From 248d1a52e06622dc9eb1dfdd6ca9f6670b4c0bc3 Mon Sep 17 00:00:00 2001 From: "juraj.linkes" Date: Wed, 10 Jul 2019 11:32:47 +0200 Subject: Refactor VPP Device VM vhost tests * replace the current VM image with kernel img * rework keyword usage to make it consistent with performance tests * remove resources/libraries/robot/shared/qemu.robot as it's not used anywhere anymore Change-Id: Ia5bc19e9e6ed9af031e4d9b5c0c89431fb49fd33 Signed-off-by: juraj.linkes --- tests/dpdk/perf/__init__.robot | 2 +- tests/honeycomb/perf/__init__.robot | 2 +- tests/kubernetes/perf/__init__.robot | 2 +- tests/vpp/device/__init__.robot | 10 +- ...th2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot | 84 +++++++++++++++ .../eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot | 111 ------------------- ...th2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot | 85 +++++++++++++++ .../eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot | 117 --------------------- ...h2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot | 116 -------------------- ...hicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot | 83 +++++++++++++++ .../eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot | 101 ------------------ ...h2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot | 82 +++++++++++++++ tests/vpp/perf/__init__.robot | 6 +- 13 files changed, 344 insertions(+), 457 deletions(-) create mode 100644 tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot delete mode 100644 tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot create mode 100644 tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot delete mode 100644 tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot delete mode 100644 tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot create mode 100644 tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot delete mode 100644 tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot create mode 100644 tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot (limited to 'tests') diff --git a/tests/dpdk/perf/__init__.robot b/tests/dpdk/perf/__init__.robot index d48d5f436d..8010a74503 100644 --- a/tests/dpdk/perf/__init__.robot +++ b/tests/dpdk/perf/__init__.robot @@ -20,7 +20,7 @@ | Suite Setup | Run Keywords | Setup performance global Variables | ... | AND | Setup Framework | ${nodes} | ... | AND | Install DPDK test on all DUTs | ${nodes} -| ... | AND | Get CPU Layout from all nodes | ${nodes} +| ... | AND | Get CPU Info from All Nodes | ${nodes} | ... | AND | Update All Numa Nodes | ... | ${nodes} | skip_tg=${True} | Suite Teardown | Cleanup Framework | ${nodes} diff --git a/tests/honeycomb/perf/__init__.robot b/tests/honeycomb/perf/__init__.robot index dba1392ce6..ce2af61124 100644 --- a/tests/honeycomb/perf/__init__.robot +++ b/tests/honeycomb/perf/__init__.robot @@ -37,7 +37,7 @@ | | ... | for performance testing. | | ... | | Set Global Variable | ${node} -| | Get CPU Layout from all nodes | ${nodes} +| | Get CPU Info from All Nodes | ${nodes} | | ${cores}= | Get Length | ${node['cpuinfo']} | | Set Global Variable | ${cores} | | Stop VPP Service on DUT | ${node} diff --git a/tests/kubernetes/perf/__init__.robot b/tests/kubernetes/perf/__init__.robot index c433cc7b87..790a85be0f 100644 --- a/tests/kubernetes/perf/__init__.robot +++ b/tests/kubernetes/perf/__init__.robot @@ -28,7 +28,7 @@ | ... | AND | Load Docker image on all duts | ${nodes} | ... | ${dcr_image} | ... | AND | Setup Kubernetes on all duts | ${nodes} -| ... | AND | Get CPU Layout from all nodes | ${nodes} +| ... | AND | Get CPU Info from All Nodes | ${nodes} | ... | AND | Update all numa nodes | ${nodes} | ... | skip_tg=${True} | ... | AND | Update NIC interface names on all duts | ${nodes} diff --git a/tests/vpp/device/__init__.robot b/tests/vpp/device/__init__.robot index 69883ea469..c5deb752bb 100644 --- a/tests/vpp/device/__init__.robot +++ b/tests/vpp/device/__init__.robot @@ -21,10 +21,10 @@ | Suite Setup | Run Keywords | Setup Global Variables | ... | AND | Setup Framework | ${nodes} | ... | AND | Setup Corekeeper on All Nodes | ${nodes} -| ... | AND | Install Vpp On All Duts | ${nodes} | ${packages_dir} -| ... | AND | Verify Vpp On All Duts | ${nodes} -| ... | AND | Get CPU Layout from all nodes | ${nodes} -| ... | AND | Update All Interface Data On All Nodes | ${nodes} +| ... | AND | Install Vpp on All Duts | ${nodes} | ${packages_dir} +| ... | AND | Verify Vpp on All Duts | ${nodes} +| ... | AND | Get CPU Info from All Nodes | ${nodes} +| ... | AND | Update All Interface Data on All Nodes | ${nodes} | ... | skip_tg_udev=${True} | numa_node=${True} | ... | Suite Teardown | Cleanup Framework | ${nodes} @@ -36,9 +36,7 @@ | | ... | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - dut_stats - Switch to enable DUT statistics -| | ... | - vm_image - Guest VM disk image. | | ... | - packages_dir - Path to directory where VPP packages are stored. | | ... | | Set Global Variable | ${dut_stats} | ${True} -| | Set Global Variable | ${vm_image} | /var/lib/vm/csit-nested-1.7.img | | Set Global Variable | ${packages_dir} | /tmp/openvpp-testing/download_dir/ diff --git a/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot new file mode 100644 index 0000000000..59da994310 --- /dev/null +++ b/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot @@ -0,0 +1,84 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | BASE | VHOST | 1VM +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv4 routing test cases with vhost user interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \ +| ... | both links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ +| ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \ +| ... | vhost-user interfaces. Guest is running VPP ip4 interconnecting \ +| ... | vhost-user interfaces. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ +| ... | one direction by TG on links to DUT1; on receive TG verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} +| ${tg_if1_ip}= | 10.10.10.2 +| ${tg_if2_ip}= | 20.20.20.2 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | Test uses two VRFs to route IPv4 traffic through two vhost-user \ +| | ... | nterfaces. Both interfaces are configured with IP addresses from \ +| | ... | the same network. The VM is running VPP IPv4 forwarding to pass \ +| | ... | packet from one vhost-user interface to the other one. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv4 forwarding with vhost in 2-node circular topology +| | ... | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} +| | ... | vnf=vpp_chain_ip4_noarp | pinning=${False} +| | Then Send packet and verify headers +| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + +*** Test Cases *** +| tc01-eth2p-ethicmp4-ip4base-eth-2vhost-1vm-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot deleted file mode 100644 index a1a19473b4..0000000000 --- a/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot +++ /dev/null @@ -1,111 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| ... -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | IP4FWD | BASE | ETH | VHOST | 1VM -| ... -| Suite Setup | Setup suite single link -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | vhost -| ... -| Documentation | *IPv4 routing test cases with vhost user interface* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \ -| ... | both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ -| ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \ -| ... | vhost-user interfaces. Guest is configured with linux bridge \ -| ... | interconnecting vhost-user interfaces. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ -| ... | one direction by TG on links to DUT1; on receive TG verifies packets \ -| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so -| ${nic_name}= | virtual -| ${net1}= | 10.0.1.0 -| ${net3}= | 10.0.3.0 -| ${net1_ip1}= | 10.0.1.1 -| ${net1_ip2}= | 10.0.1.2 -| ${net2_ip1}= | 10.0.2.1 -| ${net2_ip2}= | 10.0.2.2 -| ${net3_ip1}= | 10.0.3.1 -| ${net3_ip2}= | 10.0.3.2 -| ${prefix_length}= | 24 -| ${fib_table_2}= | 20 -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| tc01-eth2p-ethip4-ip4base-eth-2vhost-1vm-device -| | [Documentation] -| | ... | Test uses two VRFs to route IPv4 traffic through two vhost-user \ -| | ... | interfaces. Both interfaces are configured with IP addresses from \ -| | ... | the same network. There is created linux bridge on VM to pass packet \ -| | ... | from one vhost-user interface to another one. -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock2} -| | And Set Interface State | ${dut_node} | ${vhost1} | up -| | And Set Interface State | ${dut_node} | ${vhost2} | up -| | And Add Fib Table | ${dut_node} | ${fib_table_2} -| | And Assign Interface To Fib Table | ${dut_node} -| | ... | ${vhost2} | ${fib_table_2} -| | And Assign Interface To Fib Table | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${fib_table_2} -| | And Configure IP addresses on interfaces -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_ip1} | ${prefix_length} -| | ... | ${dut_node} | ${vhost1} | ${net2_ip1} | ${prefix_length} -| | ... | ${dut_node} | ${vhost2} | ${net2_ip2} | ${prefix_length} -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip1} | ${prefix_length} -| | ${vhost2_mac}= | And Get Vhost User Mac By SW Index -| | ... | ${dut_node} | ${vhost2} -| | And Vpp Route Add | ${dut_node} | ${net3} | ${prefix_length} -| | ... | gateway=${net2_ip2} | interface=${vhost1} -| | And Vpp Route Add | ${dut_node} | ${net1} | ${prefix_length} -| | ... | gateway=${net2_ip1} | interface=${vhost2} -| | ... | vrf=${fib_table_2} -| | VPP Add IP Neighbor | ${dut_node} | ${vhost1} | ${net2_ip2} | ${vhost2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip2} | ${tg_to_dut_if2_mac} -| | And Configure VM for vhost L2BD forwarding -| | ... | ${dut_node} | ${sock1} | ${sock2} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${net1_ip2} | ${net3_ip2} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot new file mode 100644 index 0000000000..3e1c103ab0 --- /dev/null +++ b/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot @@ -0,0 +1,85 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | BASE | VHOST | 1VM +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv4 routing test cases with vhost user interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \ +| ... | both links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \ +| ... | vhost-user interfaces. Guest is running VPP ip6 interconnecting \ +| ... | vhost-user interfaces. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \ +| ... | one direction by TG on links to DUT1; on receive TG verifies packets \ +| ... | for correctness and their IPv6 src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} +| ${tg_if1_ip}= | 2001:1::2 +| ${tg_if2_ip}= | 2001:2::2 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | Test uses two VRFs to route IPv6 traffic through two vhost-user \ +| | ... | interfaces. Both interfaces are configured with IP addresses from \ +| | ... | the same network. The VM is running VPP IPv6 forwarding to pass \ +| | ... | packet from one vhost-user interface to the other one. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv6 forwarding with vhost in 2-node circular topology +| | ... | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_ip6 +| | ... | pinning=${False} +| | Then Send packet and verify headers +| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + + +*** Test Cases *** +| tc01-eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot deleted file mode 100644 index f125bba035..0000000000 --- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot +++ /dev/null @@ -1,117 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| ... -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | IP6FWD | BASE | ETH | VHOST | 1VM -| ... -| Suite Setup | Setup suite single link -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | vhost -| ... -| Documentation | *IPv4 routing test cases with vhost user interface* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \ -| ... | both links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ -| ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \ -| ... | vhost-user interfaces. Guest is configured with linux bridge \ -| ... | interconnecting vhost-user interfaces. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \ -| ... | one direction by TG on links to DUT1; on receive TG verifies packets \ -| ... | for correctness and their IPv6 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so -| ${nic_name}= | virtual -| ${net1}= | 2001:1::0 -| ${net3}= | 2001:3::0 -| ${net1_ip1}= | 2001:1::1 -| ${net1_ip2}= | 2001:1::2 -| ${net2_ip1}= | 2001:2::1 -| ${net2_ip2}= | 2001:2::2 -| ${net3_ip1}= | 2001:3::1 -| ${net3_ip2}= | 2001:3::2 -| ${prefix_length}= | 64 -| ${fib_table_2}= | 20 -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| tc01-eth2p-ethip6-ip6base-eth-2vhost-1vm-device -| | [Documentation] -| | ... | Test uses two VRFs to route IPv6 traffic through two vhost-user \ -| | ... | interfaces. Both interfaces are configured with IP addresses from \ -| | ... | the same network. There is created linux bridge on VM to pass packet \ -| | ... | from one vhost-user interface to another one. -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock2} -| | And Set Interface State | ${dut_node} | ${vhost1} | up -| | And Set Interface State | ${dut_node} | ${vhost2} | up -| | And Add Fib Table | ${dut_node} | ${fib_table_2} | ipv6=${True} -| | And Assign Interface To Fib Table -| | ... | ${dut_node} | ${vhost2} | ${fib_table_2} | ipv6=${True} -| | And Assign Interface To Fib Table -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${fib_table_2} | ipv6=${True} -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_ip1} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${vhost1} | ${net2_ip1} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${vhost2} | ${net2_ip2} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip1} | ${prefix_length} -| | And Suppress ICMPv6 router advertisement message | ${nodes} -| | ${vhost2_mac}= | And Get Vhost User Mac By SW Index -| | ... | ${dut_node} | ${vhost2} -| | And Vpp Route Add -| | ... | ${dut_node} | ${net3} | ${prefix_length} -| | ... | gateway=${net2_ip2} | interface=${vhost1} -| | And Vpp Route Add -| | ... | ${dut_node} | ${net1} | ${prefix_length} -| | ... | gateway=${net2_ip1} | interface=${vhost2} | vrf=${fib_table_2} -| | VPP Add IP Neighbor -| | ... | ${dut_node} | ${vhost1} | ${net2_ip2} | ${vhost2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip2} | ${tg_to_dut_if2_mac} -| | And Configure VM for vhost L2BD forwarding -| | ... | ${dut_node} | ${sock1} | ${sock2} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${net1_ip2} | ${net3_ip2} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac} diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot deleted file mode 100644 index 2a821a72c7..0000000000 --- a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot +++ /dev/null @@ -1,116 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | VHOST | 1VM -| ... -| Suite Setup | Setup suite single link -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | vhost -| ... -| Documentation | *L2 bridge-domain test cases with vhost user interface* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ -| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ -| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ -| ... | configured with linux bridge interconnecting vhost-user interfaces. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \ -| ... | are sent in both directions by TG on links to DUT1 via VM; on \ -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) \ -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so -| ${nic_name}= | virtual -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| tc01-eth2p-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \ -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \ -| | ... | switched thru DUT1 and VM in both directions and are correct on \ -| | ... | receive. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| tc02-eth2p-ethip6-l2bdbasemaclrn-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \ -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are \ -| | ... | switched thru DUT1 and VM in both directions and are correct on \ -| | ... | receive. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot new file mode 100644 index 0000000000..8170466742 --- /dev/null +++ b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot @@ -0,0 +1,83 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP | VHOST | 1VM +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *L2 bridge-domain test cases with vhost user interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ +| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ +| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ +| ... | configured with VPP l2 cross-connect interconnecting vhost-user \ +| ... | interfaces. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ +| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \ +| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \ +| ... | addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ +| | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \ +| | ... | two virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \ +| | ... | switched thru DUT1 and VM in both directions and are correct on \ +| | ... | receive. [Ref] +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize L2 bridge domains with Vhost-User | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc +| | ... | pinning=${False} +| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg} +| | ... | ${tg_if1} | ${tg_if2} + +*** Test Cases *** +| tc01-eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot deleted file mode 100644 index a820bd2cbb..0000000000 --- a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot +++ /dev/null @@ -1,101 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.NodePath -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | L2XCFWD | BASE | ETH | VHOST | 1VM -| ... -| Suite Setup | Setup suite single link -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | vhost -| ... -| Documentation | *L2 cross-connect test cases with vhost user interface* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ -| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \ -| ... | interfaces. Guest is configured with linux bridge interconnecting \ -| ... | vhost-user interfaces. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \ -| ... | are sent in both directions by TG on links to DUT1 via VM; on receive \ -| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr, \ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so -| ${nic_name}= | virtual -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| tc01-eth2p-ethip4-l2xcbase-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \ -| | ... | two L2 cross-connects (L2XC), each with one untagged interface \ -| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \ -| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \ -| | ... | i/fs to be switched by DUT to and from VM; verify all packets \ -| | ... | are received. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} | ${sock2} -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | And Get Vhost dump | ${dut_node} - -| tc02-eth2p-ethip6-l2xcbase-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \ -| | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG \ -| | ... | and untagged i/f to local VM over vhost-user. [Ver] Make TG send \ -| | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to \ -| | ... | be switched by DUT to and from VM; verify all packets are \ -| | ... | received. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} | ${sock2} -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} -| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot new file mode 100644 index 0000000000..c5c6ab7ae6 --- /dev/null +++ b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot @@ -0,0 +1,82 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | VHOST | 1VM +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *L2 cross-connect test cases with vhost user interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \ +| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \ +| ... | interfaces. Guest is configured with VPP l2 cross-connect \ +| ... | interconnecting vhost-user interfaces. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ +| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \ +| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \ +| ... | addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \ +| | ... | two L2 cross-connects (L2XC), each with one untagged interface \ +| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \ +| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \ +| | ... | i/fs to be switched by DUT to and from VM; verify all packets \ +| | ... | are received. [Ref] +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc +| | ... | pinning=${False} +| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg} +| | ... | ${tg_if1} | ${tg_if2} + +*** Test Cases *** +| tc01-eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/perf/__init__.robot b/tests/vpp/perf/__init__.robot index d86a76db79..a54249bf1a 100644 --- a/tests/vpp/perf/__init__.robot +++ b/tests/vpp/perf/__init__.robot @@ -18,21 +18,21 @@ | Library | resources.libraries.python.SetupFramework.CleanupFramework | Library | resources.libraries.python.CpuUtils | ... -| Suite Setup | Run Keywords | Setup performance global Variables +| Suite Setup | Run Keywords | Setup Global Variables | ... | AND | Setup Framework | ${nodes} | ... | AND | Setup Corekeeper on All Nodes | ${nodes} | ... | AND | Install Vpp on All Duts | ${nodes} | ${packages_dir} | ... | AND | Verify Vpp on All Duts | ${nodes} | ... | AND | Verify UIO Driver on all DUTs | ${nodes} | ... | AND | Show Vpp Version on All Duts | ${nodes} -| ... | AND | Get CPU Layout from All nodes | ${nodes} +| ... | AND | Get CPU Info from All Nodes | ${nodes} | ... | AND | Update All Interface Data on All Nodes | ${nodes} | ... | skip_tg=${True} | numa_node=${True} | ... | Suite Teardown | Cleanup Framework | ${nodes} *** Keywords *** -| Setup performance global Variables +| Setup Global Variables | | [Documentation] | | ... | Setup suite Variables. Variables are used across performance testing. | | ... -- cgit 1.2.3-korg