From 036e5a85bab081bfa94b8c025c06aee0addb94cb Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Wed, 28 Jun 2017 22:14:51 +0200 Subject: XL710 Configure rxd/txd 2048 Configure RX-desc and TX-desc to 2048 for FVL XL710 cards. Change-Id: I1876f332bdc6100bf24f2b2317de33c0d1a4c9bf Signed-off-by: Peter Mikus --- ...secbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot | 16 +++ ...ecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot | 16 +++ ...secbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot | 16 +++ ...ecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot | 16 +++ ...ale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot | 16 +++ ...le1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot | 16 +++ ...ale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot | 16 +++ ...le1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot | 16 +++ ...sectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot | 20 ++++ .../40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot | 18 +++ .../40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot | 12 ++ ...0ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot | 129 +++++++++------------ .../l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot | 18 +++ 13 files changed, 251 insertions(+), 74 deletions(-) (limited to 'tests/vpp') diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index 86670fecc6..6b9333c2b8 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -126,6 +128,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -159,6 +163,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -191,6 +197,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -226,6 +234,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -260,6 +270,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -293,6 +305,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -325,6 +339,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index c78d3ca67d..f98fe78c16 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -126,6 +128,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -158,6 +162,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -189,6 +195,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -223,6 +231,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -256,6 +266,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -289,6 +301,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -321,6 +335,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 85ddc9f663..c1daad5e16 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -129,6 +131,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -165,6 +169,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -200,6 +206,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -238,6 +246,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -275,6 +285,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -311,6 +323,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -346,6 +360,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index 1002f53e5d..b51a61515a 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -129,6 +131,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -164,6 +168,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -198,6 +204,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -235,6 +243,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -271,6 +281,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -307,6 +319,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -342,6 +356,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index ac8f8603b9..d5bb8aba40 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -126,6 +128,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -159,6 +163,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -191,6 +197,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -226,6 +234,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -260,6 +270,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -293,6 +305,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -325,6 +339,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index c46da5a82d..6f9263ad02 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -126,6 +128,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -158,6 +162,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -189,6 +195,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -223,6 +231,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -256,6 +266,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -289,6 +301,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces @@ -321,6 +335,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 6e5a7dfbd9..09a26b816c 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -129,6 +131,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -165,6 +169,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -200,6 +206,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -238,6 +246,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -275,6 +285,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -311,6 +323,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -346,6 +360,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index cceaaf846a..27b319ed5c 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -94,6 +94,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -129,6 +131,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -164,6 +168,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -198,6 +204,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -235,6 +243,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -271,6 +281,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -307,6 +319,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} @@ -342,6 +356,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot index 141d3f7ce1..20ee18d23f 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot @@ -93,6 +93,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -123,6 +125,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -153,6 +157,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -182,6 +188,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -213,6 +221,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -243,6 +253,8 @@ | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} | | And Add PCI devices to DUTs in 3-node single link topology | | And Add cryptodev to all DUTs | ${1} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -274,6 +286,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -304,6 +318,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -335,6 +351,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} @@ -365,6 +383,8 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot index 1dbda15832..8f7d9df017 100644 --- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot @@ -79,6 +79,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -100,6 +102,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -121,6 +125,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -142,6 +148,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -163,6 +171,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -184,6 +194,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -206,6 +218,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -228,6 +242,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -250,6 +266,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot index 4c45fdd266..0db7c9dd7a 100644 --- a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot @@ -71,6 +71,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -92,6 +94,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -113,6 +117,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -134,6 +140,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -155,6 +163,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -176,6 +186,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot index 595bc029ce..7792897761 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -57,8 +57,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| L2 Bridge Domain NDR Binary Search BW limit +| L2 Bridge Domain Binary Search BW limit | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | ... | ${search_type} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} @@ -69,35 +70,26 @@ | | Add PCI devices to DUTs in 3-node single link topology | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs +| | Add DPDK dev default RXD to all DUTs | 2048 +| | Add DPDK dev default TXD to all DUTs | 2048 | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology -| | Find NDR using binary search and pps +| | Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} - -| L2 Bridge Domain NDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${max_rate}= | Set Variable | ${s_limit} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs -| | Apply startup configuration on all VPP DUTs -| | Initialize L2 bridge domain in 3-node circular topology -| | Find NDR using binary search and pps +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} -| L2 Bridge Domain PDR Binary Search BW limit +| L2 Bridge Domain Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | ... | ${search_type} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${max_rate}= | Set Variable | ${s_limit} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} @@ -105,128 +97,117 @@ | | Add PCI devices to DUTs in 3-node single link topology | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs +| | Add DPDK dev default RXD to all DUTs | 2048 +| | Add DPDK dev default TXD to all DUTs | 2048 | | Apply startup configuration on all VPP DUTs | | Initialize L2 bridge domain in 3-node circular topology -| | Find PDR using binary search and pps +| | Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -| L2 Bridge Domain PDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs -| | Apply startup configuration on all VPP DUTs -| | Initialize L2 bridge domain in 3-node circular topology -| | Find PDR using binary search and pps +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 -| | ... | s_limit=${s_18.75Mpps} -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ | | ... | 18.75Mpps rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search +| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 +| | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 -| | ... | s_limit=${s_24.5G} -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at\ | | ... | 24.5G rate, step 10kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 +| | ... | s_limit=${s_24.5G} | search_type=NDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 -| | ... | s_limit=${s_18.75Mpps} -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ | | ... | 18.75Mpps rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search +| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 +| | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 -| | ... | s_limit=${s_24.5G} -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ | | ... | 24.5G rate, step 10kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 +| | ... | s_limit=${s_24.5G} | search_type=NDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${100000} | wt=4 | rxq=2 -| | ... | s_limit=${s_18.75Mpps} -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ | | ... | 18.75Mpps rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search +| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=4 | rxq=2 +| | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${10000} | wt=4 | rxq=2 -| | ... | s_limit=${s_24.5G} -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at\ | | ... | 24.5G rate, step 10kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=${1518} | min_rate=${10000} | wt=4 | rxq=2 +| | ... | s_limit=${s_24.5G} | search_type=NDR | tc19-IMIX-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=IMIX_v4_1 | min_rate=${100000} | wt=1 | rxq=1 -| | ... | s_limit=${s_24.5G} -| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ | | ... | 24.5G rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=IMIX_v4_1 | min_rate=${100000} | wt=1 | rxq=1 +| | ... | s_limit=${s_24.5G} | search_type=NDR | tc20-IMIX-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=IMIX_v4_1 | min_rate=${100000} | wt=2 | rxq=1 -| | ... | s_limit=${s_24.5G} -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ | | ... | 24.5G rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=IMIX_v4_1 | min_rate=${100000} | wt=2 | rxq=1 +| | ... | s_limit=${s_24.5G} | search_type=NDR | tc21-IMIX-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=IMIX_v4_1 | min_rate=${100000} | wt=4 | rxq=2 -| | ... | s_limit=${s_24.5G} -| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with with\ | | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ | | ... | 24.5G rate, step 100kpps. -| | [Template] | L2 Bridge Domain NDR Binary Search BW limit +| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search BW limit +| | framesize=IMIX_v4_1 | min_rate=${100000} | wt=4 | rxq=2 +| | ... | s_limit=${s_24.5G} | search_type=NDR + diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot index 4c6f279e8d..134ea6d25e 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot @@ -73,6 +73,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -94,6 +96,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -115,6 +119,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -136,6 +142,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -157,6 +165,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -178,6 +188,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -200,6 +212,8 @@ | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -222,6 +236,8 @@ | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} @@ -244,6 +260,8 @@ | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology | | And Add no multi seg to all DUTs +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -- cgit 1.2.3-korg