From a49ab6c44a8ca3f82b15b6ae59237cd340576164 Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Thu, 17 May 2018 14:17:20 +0200 Subject: CSIT-1087: Add SRv6 MRR tests Change-Id: Ia90a9bff6791518ba08fa81e6167e96aea7714d5 Signed-off-by: Tibor Frank --- ...0-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot | 266 +++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot (limited to 'tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot') diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot new file mode 100644 index 0000000000..87c240ae72 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot @@ -0,0 +1,266 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | SRv6_PROXY_STAT | MEMIF | LXC +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L3 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance test suite with Static SRv6 proxy +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ +| ... | Static SRv6 proxy test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End.AS - for other\ +| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ +| ... | by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2003:1::1 +| ${out_sid1_1}= | 2002:3:: +| ${out_sid1_2}= | 2002:4:: +| ${out_sid2_1}= | 2003:3:: +| ${out_sid2_2}= | 2003:4:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut1-memif-1-if1_ip6}= | 3001:1::1 +| ${dut1-memif-1-if2_ip6}= | 3001:1::2 +| ${dut1_nh}= | 4002:: +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${dut2-memif-1-if1_ip6}= | 3002:1::1 +| ${dut2-memif-1-if2_ip6}= | 3002:1::2 +| ${dut2_nh}= | 4001:: +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${srv6_overhead_3sids}= | ${96} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | LXC +| ${container_image}= | ${EMPTY} +| ${container_install_dkms}= | ${FALSE} +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${rxq} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_3sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 -- cgit 1.2.3-korg