From 6721e7f09aa95bff6622068332a3f56afad9c87b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Tue, 20 Jun 2017 13:57:08 +0200 Subject: CSIT-687: Directory structure reorganization Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank Signed-off-by: Maciek Konstantynowicz --- ...520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot | 226 +++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot (limited to 'tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot') diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot new file mode 100644 index 0000000000..69c0f60cfc --- /dev/null +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot @@ -0,0 +1,226 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.Policer +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK +| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance ndrchk test +| ... +| Documentation | *Reference NDR throughput IPv4 policer verify test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 route entries and policer with 2R3C +| ... | color-aware configuration. Policer is applied on links TG - DUT1 and +| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In short performance tests, TG verifies +| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet +| ... | loss tolerance. Ref-NDR value is periodically updated acording to +| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long +| ... | performance tests for the same DUT configuration. Test packets are +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 +| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with +| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 +| ... | and static payload. MAC addresses are matching MAC addresses of the +| ... | TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. + +*** Variables *** +| ${cir}= | ${100} +| ${eir}= | ${150} +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ +| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \ +| | ... | Byte frames using single trial throughput test at 2x 3.6mpps. +| | [Tags] | 64B | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${64} +| | ${rate}= | Set Variable | 3.6mpps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ +| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 \ +| | ... | Byte frames using single trial throughput test at 2x 812743pps. +| | [Tags] | 1518B | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${1518} +| | ${rate}= | Set Variable | 812743pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ +| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 \ +| | ... | Byte frames using single trial throughput test at 2x 138580pps. +| | [Tags] | 9000B | 1T1C | STHREAD +| | ${framesize}= | Set Variable | ${9000} +| | ${rate}= | Set Variable | 138580pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc04-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ +| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ +| | ... | 64 Byte frames using single trial throughput test at 2x 6.2mpps. +| | [Tags] | 64B | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${64} +| | ${rate}= | Set Variable | 6.2mpps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc05-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ +| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ +| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${1518} +| | ${rate}= | Set Variable | 812743pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc06-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ +| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ +| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ${framesize}= | Set Variable | ${9000} +| | ${rate}= | Set Variable | 138580pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc07-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ +| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \ +| | ... | Byte frames using single trial throughput test at 2x 10.4mpps. +| | [Tags] | 64B | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${64} +| | ${rate}= | Set Variable | 10.4mpps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc08-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ +| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \ +| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${1518} +| | ${rate}= | Set Variable | 812743pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} + +| tc09-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ +| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \ +| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ${framesize}= | Set Variable | ${9000} +| | ${rate}= | Set Variable | 138580pps +| | Set Test Variable | ${cb} | ${framesize} +| | Set Test Variable | ${eb} | ${framesize} +| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPv4 forwarding in 3-node circular topology +| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${traffic_profile} -- cgit 1.2.3-korg