From 44e82a32bb10129d1f85d12e5141de2a17d5ff1a Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Thu, 17 May 2018 14:31:43 +0200 Subject: VPP link bonding - lacp mode CSIT-1072 CSIT-1083 CSIT-1084 Change-Id: Icaf0e09af633d301306a84251f47822e95b411a2 Signed-off-by: Jan Gelety --- ...q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot | 265 +++++++++++++++++++++ 1 file changed, 265 insertions(+) create mode 100644 tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot (limited to 'tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot') diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot new file mode 100644 index 0000000000..5001e1e74a --- /dev/null +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -0,0 +1,265 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM +| ... | VHOST_1024 | LBOND | LBOND_VPP| LBOND_MODE_LACP | LBOND_LB_L34 +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with LACP mode link bonding +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown +| ... | Tear down performance mrr test with vhost and VM with dpdk-testpmd +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... +| Documentation | *Raw results L2BD test cases with vhost and vpp link bonding* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q +| ... | tagging is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu Guest is +| ... | connected to VPP via vhost-user interfaces. Guest is running DPDK +| ... | testpmd interconnecting vhost-user interfaces using 5 cores pinned to +| ... | cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M +| ... | hugepages), 5 cores (1 main core and 4 cores dedicated for io), +| ... | forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are +| ... | tested with 2p10GE NIC X710 Fortville by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +| ${vlan_overhead}= | ${4} +# Link bonding config +| ${bond_mode}= | lacp +| ${lb_mode}= | l34 +# Socket names +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 +| ${sock1}= | /tmp/sock-1-${bd_id1} +| ${sock2}= | /tmp/sock-1-${bd_id2} +# X710 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ +| | ... | core, ${rxq} receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | # Test Variables required for test and test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize + ${vlan_overhead}} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology +| | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} +| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} +| | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo_frames} +| | And Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1} +| | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 +| | ... | jumbo_frames=${jumbo_frames} +| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} +| | And All Vpp Interfaces Ready Wait | ${nodes} +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy\ +| | ... | cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy\ +| | ... | cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy\ +| | ... | cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy\ +| | ... | cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 -- cgit 1.2.3-korg