From 61ef529d33efd51acd1b1986c325d25a9d7ba705 Mon Sep 17 00:00:00 2001 From: Vratko Polak Date: Mon, 9 Jul 2018 15:14:36 +0200 Subject: Remove THIS tag and use unix endlines The THIS tag has sneaked in 10Ge2P1X520-Eth-L2Xcbase-Eth-1Memif-1Dcr-Mrr but usually it is only to be used in draft testing. Not sure about the way non-unix endlines crept in. Is not git supposed to perform endline conversions on text files? Or are .robot, .rst, .yaml and .vat not recognized as text? Change-Id: Ia78cf942c05c3029c340a8639782786f37e57469 Signed-off-by: Vratko Polak --- ...e2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot | 440 ++++++------- ...0-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot | 722 ++++++++++----------- ...e2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot | 438 ++++++------- ...0-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot | 720 ++++++++++---------- 4 files changed, 1160 insertions(+), 1160 deletions(-) (limited to 'tests/vpp/perf/container_memif') diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index d0c70f0c6d..d9dcce584e 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -1,220 +1,220 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF -| ... | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Check RR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Check RR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ... -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Traffic should pass with maximum rate | ${perf_trial_duration} -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 1C | THIS -| | framesize=${64} | wt=1 | rxq=1 - -| tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 1C -| | framesize=${1518} | wt=1 | rxq=1 - -| tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 1C -| | framesize=${9000} | wt=1 | rxq=1 - -| tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 - -| tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 2C -| | framesize=${64} | wt=2 | rxq=1 - -| tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 2C -| | framesize=${1518} | wt=2 | rxq=1 - -| tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 2C -| | framesize=${9000} | wt=2 | rxq=1 - -| tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 - -| tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 4C -| | framesize=${64} | wt=4 | rxq=2 - -| tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 4C -| | framesize=${1518} | wt=4 | rxq=2 - -| tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 4C -| | framesize=${9000} | wt=4 | rxq=2 - -| tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF +| ... | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Check RR for l2xcbase-eth-1memif-1dcr +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# Container settings +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${TRUE} +| ${container_chain_topology}= | cross_horiz +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for l2xcbase-eth-1memif-1dcr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add single PCI device to all DUTs +| | And Run Keyword If | ${get_framesize} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | ... | ${rxq} +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 1C +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1C +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1C +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 2C +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2C +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2C +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 4C +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4C +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4C +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index 6fab3c9397..91350e434f 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -1,361 +1,361 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF -| ... | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Find NDRPDR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate, step 50kpps. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} -| | ... | ${min_rate}=${50000} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR - -| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR - -| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR - -| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR - -| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR - -| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR - -| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR - -| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR - -| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR - -| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR - -| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR - -| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR - -| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR - -| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC -| | framesize=${1518} | wt=4 | rxq=2| search_type=NDR - -| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR - -| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR - -| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR - -| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C | NDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR - -| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C | PDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF +| ... | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# Container settings +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${TRUE} +| ${container_chain_topology}= | cross_horiz +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Find NDRPDR for l2xcbase-eth-1memif-1dcr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ +| | ... | start at 10GE linerate, step 50kpps. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} +| | ... | ${min_rate}=${50000} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add single PCI device to all DUTs +| | And Run Keyword If | ${get_framesize} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | ... | ${rxq} +| | Then Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 1C | NDRDISC +| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR + +| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR + +| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 1C | NDRDISC +| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR + +| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 1C | PDRDISC +| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR + +| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 1C | NDRDISC +| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR + +| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 1C | PDRDISC +| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR + +| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C | NDRDISC +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR + +| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C | PDRDISC +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR + +| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 2C | NDRDISC +| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR + +| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR + +| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 2C | NDRDISC +| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR + +| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 2C | PDRDISC +| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR + +| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 2C | NDRDISC +| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR + +| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 2C | PDRDISC +| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR + +| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C | NDRDISC +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR + +| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C | PDRDISC +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR + +| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 4C | NDRDISC +| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR + +| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 4C | PDRDISC +| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR + +| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 4C | NDRDISC +| | framesize=${1518} | wt=4 | rxq=2| search_type=NDR + +| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 4C | PDRDISC +| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR + +| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 4C | NDRDISC +| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR + +| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 4C | PDRDISC +| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR + +| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C | NDRDISC +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR + +| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C | PDRDISC +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index 044d05a45d..eee6a039da 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -1,219 +1,219 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X710 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Check RR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -# X710-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Check RR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ... -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Traffic should pass with maximum rate | ${perf_trial_duration} -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 1C -| | framesize=${64} | wt=1 | rxq=1 - -| tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 1C -| | framesize=${1518} | wt=1 | rxq=1 - -| tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 1C -| | framesize=${9000} | wt=1 | rxq=1 - -| tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 - -| tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 2C -| | framesize=${64} | wt=2 | rxq=1 - -| tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 2C -| | framesize=${1518} | wt=2 | rxq=1 - -| tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 2C -| | framesize=${9000} | wt=2 | rxq=1 - -| tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 - -| tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 4C -| | framesize=${64} | wt=4 | rxq=2 - -| tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 4C -| | framesize=${1518} | wt=4 | rxq=2 - -| tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 4C -| | framesize=${9000} | wt=4 | rxq=2 - -| tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Check RR for l2xcbase-eth-1memif-1dcr +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# Container settings +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${TRUE} +| ${container_chain_topology}= | cross_horiz +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for l2xcbase-eth-1memif-1dcr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add single PCI device to all DUTs +| | And Run Keyword If | ${get_framesize} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | ... | ${rxq} +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 1C +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1C +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1C +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 2C +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2C +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2C +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 64B | 4C +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4C +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4C +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index 37c8fd8664..386260c4cd 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -1,360 +1,360 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X710 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr -| ... -| Documentation | *Raw results L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | Container is connected to VPP via Memif interface running same VPP -| ... | version as running on DUT. Resources are limited via cgroup to use 5 -| ... | cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) -| ... | to Container, then via horizontal memif to the next Container, and so on -| ... | until the last Container then to NIC (in last Container). Single -| ... | Container is supported as of now. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# Container settings -| ${container_count}= | ${1} -| ${container_engine}= | Docker -| ${container_image}= | ubuntu:xenial-20180412 -| ${container_install_dkms}= | ${TRUE} -| ${container_chain_topology}= | cross_horiz -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| Find NDRPDR for l2xcbase-eth-1memif-1dcr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate, step 50kpps. -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} -| | ... | ${min_rate}=${50000} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add single PCI device to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} -| | Then Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR - -| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR - -| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR - -| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR - -| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR - -| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR - -| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR - -| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR - -| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR - -| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR - -| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR - -| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR - -| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR - -| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=NDR - -| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR - -| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR - -| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR - -| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C | NDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR - -| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 4C | PDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface running same VPP +| ... | version as running on DUT. Resources are limited via cgroup to use 5 +| ... | cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP) +| ... | to Container, then via horizontal memif to the next Container, and so on +| ... | until the last Container then to NIC (in last Container). Single +| ... | Container is supported as of now. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# Container settings +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${TRUE} +| ${container_chain_topology}= | cross_horiz +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Find NDRPDR for l2xcbase-eth-1memif-1dcr +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ +| | ... | start at 10GE linerate, step 50kpps. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} +| | ... | ${min_rate}=${50000} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add single PCI device to all DUTs +| | And Run Keyword If | ${get_framesize} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | ... | ${rxq} +| | Then Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 1C | NDRDISC +| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR + +| tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR + +| tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 1C | NDRDISC +| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR + +| tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 1C | PDRDISC +| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR + +| tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 1C | NDRDISC +| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR + +| tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 1C | PDRDISC +| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR + +| tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C | NDRDISC +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR + +| tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1C | PDRDISC +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR + +| tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 2C | NDRDISC +| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR + +| tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1C | PDRDISC +| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR + +| tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 2C | NDRDISC +| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR + +| tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 2C | PDRDISC +| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR + +| tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 2C | NDRDISC +| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR + +| tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 2C | PDRDISC +| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR + +| tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C | NDRDISC +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR + +| tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2C | PDRDISC +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR + +| tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 64B | 4C | NDRDISC +| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR + +| tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 4C | PDRDISC +| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR + +| tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 1518B | 4C | NDRDISC +| | framesize=${1518} | wt=4 | rxq=2 | search_type=NDR + +| tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 4C | PDRDISC +| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR + +| tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... +| | [Tags] | 9000B | 4C | NDRDISC +| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR + +| tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 4C | PDRDISC +| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR + +| tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C | NDRDISC +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR + +| tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ +| | ... | 2 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 50kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 4C | PDRDISC +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR -- cgit 1.2.3-korg