From aafa2efa63b891e85ff13255691aae4909bc503c Mon Sep 17 00:00:00 2001 From: Nidhy Date: Sat, 31 Aug 2019 12:53:12 +0000 Subject: LISP: 3-node (func) to 2-node (dev) converstion Change-Id: I0fbe4d9ef1b30a1ac1382ea43b5b52aeb8a7d39f Signed-off-by: Nidhy --- .../lisp/eth2p-ethip4lisp-ip4base-dev.robot | 82 +++++++++++++ .../lisp/eth2p-ethip4lispgpe-ip4base-dev.robot | 83 +++++++++++++ .../lisp/eth2p-ethip4lispgpe-ip6base-dev.robot | 85 ++++++++++++++ .../lisp/eth2p-ethip6lispgpe-ip4base-dev.robot | 84 ++++++++++++++ .../lisp/eth2p-ethip6lispgpe-ip6base-dev.robot | 83 +++++++++++++ tests/vpp/func/ip4_tunnels/__init__.robot | 12 -- .../lisp/eth2p-ethip4lisp-ip4base-func.robot | 129 --------------------- .../lisp/eth2p-ethip4lispgpe-ip4base-func.robot | 107 ----------------- .../lisp/eth2p-ethip4lispgpe-ip6base-func.robot | 110 ------------------ tests/vpp/func/ip6_tunnels/__init__.robot | 12 -- .../lisp/eth2p-ethip6lispgpe-ip4base-func.robot | 99 ---------------- .../lisp/eth2p-ethip6lispgpe-ip6base-func.robot | 106 ----------------- 12 files changed, 417 insertions(+), 575 deletions(-) create mode 100644 tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot create mode 100644 tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot create mode 100644 tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot create mode 100644 tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot create mode 100644 tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot delete mode 100644 tests/vpp/func/ip4_tunnels/__init__.robot delete mode 100644 tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot delete mode 100644 tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot delete mode 100644 tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot delete mode 100644 tests/vpp/func/ip6_tunnels/__init__.robot delete mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot delete mode 100644 tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot (limited to 'tests/vpp') diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot new file mode 100644 index 0000000000..db5b3227d4 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot @@ -0,0 +1,82 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISP_IP4o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lisp-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\ +| ... | over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\ +| ... | routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\ +| ... | packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv4 LISP testing +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} +| | ... | ${dut1_to_tg_ip4_static_adjacency} +| | Then Send packet and verify LISP encap +| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} + +*** Test Cases *** +| tc01-46B-ethip4lisp-ip4base-dev +| | [Tags] | 46B +| | frame_size=${46} | phy_cores=${0} diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot new file mode 100644 index 0000000000..f4b2cb50c1 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot @@ -0,0 +1,83 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISPGPE_IP4o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4\ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4\ +| ... | routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets\ +| ... | for correctness and their IPv4 src-addr, dst-addr and\ +| ... | MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv4 LISP testing +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} +| | ... | ${dut1_to_tg_ip4_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISP GPE encap +| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} + +*** Test Cases *** +| tc01-46B-ethip4lispgpe-ip4base-dev +| | [Tags] | 46B +| | frame_size=${46} | phy_cores=${0} diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot new file mode 100644 index 0000000000..402bfbfee2 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot @@ -0,0 +1,85 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\ +| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\ +| ... | routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG(if2). +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in if1 by TG on links to DUT1; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${ot_mode}= | 6to4 +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISPGPE\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv6 LISPoIP4 testing +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISPoTunnel encap +| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} | ${ot_mode} + +*** Test Cases *** +| tc01-62B-ethip4lispgpe-ip6base-dev +| | [Tags] | 62B +| | frame_size=${62} | phy_cores=${0} diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot new file mode 100644 index 0000000000..084f8c694a --- /dev/null +++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot @@ -0,0 +1,84 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip6-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\ +| ... | topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing\ +| ... | over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\ +| ... | configured between DUT1 and TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are\ +| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for\ +| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${ot_mode}= | 4to6 +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv4 LISPoIP6 testing +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISPoTunnel encap +| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc6} | ${dst_rloc6} | ${ot_mode} + +*** Test Cases *** +| tc01-46B-ethip6lispgpe-ip4base-dev +| | [Tags] | 46B +| | frame_size=${46} | phy_cores=${0} diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot new file mode 100644 index 0000000000..e2b74c2730 --- /dev/null +++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot @@ -0,0 +1,83 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP6FWD | LISPGPE_IP6o6 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv6-ICMPv6\ +| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing\ +| ... | over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\ +| ... | configured between DUT1 and TG. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies\ +| ... | packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv6 LISP testing +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} +| | ... | ${dut1_to_tg_ip6_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISP GPE encap +| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc6} | ${dst_rloc6} + +*** Test Cases *** +| tc01-62B-ethip6lispgpe-ip6base-dev +| | [Tags] | 62B +| | frame_size=${62} | phy_cores=${0} diff --git a/tests/vpp/func/ip4_tunnels/__init__.robot b/tests/vpp/func/ip4_tunnels/__init__.robot deleted file mode 100644 index 501a130d68..0000000000 --- a/tests/vpp/func/ip4_tunnels/__init__.robot +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot deleted file mode 100644 index a2d1da3e52..0000000000 --- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot +++ /dev/null @@ -1,129 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -# import additional Lisp settings from resource file -| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IP AFI independent functional tests.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\ -| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv4 tunnel is\ -| ... | configured between DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv4 src-addr,\ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg1] On DUT1 and DUT2 configure IPv4 LISP static adjacencies. -| | ... | [Ver1] Make TG send ICMPv4 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Cfg2] Disable LISP. -| | ... | [Ver2] Verify packets are not received via LISP tunnel. -| | ... | [Cfg3] Re-enable LISP. -| | ... | [Ver3] Verify packets are received again via LISP tunnel. -| | ... | [Ref] RFC6830. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut1_to_dut2_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} -| | ... | ${dut1_to_tg_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${dut2_to_dut1_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_tg} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | And VPP Add IP Neighbor -| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac} -| | When Configure LISP topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | When Disable Lisp | ${dut1_node} -| | Then Packet transmission from port to port should fail -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Packet transmission from port to port should fail -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | When Enable Lisp | ${dut1_node} -| | And Vpp Add Lisp Adjacency | ${dut1_node} -| | ... | ${dut1_to_dut2_ip4_static_adjacency['vni']} -| | ... | ${dut1_to_dut2_ip4_static_adjacency['deid']} -| | ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']} -| | ... | ${dut1_to_dut2_ip4_static_adjacency['seid']} -| | ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']} -| | And Vpp Add Lisp Adjacency | ${dut2_node} -| | ... | ${dut2_to_dut1_ip4_static_adjacency['vni']} -| | ... | ${dut2_to_dut1_ip4_static_adjacency['deid']} -| | ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']} -| | ... | ${dut2_to_dut1_ip4_static_adjacency['seid']} -| | ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']} -| | Then Wait Until Keyword Succeeds | 2x | 5s | Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Wait Until Keyword Succeeds | 2x | 5s | Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot deleted file mode 100644 index adde88ab4f..0000000000 --- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot +++ /dev/null @@ -1,107 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\ -| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} -| | And Add IP Neighbors -| | When Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac} -| | VPP Add IP Neighbor | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} -| | VPP Add IP Neighbor | ${dut2_node} -| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot deleted file mode 100644 index ce8b910854..0000000000 --- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot +++ /dev/null @@ -1,110 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -# import additional Lisp settings from resource file -| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *LISP static adjacency test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured\ -| ... | between DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr,\ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\ -| | ... | packets are correct. -| | ... | [Cfg2] Reconf LISP. -| | ... | [Ver2] Verify packets are received again via LISP tunnel. -| | ... | [Ref] RFC6830. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} -| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_tg} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} -| | And Add IP Neighbors -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} | ${tg_to_dut1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} | ${tg_to_dut2_mac} -| | VPP Add IP Neighbor | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} | ${dut2_to_dut1_mac} -| | VPP Add IP Neighbor | ${dut2_node} -| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/ip6_tunnels/__init__.robot b/tests/vpp/func/ip6_tunnels/__init__.robot deleted file mode 100644 index 501a130d68..0000000000 --- a/tests/vpp/func/ip6_tunnels/__init__.robot +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot deleted file mode 100644 index 06aec5f09a..0000000000 --- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot +++ /dev/null @@ -1,99 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -# import additional Lisp settings from resource file -| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *LISP static adjacency test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4-ICMPv4 on\ -| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6\ -| ... | tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured\ -| ... | between DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv4 src-addr,\ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received\ -| | ... | packets are correct. -| | ... | [Cfg2] Reconf LISP. -| | ... | [Ver2] Verify packets are received again via LISP tunnel. -| | ... | [Ref] RFC6830. -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} -| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_tg} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6} -| | VPP Add IP Neighbor -| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6} | ${tg_to_dut2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6} | ${tg_to_dut1_mac} -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot deleted file mode 100644 index 6b6d2a3311..0000000000 --- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot +++ /dev/null @@ -1,106 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VPPUtil -| ... -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} | ${tg_to_dut1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} | ${tg_to_dut2_mac} -| | VPP Add IP Neighbor | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} | ${dut2_to_dut1_mac} -| | VPP Add IP Neighbor | ${dut2_node} -| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} | ${dut1_to_dut2_mac} -- cgit 1.2.3-korg