid_offset -| | ... | - psid_len -| | ... | - ipv4_dst -| | ... | - dst_port -| | ... | - expected_ipv6_dst -| | ... -# TODO: replace setup when VPP-312 fixed -#| | [Setup] | Set Interfaces IP Addresses And Routes -| | [Setup] | Run Keywords -| | ... | Set up functional test | AND -| | ... | Set Interfaces IP Addresses And Routes -| | [Template] | Check MAP Configuration With Traffic Script -# |=================|===============|================|============|=============|==========|================|==========|==================================| -# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | -# |=================|===============|================|============|=============|==========|================|==========|==================================| -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a000::14a0:0:0 | -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a900::14a9:0:0 | -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c0::14a9:c000:0 | -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9::14a9:c900:0 | -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:d000:0:14a9:c9d0:0 | -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${23} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:da00:0:14a9:c9da:0 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:d000::14a9:c9d0:0 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${7} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:da00::14a9:c9da:0 | - - -| TC02: BMR, full IPv4 address is to be assigned -| | [Documentation] -| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ -| | ... | IPv4 prefix length + ea bits length == 32 (o + r == 32) -| | ... | psid_length = 0, ip6_prefix < 64, ip4_prefix <= 32 -| | ... -| | ... | Arguments: -| | ... -| | ... | - ipv4_pfx -| | ... | - ipv6_pfx -| | ... | - ipv6_src -| | ... | - ea_bit_len -| | ... | - psid_offset -| | ... | - psid_len -| | ... | - ipv4_dst -| | ... | - dst_port -| | ... | - expected_ipv6_dst -| | ... -# TODO: replace setup when VPP-312 fixed -#| | [Setup] | Set Interfaces IP Addresses And Routes -| | [Setup] | Run Keywords -| | ... | Set up functional test | AND -| | ... | Set Interfaces IP Addresses And Routes -| | [Template] | Check MAP Configuration With Traffic Script -# |===================|===============|================|============|=============|==========|================|==========|==================================| -# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | -# |===================|===============|================|============|=============|==========|================|==========|==================================| -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${24} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:db00:0:14a9:c9db:0 | -| | 20.160.0.0/12 | 2001:db8::/32 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:9c9d:b000:0:14a9:c9db:0 | -| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:c9db::14a9:c9db:0 | -| | 20.169.200.0/22 | 2001:db8::/32 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:76c0::14a9:c9db:0 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:db00::14a9:c9db:0 | -| | 20.169.201.208/28 | 2001:db8::/32 | ${ipv6_br_src} | ${4} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:b000::14a9:c9db:0 | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8::14a9:c9db:0 | -| | 20.0.0.0/8 | 2001:db8::/40 | ${ipv6_br_src} | ${24} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:a9:c9db:0:14a9:c9db:0 | -| | 20.160.0.0/12 | 2001:db8::/44 | ${ipv6_br_src} | ${20} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:9:c9db:0:14a9:c9db:0 | -| | 20.169.0.0/16 | 2001:db8::/48 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:0:c9db:0:14a9:c9db:0 | -| | 20.169.200.0/22 | 2001:db8::/54 | ${ipv6_br_src} | ${10} | ${0} | ${0} | 20.169.201.219 | ${1232} | 2001:db8:0:1db:0:14a9:c9db:0 | - - -| TC03: BMR, shared IPv4 address is to be assigned -| | [Documentation] -| | ... | Basic Mapping Rule https://tools.ietf.org/html/rfc7597#section-5.2\ -| | ... | IPv4 prefix length + ea bits length > 32 (o + r > 32) -| | ... | ip6_prefix < 64, ip4_prefix <= 32 -| | ... -| | ... | Arguments: -| | ... -| | ... | - ipv4_pfx -| | ... | - ipv6_pfx -| | ... | - ipv6_src -| | ... | - ea_bit_len -| | ... | - psid_offset -| | ... | - psid_len -| | ... | - ipv4_dst -| | ... | - dst_port -| | ... | - expected_ipv6_dst -| | ... -# TODO: replace setup when VPP-312 fixed -#| | [Setup] | Set Interfaces IP Addresses And Routes -| | [Setup] | Run Keywords -| | ... | Set up functional test | AND -| | ... | Set Interfaces IP Addresses And Routes -| | [Template] | Check MAP Configuration With Traffic Script -# |===================|===============|================|============|=============|==========|================|==========|===================================| -# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | expected_ipv6_dst | -# |===================|===============|================|============|=============|==========|================|==========|===================================| -| | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 | -| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | -| | 20.169.201.0/24 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db34::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:3400::14a9:c9db:34 | - -| | 20.0.0.0/8 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:a9:c9db:3400:0:14a9:c9db:34 | -| | 20.169.0.0/16 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9:db34::14a9:c9db:34 | -| | 20.169.201.0/24 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db:3400::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:34::14a9:c9db:34 | -| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:3400::14a9:c9db:34 | - -| | 20.0.0.0/8 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:a9c9:db34:0:14a9:c9db:34 | -| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:c9db:3400:0:14a9:c9db:34 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | -| | 20.169.0.0/16 | 2001::/24 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9:db34::14a9:c9db:34 | -| | 20.169.201.0/24 | 2001::/24 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db:3400::14a9:c9db:34 | -| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:c9db:3400::14a9:c9db:34 | -| | 20.169.201.0/24 | 2001::/16 | ${ipv6_br_src} | ${32} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db34::14a9:c9db:34 | - -| | 20.160.0.0/12 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${5} | 20.169.201.219 | ${1232} | 2001:db8:9c9d:b300:0:14a9:c9db:6 | -| | 20.169.0.0/16 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:c9db:3400:0:14a9:c9db:34 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${25} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | - -| | 20.169.192.0/20 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${5} | 20.169.201.219 | ${1232} | 2001:db8:9db3::14a9:c9db:6 | -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:db34::14a9:c9db:34 | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${17} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | - -| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${12} | ${6} | ${4} | 20.169.201.219 | ${1232} | 2001:db8:db30::14a9:c9db:3 | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${12} | ${6} | ${8} | 20.169.201.219 | ${1232} | 2001:db8:3400::14a9:c9db:34 | - - -| TC04: End user IPv6 prefix is 64 -| | [Documentation] -| | ... | Supported End-User IPv6 prefix length is 64 bit. -| | ... -| | ... | Arguments: -| | ... -| | ... | - ipv4_pfx -| | ... | - ipv6_pfx -| | ... | - ipv6_src -| | ... | - ea_bit_len -| | ... | - psid_offset -| | ... | - psid_len -| | ... | - ipv4_dst -| | ... | - dst_port -| | ... -# TODO: replace setup when VPP-312 fixed -#| | [Setup] | Set Interfaces IP Addresses And Routes -| | [Setup] | Run Keywords -| | ... | Set up functional test | AND -| | ... | Set Interfaces IP Addresses And Routes -| | [Template] | Check MAP Configuration With Traffic Script -# |===================|=========================|================|============|=============|==========|================|==========| -# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | -# |===================|=========================|================|============|=============|==========|================|==========| -| | 20.0.0.0/8 | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | -| | 20.169.201.208/28 | 2001:db8:0012:3400::/56 | ${ipv6_br_src} | ${8} | ${5} | ${4} | 20.169.201.219 | ${3280} | -| | 20.0.0.0/8 | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | -| | 20.169.201.219/32 | 2001:db8:0012:3400::/64 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 20.169.201.219 | ${1232} | - - -| TC05: IPv4 prefix is 0 -| | [Tags] | EXPECTED_FAILING -# TODO: replace setup when VPP-312 fixed -#| | [Setup] | Set Interfaces IP Addresses And Routes -| | [Setup] | Run Keywords -| | ... | Set up functional test | AND -| | ... | Set Interfaces IP Addresses And Routes -| | [Template] | Check MAP Configuration With Traffic Script -# |===================|=========================|================|============|=============|==========|================|==========| -# | ipv4_pfx | ipv6_pfx | ipv6_src | ea_bit_len | psid_offset | psid_len | ipv4_dst | dst_port | -# |===================|=========================|================|============|=============|==========|================|==========| -| | 0.0.0.0/0 | 2001:db8:0000::/40 | ${ipv6_br_src} | ${8} | ${0} | ${0} | 20.169.201.219 | ${1232} | -| | 0.0.0.0/0 | 2001:db8:0000::/40 | ${ipv6_br_src} | ${16} | ${0} | ${0} | 20.169.201.219 | ${1232} | -| | 0.0.0.0/0 | 2001:db8::/32 | ${ipv6_br_src} | ${32} | ${0} | ${0} | 20.169.201.219 | ${1232} | -| | 0.0.0.0/0 | 2001:d00::/24 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | -| | 0.0.0.0/0 | 2001::/16 | ${ipv6_br_src} | ${40} | ${6} | ${8} | 20.169.201.219 | ${1232} | - - -| TC06: Multiple domain and check with traffic script IPv4 source IPv6 destination -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ -| | ... | file. -| | ... | [Ver] Send IPv4 to destination in configured domain and receive IPv6\ -| | ... | packet. -| | ... | [Ref] RFC7597. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} -| | :FOR | ${domain_set} | IN | @{domain_sets} -| | | When Map Add Domain | ${dut_node} | @{domain_set} -| | :FOR | ${ip_set} | IN | @{ip_sets} -| | | ${ipv4}= | Get From List | ${ip_set} | 0 -| | | ${ipv6}= | Get From List | ${ip_set} | 1 -| | | ${port}= | Get From List | ${ip_set} | 2 -| | | ${ipv6_br}= | Get From List | ${ip_set} | 3 -| | | Then Send IPv4 UDP And Check Headers For Lightweight 4over6 -| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | | ... | ${dut_to_tg_if1_mac} | ${ipv4} | ${ipv4_outside} | ${port} -| | | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${ipv6} | ${ipv6_br} -| | | And Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6 -| | | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} -| | | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} | ${ipv6_br} | ${ipv6} -| | | ... | ${ipv4_outside} | ${ipv4} | ${port} | ${tg_to_dut_if1_mac} -| | | ... | ${dut_to_tg_if1_mac} - - -| TC07: Multiple domain and check with traffic script IPv6 source IPv6 destination -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ -| | ... | file. -| | ... | [Ver] Send IPv4 encapsulated in IPv6. Source and destination are from\ -| | ... | configured domains. Check if VPP translate IPv6 addresses. -| | ... | [Ref] RFC7597. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} -| | :FOR | ${domain_set} | IN | @{domain_sets} -| | | When Map Add Domain | ${dut_node} | @{domain_set} -| | ${ip_set_A}= | Get From List | ${ip_sets} | 0 -| | ${ip_set_B}= | Get From List | ${ip_sets} | 1 -| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3 -| | ${port_A}= | Get From List | ${ip_set_A} | 2 -| | ${port_B}= | Get From List | ${ip_set_B} | 2 -| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1 -| | ${ipv6_B}= | Get From List | ${ip_set_B} | 1 -| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0 -| | ${ipv4_B}= | Get From List | ${ip_set_B} | 0 -| | Then Send IPv4 UDP In IPv6 And Check Headers For Lightweight Hairpinning -| | ... | ${tg_node} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} -| | ... | ${ipv6_br} | ${ipv6_A} -| | ... | ${ipv4_B} | ${ipv4_A} -| | ... | ${port_B} | ${port_A} -| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${ipv6_B} | ${ipv6_br} - - -| TC08: Encapsulate IPv4 ICMP into IPv6 -| | [Documentation] -| | ... | [Top] TG=DUT1. -| | ... | [Enc] Eth-IPv4-ICMP(type 0 and 8) on TG_if1-DUT, Eth-IPv6-IPv4-ICMP\ -| | ... | on TG_if2_DUT. -| | ... | [Cfg] Multiple MAP-E domains are configured, values from variable\ -| | ... | file. -| | ... | [Ver] Make TG send non-encapsulated ICMP to DUT; verify TG received\ -| | ... | IPv4oIPv6 encapsulated packet is correct. Checks IPv6 destination\ -| | ... | based on ICMP Identifier field. -| | ... | [Ref] RFC7597 section 8.2. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} -| | :FOR | ${domain_set} | IN | @{domain_sets} -| | | When Map Add Domain | ${dut_node} | @{domain_set} -| | ${ip_set_A}= | Get From List | ${ip_sets} | 0 -| | ${ipv4_A}= | Get From List | ${ip_set_A} | 0 -| | ${ipv6_A}= | Get From List | ${ip_set_A} | 1 -| | ${icmp_id_A}= | Get From List | ${ip_set_A} | 2 -| | ${ipv6_br}= | Get From List | ${ip_set_A} | 3 -| | Then Send IPv4 ICMP And Check Headers For Lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_mac} | ${ipv4_A} | ${ipv4_outside} -| | ... | ${icmp_id_A} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${ipv6_A} | ${ipv6_br} - - -| TC09: Repeated ip neighbor command doesnt put FIB to broken state -| | [Documentation] | -| | ... | Original issue described in https://jira.fd.io/browse/VPP-312. -| | ... | [Top] TG=DUT1. -| | ... | [Cfg] IP address are set on interfaces, ip neighbor multiple times -| | ... | [Ver] FIB is not in broken state. The steps are add route, \ -| | ... | check with traffic then add same route -| | ... | again and check with traffic script. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} -| | Then Check MAP Configuration With Traffic Script -| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} -| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 -| | When Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | And Vpp Route Add | ${dut_node} | 2001:: | 16 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | And Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} -| | Then Check MAP Configuration With Traffic Script -| | ... | 20.0.0.0/8 | 2001::/16 | ${ipv6_br_src} | ${48} | ${6} | ${8} -| | ... | 20.169.201.219 | ${1232} | 2001:a9c9:db34::14a9:c9db:34 - - -| Bug: VPP-318 -| | [Tags] | EXPECTED_FAILING -| | [Documentation] | qlen < psid length -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | Then Run Keyword And Expect Error | Unable to add map domain * -| | ... | Map Add Domain | ${dut_node} | 20.169.0.0/16 | 2001:db8::/32 -| | ... | ${ipv6_br_src} | ${20} | ${6} | ${8} - - -*** Keywords *** -| Set Interfaces IP Addresses And Routes -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Set interfaces in 2-node circular topology up -| | Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | Vpp Route Add | ${dut_node} | ${ipv4_outside} | 32 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} - -| Check MAP Configuration With Traffic Script -| | [Documentation] -| | ... | Used as a test case template.\ -| | ... | Configure MAP-E domain with given parameters, with traffic script send -| | ... | UDP in IPv4 packet to given UDP destination port and IP destination -| | ... | address and check if correctly received IPv6 packet. Vice versa send -| | ... | IPv6 packet and check if received IPv4 packet with correct source -| | ... | address. -| | ... | The MAP domain is deleted in teardown. -| | ... | The expected IPv6 address is compared with computed IPv6 address. -| | [Arguments] | ${ipv4_pfx} | ${ipv6_pfx} | ${ipv6_br_src} | ${ea_bit_len} -| | ... | ${psid_offset} | ${psid_len} | ${ipv4_dst} | ${dst_port} -| | ... | ${expected_ipv6_dst}=${EMPTY} -| | ${domain_index}= | Map Add Domain | ${dut_node} | ${ipv4_pfx} | ${ipv6_pfx} -| | ... | ${ipv6_br_src} | ${ea_bit_len} | ${psid_offset} | ${psid_len} -| | ${computed_ipv6_dst}= | Compute IPv6 Map Destination Address -| | ... | ${ipv4_pfx} | ${ipv6_pfx} | ${ea_bit_len} | ${psid_offset} -| | ... | ${psid_len} | ${ipv4_dst} | ${dst_port} -| | ${ipv6_dst}= | Run Keyword If | "${expected_ipv6_dst}" == "${EMPTY}" -| | ... | Set Variable | ${computed_ipv6_dst} -| | ... | ELSE | Set Variable | ${expected_ipv6_dst} -| | Run Keyword If | "${expected_ipv6_dst}" != "${EMPTY}" -| | ... | IP Addresses Should Be Equal -| | ... | ${computed_ipv6_dst} | ${expected_ipv6_dst} -| | ${ipv6_dst}= | Set Variable | ${computed_ipv6_dst} -| | Check Encapsulation With Traffic Script -| | ... | ${ipv4_dst} | ${dst_port} | ${ipv6_dst} -| | Check Decapsulation With Traffic Script -| | ... | ${ipv6_dst} | ${ipv4_dst} | ${dst_port} -| | [Teardown] | Run Keywords -| | ... | Map Del Domain | ${dut_node} | ${domain_index} | AND -| | ... | Show Packet Trace On All DUTs | ${nodes} | AND -| | ... | Clear Packet Trace On All DUTs | ${nodes} | AND -| | ... | Verify VPP PID in Teardown - -| Check Encapsulation With Traffic Script -| | [Arguments] | ${ipv4_dst} | ${dst_port} | ${ipv6_dst} -| | Send IPv4 UDP And Check Headers For Lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_mac} | ${ipv4_dst} | ${ipv4_outside} -| | ... | ${dst_port} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${ipv6_dst} | ${ipv6_br_src} - -| Check Decapsulation With Traffic Script -| | [Arguments] | ${ipv6_ce_addr} | ${ipv4_inside} | ${port} -| | Send IPv4 UDP In IPv6 And Check Headers For Lightweight 4over6 -| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${ipv6_br_src} | ${ipv6_ce_addr} -| | ... | ${ipv4_outside} | ${ipv4_inside} | ${port} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} diff --git a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot b/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot deleted file mode 100644 index a9c32a90bf..0000000000 --- a/tests/vpp/func/ip4_tunnels/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/ip/map.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SOFTWIRE -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Set interfaces IP addresses and routes -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Test for Basic mapping rule for MAP-T*\ -| ... | *[Top] Network Topologies:* TG - DUT1 - TG with two links between the -| ... | nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP on TG-to-DUT-if1. -| ... | Eth-IPv6-UDP on TG-to-DUT-if2. -| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4 on one DUT-to-TG -| ... | interface and IPv6 address on second DUT-to-TG interface. MAP-T domain -| ... | is configured in test template based on test parameters. -| ... | *[Ver] TG verification:* UDP packets in IPv4 are sent by TG to -| ... | destination in MAP domain. IPv6 packets with translated IPv4 addresses -| ... | are received on TG interface. -| ... | *[Ref] Applicable standard specifications:* RFC7599 - - -*** Variables *** -| ${dut_ip4}= | 10.0.0.1 -| ${dut_ip6}= | 2001:0::1 -| ${dut_ip4_gw}= | 10.0.0.2 -| ${dut_ip6_gw}= | 2001:0::2 -| ${ipv4_prefix_len}= | 24 -| ${ipv6_prefix_len}= | 64 -| ${ipv6_br_src}= | 2001:db8:ffff::/96 - - -*** Test Cases *** -| TC01: MAP-T test -| | [Documentation] | -| | ... | Test to check map-t address translation. -| | ... -| | ... | Arguments: -| | ... -| | ... | - ipv4_pfx -| | ... | - ipv6_dst_pfx -| | ... | - ipv6_src_pfx -| | ... | - ea_bit_len -| | ... | - psid_offset -| | ... | - psid_len -| | ... | - ipv4_src -| | ... | - ipv4_dst -| | ... | - dst_port -| | ... -| | [Template] | Check MAP-T configuration with traffic script -# |===================|===============|================|============|=============|==========|===========|================|==========| -# | ipv4_pfx | ipv6_dst_pfx | ipv6_src_pfx | ea_bit_len | psid_offset | psid_len | ipv4_src | ipv4_dst | dst_port | -# |===================|===============|================|============|=============|==========|===========|================|==========| -| | 20.169.0.0/16 | 2001::/16 | ${ipv6_br_src} | ${40} | ${0} | ${0} | 100.0.0.1 | 20.169.201.219 | ${1232} | -| | 20.169.201.219/32 | 2001:db8::/32 | ${ipv6_br_src} | ${0} | ${0} | ${0} | 100.0.0.1 | 20.169.201.219 | ${1232} | -| | 20.0.0.0/8 | 2001:db8::/40 | ${ipv6_br_src} | ${24} | ${0} | ${0} | 100.0.0.1 | 20.169.201.219 | ${1232} | -#| | 20.169.201.0/32 | 2001:db8::/32 | ${ipv6_br_src} | ${0} | ${6} | ${8} | 100.0.0.1 | 20.169.201.219 | ${1232} | -#| | 20.169.201.0/24 | 2001:db8::/32 | ${ipv6_br_src} | ${0} | ${6} | ${8} | 100.0.0.1 | 20.169.201.219 | ${1232} | - - -*** Keywords *** -| Set interfaces IP addresses and routes -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Set interfaces in 2-node circular topology up -| | Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4} | ${ipv4_prefix_len} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6} | ${ipv6_prefix_len} -| | Vpp Route Add | ${dut_node} | :: | 0 | gateway=${dut_ip6_gw} -| | ... | interface=${dut_to_tg_if2} -| | VPP Add IP neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dut_ip6_gw} | ${tg_to_dut_if2_mac} -| | Vpp Route Add | ${dut_node} | 0.0.0.0 | 0 | gateway=${dut_ip4_gw} -| | ... | interface=${dut_to_tg_if1} -| | VPP Add IP neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip4_gw} | ${tg_to_dut_if1_mac} - -| Check MAP-T configuration with traffic script -| | [Documentation] | -| | ... | Used as a test case template.\ -| | ... | Configure MAP-T domain with given parameters, with traffic script send -| | ... | UDP in IPv4 packet to given UDP destination port and IP destination -| | ... | address and check if correctly received IPv6 packet with translated -| | ... | source and destination addresses. Vice versa send IPv6 packet and -| | ... | check if received IPv4 packet with correct source and destination -| | ... | addresses. -| | ... | The MAP domain is deleted in teardown. -| | [Arguments] | ${ipv4_pfx} | ${ipv6_dst_pfx} | ${ipv6_src_pfx} -| | ... | ${ea_bit_len} | ${psid_offset} | ${psid_len} -| | ... | ${ipv4_outside} | ${ipv4_inside} | ${dst_port} -| | ${domain_index}= | Map Add Domain | ${dut_node} | ${ipv4_pfx} -| | ... | ${ipv6_dst_pfx} | ${ipv6_src_pfx} | ${ea_bit_len} | ${psid_offset} -| | ... | ${psid_len} | ${TRUE} -| | ${ipv6_ce_addr}= | Compute IPv6 map destination address -| | ... | ${ipv4_pfx} | ${ipv6_dst_pfx} | ${ea_bit_len} | ${psid_offset} -| | ... | ${psid_len} | ${ipv4_inside} | ${dst_port} -| | ${ipv6_br_addr}= | Compute IPv6 map source address -| | ... | ${ipv6_src_pfx} | ${ipv4_outside} -# Check translation from v4 to v6 with traffic script -| | Send IPv4 UDP and check IPv6 headers for MAP-T -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_mac} | ${ipv4_inside} | ${ipv4_outside} | ${dst_port} -| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${ipv6_ce_addr} | ${ipv6_br_addr} -# Check translation from v6 to v4 with traffic script -| | Send IPv6 UDP and check IPv4 headers for MAP-T -| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} -| | ... | ${ipv6_br_addr} | ${ipv6_ce_addr} -| | ... | ${dst_port} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${ipv4_outside} | ${ipv4_inside} -| | [Teardown] | Run Keywords -| | ... | Map Del Domain | ${dut_node} | ${domain_index} | AND -| | ... | Show packet trace on all DUTs | ${nodes} | AND -| | ... | Clear packet trace on all DUTs | ${nodes} | AND -| | ... | Verify VPP PID in Teardown diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot deleted file mode 100644 index 7611cbcbd4..0000000000 --- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/features/dhcp_proxy.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *DHCPv6 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG = DUT -| ... | with two links between the nodes. -| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv6 proxy. -| ... | *[Ver] TG verification:* Test DHCPv6 packets are sent -| ... | on TG on first link to DUT and received on TG on second link. -| ... | On receive TG verifies if DHCPv6 packets are valid -| ... | *[Ref] Applicable standard specifications:* RFC 3315 - - -*** Variables *** -| ${dut_to_tg_if1_ip}= | 3ffe:62::1 -| ${dut_to_tg_if2_ip}= | 3ffe:63::1 -| ${dhcp_server_ip}= | 3ffe:63::2 -| ${prefix_length}= | 64 - - -*** Test Cases *** -| TC01: VPP proxies valid DHCPv6 request to DHCPv6 server -| | [Documentation] | -| | ... | [Top] TG=DUT -| | ... | [Cfg] On DUT setup DHCP proxy. -| | ... | [Ver] Make TG verify matching DHCPv6 packets between client and \ -| | ... | DHCPv6 server through DHCPv6 proxy. -| | ... | [Ref] RFC 3315 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | local=${TRUE} -| | And VPP Add IP Neighbor | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dhcp_server_ip} | ${tg_to_dut_if2_mac} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | When DHCP Proxy Config -| | ... | ${dut_node} | ${dhcp_server_ip} | ${dut_to_tg_if1_ip} -| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip} -| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if2_mac} -- cgit 1.2.3-korg