From ad71afc5baa8008bd5d4ea26f51a71eefe3fbe62 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Tue, 10 Jul 2018 06:10:41 +0000 Subject: Refactor perf test cases - Refactor Performance TCs due to changes in Hyperthreading and RXQ allocations. - Simplify the structure of suite to avoid large refactors in future. Change-Id: Ifb1b9719391f26745f075a900bd9fb39b6cb809c Signed-off-by: Peter Mikus --- .../10ge2p1x520-ethip4lispip4-ip4base-mrr.robot | 156 ++++---------------- ...e2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot | 36 ++--- ...e2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot | 36 ++--- ...0ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot | 144 ++++--------------- ...520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot | 36 ++--- .../10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot | 143 ++++--------------- ...ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot | 36 ++--- .../10ge2p1x710-ethip4lispip4-ip4base-mrr.robot | 157 ++++----------------- ...0ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot | 145 ++++--------------- .../10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot | 145 ++++--------------- 10 files changed, 226 insertions(+), 808 deletions(-) (limited to 'tests/vpp/perf/ip4_tunnels') diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot index a925929c8b..f86f1bf419 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot @@ -27,6 +27,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,16 +55,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4lispip4-ip4base -| | ... +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config with ${wt} thread(s), ${wt} phy core(s), ${rxq} receive\ -| | ... | queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... | | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} @@ -70,7 +77,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${lisp_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -88,160 +95,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1480B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${1480} +| | phy_cores=${1} | framesize=${1480} | tc03-9000B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1480B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${1480} +| | phy_cores=${2} | framesize=${1480} | tc07-9000B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1480B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${1480} +| | phy_cores=${4} | framesize=${1480} | tc11-9000B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot index e1e1aa4fc8..7b75d7d48f 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot @@ -65,7 +65,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -95,7 +95,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -126,7 +126,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -156,7 +156,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -187,7 +187,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -216,7 +216,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -246,7 +246,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -276,7 +276,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -307,7 +307,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -337,7 +337,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -368,7 +368,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -397,7 +397,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -427,7 +427,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -457,7 +457,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -488,7 +488,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -518,7 +518,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -549,7 +549,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -578,7 +578,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot index 162db49639..5f3f7bdd42 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -127,7 +127,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -157,7 +157,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -188,7 +188,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -308,7 +308,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -338,7 +338,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -398,7 +398,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -428,7 +428,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -458,7 +458,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -489,7 +489,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -519,7 +519,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -550,7 +550,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -579,7 +579,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot index 2273ef4b66..093ffea82d 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,28 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot index 50318db9a7..ddf080230a 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot @@ -72,7 +72,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -121,7 +121,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -144,7 +144,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -168,7 +168,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -191,7 +191,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -215,7 +215,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -239,7 +239,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -264,7 +264,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -287,7 +287,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -311,7 +311,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -334,7 +334,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -382,7 +382,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -407,7 +407,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -430,7 +430,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -454,7 +454,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -477,7 +477,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot index e611431f8c..5c9020f66a 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot @@ -51,23 +51,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2xcbase -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +82,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot index 615aa57e7e..9598dd0294 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot @@ -68,7 +68,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -89,7 +89,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -111,7 +111,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -131,7 +131,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -152,7 +152,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -172,7 +172,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -193,7 +193,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -214,7 +214,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -236,7 +236,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -256,7 +256,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -297,7 +297,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -318,7 +318,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -339,7 +339,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -361,7 +361,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -422,7 +422,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot index a804b72cac..9ad56b6a80 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot @@ -27,6 +27,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,24 +55,28 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4lispip4-ip4base -| | ... +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config with ${wt} thread(s), ${wt} phy core(s), ${rxq} receive\ -| | ... | queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${lisp_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -88,160 +94,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1480B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${1480} +| | phy_cores=${1} | framesize=${1480} | tc03-9000B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1480B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${1480} +| | phy_cores=${2} | framesize=${1480} | tc07-9000B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1480B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${1480} +| | phy_cores=${4} | framesize=${1480} | tc11-9000B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot index 6cc7f35537..29a9a215e9 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot index b8c3f5c2c2..22fc9f44dc 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2xcbase -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 -- cgit 1.2.3-korg