From 9446b9bf9c15999feec3c8a48fec428bca094500 Mon Sep 17 00:00:00 2001 From: Tomas Alexy Date: Mon, 4 Jan 2021 10:15:51 +0100 Subject: API: deprecated COP APIs Signed-off-by: Tomas Alexy Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64 --- .../eth2p-ethip4-ip4base-adlalwlistbase-dev.robot | 86 ++++++++++++ .../eth2p-ethip4-ip4base-adlblklistbase-dev.robot | 86 ++++++++++++ .../eth2p-ethip4-ip4base-copblklistbase-dev.robot | 86 ------------ .../eth2p-ethip4-ip4base-copwhtlistbase-dev.robot | 86 ------------ .../eth2p-ethip6-ip6base-adlalwlistbase-dev.robot | 86 ++++++++++++ .../eth2p-ethip6-ip6base-adlblklistbase-dev.robot | 86 ++++++++++++ .../eth2p-ethip6-ip6base-copblklistbase-dev.robot | 86 ------------ .../eth2p-ethip6-ip6base-copwhtlistbase-dev.robot | 86 ------------ ...x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot | 145 ++++++++++++++++++++ ...x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot | 145 -------------------- ...x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot | 141 ++++++++++++++++++++ ...x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot | 141 -------------------- ...x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot | 146 ++++++++++++++++++++ ...x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot | 147 --------------------- ...x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot | 142 ++++++++++++++++++++ ...x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot | 143 -------------------- 16 files changed, 918 insertions(+), 920 deletions(-) create mode 100644 tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlalwlistbase-dev.robot create mode 100644 tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlblklistbase-dev.robot delete mode 100644 tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot delete mode 100644 tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot create mode 100644 tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlalwlistbase-dev.robot create mode 100644 tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlblklistbase-dev.robot delete mode 100644 tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot delete mode 100644 tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot create mode 100644 tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot delete mode 100644 tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot create mode 100644 tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot delete mode 100644 tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot create mode 100644 tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot delete mode 100644 tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot create mode 100644 tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot delete mode 100644 tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot (limited to 'tests/vpp') diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlalwlistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlalwlistbase-dev.robot new file mode 100644 index 0000000000..b839bed5a3 --- /dev/null +++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlalwlistbase-dev.robot @@ -0,0 +1,86 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *ADL Security IPv4 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ +| ... | static routes. ADL security allowlist are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ +| | ... | verify received IPv4 pkts are correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Send packet and verify headers +| | ... | ${tg} | 10.10.10.2 | 20.20.20.2 +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 64B-ethip4-ip4base-adlalwlistbase-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlblklistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlblklistbase-dev.robot new file mode 100644 index 0000000000..bd35ccd623 --- /dev/null +++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-adlblklistbase-dev.robot @@ -0,0 +1,86 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | ADLBLKLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-adlblklistbase +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *ADL Security IPv4 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ +| ... | static routes. ADL security allowlist are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ +| | ... | verify received IPv4 pkts are correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Packet transmission from port to port should fail +| | ... | ${tg} | 100.0.0.2 | 200.0.0.2 +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 64B-ethip4-ip4base-adlblklistbase-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot deleted file mode 100644 index e06aac4240..0000000000 --- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPBLKLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4-ip4base-copblklistbase -| -| Suite Setup | Setup suite topology interfaces | scapy -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace -| -| Test Template | Local Template -| -| Documentation | *COP Security IPv4 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | static routes. COP security white-lists is applied on DUT1 ingress \ -| ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${overhead}= | ${0} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ -| | ... | verify received IPv4 pkts are correct. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer. Type: integer -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Packet transmission from port to port should fail -| | ... | ${tg} | 100.0.0.2 | 200.0.0.2 -| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] -| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] - -*** Test Cases *** -| 64B-ethip4-ip4base-copblklistbase-dev -| | [Tags] | 64B -| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot deleted file mode 100644 index 2e1d61b307..0000000000 --- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4-ip4base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | scapy -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace -| -| Test Template | Local Template -| -| Documentation | *COP Security IPv4 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | static routes. COP security white-lists is applied on DUT1 ingress \ -| ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${overhead}= | ${0} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \ -| | ... | verify received IPv4 pkts are correct. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer. Type: integer -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Send packet and verify headers -| | ... | ${tg} | 10.10.10.2 | 20.20.20.2 -| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] -| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] - -*** Test Cases *** -| 64B-ethip4-ip4base-copwhtlistbase-dev -| | [Tags] | 64B -| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlalwlistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlalwlistbase-dev.robot new file mode 100644 index 0000000000..eb9616d751 --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlalwlistbase-dev.robot @@ -0,0 +1,86 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-ip6base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *ADL Security IPv6 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | static routes. ADL security allowlists are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | verify received IPv6 pkts are correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv6 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Send packet and verify headers +| | ... | ${tg} | 2001:1::2 | 2001:2::2 +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 78B-ethip6-ip6base-adlalwlistbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlblklistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlblklistbase-dev.robot new file mode 100644 index 0000000000..7640521677 --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-adlblklistbase-dev.robot @@ -0,0 +1,86 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | ADLBLKLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-ip6base-adlblklistbase +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *ADL Security IPv6 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | static routes. ADL security allowlists are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | verify received IPv6 pkts are correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv6 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 | ipv6=${True} +| | And Vpp Route Add | ${dut1} | 2002:1::0 | 64 | vrf=1 | local=${True} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Packet transmission from port to port should fail +| | ... | ${tg} | 2002:1::2 | 2002:2::2 +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 78B-ethip6-ip6base-adlblklistbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot deleted file mode 100644 index b13b752feb..0000000000 --- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPBLKLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip6-ip6base-copblklistbase -| -| Suite Setup | Setup suite topology interfaces | scapy -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace -| -| Test Template | Local Template -| -| Documentation | *COP Security IPv6 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ -| ... | static routes. COP security white-lists are applied on DUT1 ingress \ -| ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${overhead}= | ${0} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ -| | ... | verify received IPv6 pkts are correct. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer. Type: integer -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv6 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 | ipv6=${True} -| | And Vpp Route Add | ${dut1} | 2002:1::0 | 64 | vrf=1 | local=${True} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Packet transmission from port to port should fail -| | ... | ${tg} | 2002:1::2 | 2002:2::2 -| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] -| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] - -*** Test Cases *** -| 78B-ethip6-ip6base-copblklistbase-dev -| | [Tags] | 78B -| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot deleted file mode 100644 index 7918d1a260..0000000000 --- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip6-ip6base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | scapy -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace -| -| Test Template | Local Template -| -| Documentation | *COP Security IPv6 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ -| ... | static routes. COP security white-lists are applied on DUT1 ingress \ -| ... | interface from TG. -| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${overhead}= | ${0} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ -| | ... | verify received IPv6 pkts are correct. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer. Type: integer -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv6 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} -| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Send packet and verify headers -| | ... | ${tg} | 2001:1::2 | 2001:2::2 -| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] -| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] - -*** Test Cases *** -| 78B-ethip6-ip6base-copwhtlistbase-dev -| | [Tags] | 78B -| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot new file mode 100644 index 0000000000..64fcc09c73 --- /dev/null +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot @@ -0,0 +1,145 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist +| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. +| ... | DUT1 and DUT2 tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +# Traffic profile +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 +| | And ADL Add allowlist Entry | ${dut2} | ${DUT2_${int}2}[0] | ip4 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | And ADL interface enable or disable | ${dut2} | ${DUT2_${int}2}[0] | enable +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot deleted file mode 100644 index 3ebc380342..0000000000 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ /dev/null @@ -1,145 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4-ip4base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${0} -# Traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And Add Fib Table | ${dut2} | 1 -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${DUT2_${int}2}[0] | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | And COP interface enable or disable | ${dut2} | ${DUT2_${int}2}[0] | enable -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot new file mode 100644 index 0000000000..a68c79077b --- /dev/null +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-ndrpdr.robot @@ -0,0 +1,141 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing, two static IPv4 /24 routes and IPv4 ADL security allowlist +| ... | ingress /24 filter entries applied on links TG - DUT1. +| ... | DUT1 tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +# Traffic profile +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4-ip4base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot deleted file mode 100644 index 1ec02d2fc3..0000000000 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ /dev/null @@ -1,141 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4-ip4base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${0} -# Traffic profile -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv4 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4-ip4base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot new file mode 100644 index 0000000000..b5bd9f2beb --- /dev/null +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot @@ -0,0 +1,146 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-ip6base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 +| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist +| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. +| ... | DUT1 and DUT2 tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv6 header and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip6-ip6src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv6 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 +| | And ADL Add allowlist Entry | ${dut2} | ${DUT2_${int}2}[0] | ip6 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | And ADL interface enable or disable | ${dut2} | ${DUT2_${int}2}[0] | enable +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 78B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 1C +| | frame_size=${78} | phy_cores=${1} + +| 78B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 2C +| | frame_size=${78} | phy_cores=${2} + +| 78B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 4C +| | frame_size=${78} | phy_cores=${4} + +| 1518B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot deleted file mode 100644 index a0597b2918..0000000000 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot +++ /dev/null @@ -1,147 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Library | resources.libraries.python.Cop -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip6-ip6base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance | performance -| Test Teardown | Tear down test | performance -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist -| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip6-ip6src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with -| | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv6 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} -| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} -| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} -| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${DUT2_${int}2}[0] | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | And COP interface enable or disable | ${dut2} | ${DUT2_${int}2}[0] | enable -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 78B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 1C -| | frame_size=${78} | phy_cores=${1} - -| 78B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 2C -| | frame_size=${78} | phy_cores=${2} - -| 78B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 4C -| | frame_size=${78} | phy_cores=${4} - -| 1518B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot new file mode 100644 index 0000000000..5c235b87b2 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-ip6base-adlalwlistbase +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 +| ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist +| ... | ingress /64 filter entries applied on links TG - DUT1. +| ... | DUT1 is tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv6 header and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip6-ip6src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv6 forwarding in circular topology +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 +| | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 78B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 1C +| | frame_size=${78} | phy_cores=${1} + +| 78B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 2C +| | frame_size=${78} | phy_cores=${2} + +| 78B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 78B | 4C +| | frame_size=${78} | phy_cores=${4} + +| 1518B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip6-ip6base-adlalwlistbase-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot deleted file mode 100644 index db31263a3d..0000000000 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot +++ /dev/null @@ -1,143 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Library | resources.libraries.python.Cop -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip6-ip6base-copwhtlistbase -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance | performance -| Test Teardown | Tear down test | performance -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 -| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist -| ... | ingress /64 filter entries applied on links TG - DUT1. -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | adl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip6-ip6src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with -| | ... | ${phy_cores} phy core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPv6 forwarding in circular topology -| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} -| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} -| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 78B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 1C -| | frame_size=${78} | phy_cores=${1} - -| 78B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 2C -| | frame_size=${78} | phy_cores=${2} - -| 78B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 78B | 4C -| | frame_size=${78} | phy_cores=${4} - -| 1518B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip6-ip6base-copwhtlistbase-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} -- cgit 1.2.3-korg