From f08ff7a4289b969c64f19eaeaf02d2eff2a6523f Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 19 Apr 2019 06:40:44 +0000 Subject: NF density tests with dtc=0.5 and dtcr=2 Change-Id: Icff556142280ad0b6261e0a2bfb71672ee6b3807 Signed-off-by: Peter Mikus --- ...th-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...th-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot | 140 --------------------- ...h-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot | 140 --------------------- ...h-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot | 140 --------------------- ...h-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot | 140 --------------------- ...h-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...h-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...h-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...h-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot | 124 ------------------ ...-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot | 140 --------------------- ...-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot | 140 --------------------- 38 files changed, 5224 deletions(-) delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot delete mode 100644 tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot (limited to 'tests/vpp/perf/container_memif') diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 3707811c42..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 6 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-12memif-1chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 142e6ea5e4..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 6 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-12memif-6chain-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot deleted file mode 100644 index de3164cf50..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 12 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-12memif-6pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot deleted file mode 100644 index eea72f8cd5..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6 -| ... | pipelines 1 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-12memif-6pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index ac36c6c785..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 8 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-16memif-1chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index df280614c3..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 8 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-16memif-2chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index f916d9805a..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 8 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 486d217029..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 8 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-16memif-8chain-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 1020f16e41..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 16 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-8pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 9ca59242d0..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 16memif 8 -| ... | pipelines 8 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-16memif-8pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 7162606a7d..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 chains -| ... | 10 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-20memif-10chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 13e412b71d..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20memif 10 -| ... | pipelines 1 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-20memif-10pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 0fe7945ba5..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 10 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-20memif-1chain-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 080b3598e4..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 12 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-24memif-2chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 5daf1ad96e..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 6 chains -| ... | 12 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-24memif-6chain-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot deleted file mode 100644 index ecd89489ff..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 1 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1chain-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 5d0f00679f..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 10 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-10dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot deleted file mode 100644 index e53c612eb2..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 1 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-1dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 0173645c21..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 2 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 1addfb35fc..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 4 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot deleted file mode 100644 index cbab163675..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 6 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-6dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index c2ceadb701..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 1 -| ... | pipeline 8 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-2memif-1pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index dfcb0955d6..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 16 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-32memif-2chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index bc04e14394..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 16 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-32memif-4chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 382ecc33f1..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 8 chains -| ... | 16 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-32memif-8chain-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 57f68305f3..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 2 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-1chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 48e761aae7..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 2 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-2chain-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 73fd9ec345..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 12 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-12dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index b3952b431d..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 16 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 542641b40f..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 2 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-2dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 2751869d82..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 2memif 2 -| ... | pipelines 4 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 7acea9f09a..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4memif 2 -| ... | pipelines 8 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-4memif-2pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 9bfd03487d..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain -| ... | 4 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-8memif-1chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index f8dbac7762..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains -| ... | 4 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-8memif-2chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 1109713681..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C -| ... | NF_DENSITY | CHAIN | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains -| ... | 1 docker container* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | chain_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-8memif-4chain-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 3fe578fa3a..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,124 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 16 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc04-1518B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc07-9000B-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-16dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot deleted file mode 100644 index b2f1cce3c0..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 4 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-8memif-4pipe-4dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot b/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot deleted file mode 100644 index 27cfe858ee..0000000000 --- a/tests/vpp/perf/container_memif/2n-10ge2p1x710-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr.robot +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C -| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 -| ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| Suite Teardown | Tear down 2-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Run Keywords -| ... | Tear down performance test -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local Template -| ... -| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8memif 4 -| ... | pipelines 8 docker containers* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n -# Container -| ${container_engine}= | Docker -| ${container_chain_topology}= | pipeline_ip4 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} -| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bd-8memif-4pipe-8dcr-vppip4-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} -- cgit 1.2.3-korg