From 2d15316360dbf0b57318801b51decbbf842a8660 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Tue, 24 Apr 2018 14:00:04 +0200 Subject: Remove obsolete NDRPDR checks Change-Id: If495493f4dce8d2eecfb8c06bcd587f315b70b1d Signed-off-by: Peter Mikus --- ...x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot | 183 ------------------ ...2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot | 188 ------------------ ...520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot | 171 ----------------- .../ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot | 164 ---------------- .../ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot | 183 ------------------ .../10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot | 201 -------------------- .../10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot | 210 --------------------- .../ip4/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot | 210 --------------------- .../ip4/10ge2p1x520-ethip4-ip4scale2m-pdrchk.robot | 185 ------------------ 9 files changed, 1695 deletions(-) delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-pdrchk.robot (limited to 'tests/vpp/perf/ip4') diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot deleted file mode 100644 index 68ce215a9b..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot +++ /dev/null @@ -1,183 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Cop -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Check NDR for ethip4-ip4base-copwhtlistbase -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding in 3-node circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And Add Fib Table | ${dut2} | 1 -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 4.0mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${64} | rate=4.0mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 7.2mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${64} | rate=7.2mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${64} | rate=10.4mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2 - -| tc09-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-copwhtlistbase -| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot deleted file mode 100644 index d061928f36..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot +++ /dev/null @@ -1,188 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Check NDR for ethip4-ip4base-iacldstbase -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv4 forwarding in 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 3.6mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${64} | rate=3.6mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 6.3mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${64} | rate=6.3mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test -| | ... | at 2x 9.7mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${64} | rate=9.7mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test -| | ... | at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2 - -| tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test -| | ... | at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-iacldstbase -| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot deleted file mode 100644 index df67cc7aeb..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.Policer -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 policer verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. - -*** Variables *** -| ${cir}= | ${100} -| ${eir}= | ${150} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Check NDR for ethip4-ip4base-ipolicemarkbase -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding in 3-node circular topology -| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology -| | Then Traffic should pass with no loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ -| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \ -| | ... | Byte frames using single trial throughput test at 2x 3.6mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${64} | rate=3.6mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ -| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 \ -| | ... | Byte frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \ -| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 \ -| | ... | Byte frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ -| | ... | 64 Byte frames using single trial throughput test at 2x 6.2mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${64} | rate=6.2mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ -| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \ -| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ -| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \ -| | ... | Byte frames using single trial throughput test at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${64} | rate=10.4mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ -| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \ -| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2 - -| tc09-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \ -| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \ -| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base-ipolicemarkbase -| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot deleted file mode 100644 index 0bccc2920e..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Check NDR for ethip4-ip4base -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding in 3-node circular topology -| | Then Traffic should pass with no loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 4.6mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${64} | rate=4.6mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 9.4mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${64} | rate=10.4mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2 - -| tc09-9000B-4t4c-ethip4-ip4base-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check NDR for ethip4-ip4base -| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot deleted file mode 100644 index 2ae729d41e..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot +++ /dev/null @@ -1,183 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | IP4BASE -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance pdrchk test -| ... -| Documentation | *Reference PDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-PDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-PDR value is periodically updated acording to -| ... | formula: ref-PDR = 0.9x PDR, where PDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Check PDR for ethip4-ip4base -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Verify ref-PDR for ${framesize} frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding in 3-node circular topology -| | Then Traffic should pass with partial loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte\ -| | ... | frames using single trial throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${64} | rate=4.7mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${1518} | rate=400000pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 9000 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${9000} | rate=60000pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 2T2C | STHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${1518} | rate=400000pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 9000 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${9000} | rate=60000pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 thread, 4 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${64} | rate=7.4mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 thread, 4 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${1518} | rate=400000pps | wt=4 | rxq=2 - -| tc08-9000B-4t4c-ethip4-ip4base-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 thread, 4 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 9000 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for ethip4-ip4base -| | framesize=${9000} | rate=60000pps | wt=4 | rxq=2 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot deleted file mode 100644 index abb34c2794..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot +++ /dev/null @@ -1,201 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested -| ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT confiiguration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 100k flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. Incrementing of IP.dst (IPv4 destination address) -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${rts_per_flow}= | ${100000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 4.3mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 4.3mpps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc02-1518B-1t1c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc03-9000B-1t1c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc04-64B-2t2c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 9.1mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 9.1mpps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc05-1518B-2t2c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc06-9000B-2t2c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc07-64B-4t4c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 10.4mpps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc08-1518B-4t4c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} - -| tc09-9000B-4t4c-ethip4-ip4scale200k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot deleted file mode 100644 index 8303a4e139..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot +++ /dev/null @@ -1,210 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested -| ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT confiiguration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 10k flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. Incrementing of IP.dst (IPv4 destination address) -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${rts_per_flow}= | ${10000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 4.3mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 4.3mpps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc02-1518B-1t1c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc03-9000B-1t1c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc04-64B-2t2c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 9.0mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 9.0mpps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc05-1518B-2t2c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc06-9000B-2t2c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc07-64B-4t4c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 10.4mpps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc08-1518B-4t4c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc09-9000B-4t4c-ethip4-ip4scale20k-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot deleted file mode 100644 index 84fc806d23..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot +++ /dev/null @@ -1,210 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance ndrchk test -| ... -| Documentation | *Reference NDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested -| ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT confiiguration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 1M flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. Incrementing of IP.dst (IPv4 destination address) -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${rts_per_flow}= | ${1000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 3.7mpps. -| | [Tags] | 64B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 3.7mpps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc02-1518B-1t1c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | Verify ref-NDR for 1518 Byte frames using single trial throughput -| | ... | test. DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 -| | ... | receive queue per NIC port at 2x 812743pps. -| | [Tags] | 1518B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc03-9000B-1t1c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 1T1C | STHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc04-64B-2t2c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 7.6mpps. -| | [Tags] | 64B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 7.6mpps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc05-1518B-2t2c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc06-9000B-2t2c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc07-64B-4t4c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte -| | ... | frames using single trial throughput test at 2x 10.4mpps. -| | [Tags] | 64B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${64} -| | ${rate}= | Set Variable | 10.4mpps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc08-1518B-4t4c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte -| | ... | frames using single trial throughput test at 2x 812743pps. -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${1518} -| | ${rate}= | Set Variable | 812743pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} - -| tc09-9000B-4t4c-ethip4-ip4scale2m-ndrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte -| | ... | frames using single trial throughput test at 2x 138580pps. -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ${framesize}= | Set Variable | ${9000} -| | ${rate}= | Set Variable | 138580pps -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} -| | ... | ${traffic_profile} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-pdrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-pdrchk.robot deleted file mode 100644 index 0a5133aff1..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-pdrchk.robot +++ /dev/null @@ -1,185 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance pdrchk test -| ... -| Documentation | *Reference PDR throughput IPv4 routing verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested -| ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG verifies throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. Ref-PDR value is periodically updated acording -| ... | to formula: ref-PDR = 0.9x PDR, where PDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 1M flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and static payload. Incrementing of IP.dst (IPv4 destination address) -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${rts_per_flow}= | ${1000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst${rts_per_flow} - -*** Keywords *** -| Check PDR for IPv4 routing -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for ${framesize} Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq} -| | ... -| | # Test Variables required for test and test teardown -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${rate} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | And Add PCI devices to DUTs in 3-node single link topology -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding with scaling in 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with partial loss | ${perf_trial_duration} -| | ... | ${rate} | ${framesize} | ${traffic_profile} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${64} | rate=3.0mpps | wt=1 | rxq=1 - -| tc02-1518B-1t1c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | trial throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${1518} | rate=600000pps | wt=1 | rxq=1 - -| tc03-9000B-1t1c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${9000} | rate=100000pps | wt=1 | rxq=1 - -| tc04-64B-2t2c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${64} | rate=7.0mpps | wt=2 | rxq=1 - -| tc05-1518B-2t2c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${1518} | rate=500000pps | wt=2 | rxq=1 - -| tc06-9000B-2t2c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Verify ref-PDR for 9000 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${9000} | rate=100000pps | wt=2 | rxq=1 - -| tc07-64B-4t4c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Verify ref-PDR for 64 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${64} | rate=10.0mpps | wt=4 | rxq=2 - -| tc08-1518B-4t4c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Verify ref-PDR for 1518 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${1518} | rate=500000pps | wt=4 | rxq=2 - -| tc09-9000B-4t4c-ethip4-ip4scale2m-pdrchk -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Verify ref-PDR for 9000 Byte frames using single trial\ -| | ... | throughput test at 2x ${rate}. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check PDR for IPv4 routing -| | framesize=${9000} | rate=100000pps | wt=4 | rxq=2 -- cgit 1.2.3-korg