From 2732350ff44a68fe34d7703682ea9339944f1459 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 7 Jun 2019 09:45:41 +0000 Subject: Add scale ipsec tunnel tests - 5K - 10K Change-Id: Iaa2c77d07c3686e09fe327c663d7d7fc42024034 Signed-off-by: Peter Mikus --- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 9 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 9 +- ...secbasetnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 12 +- ...secbasetnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 12 +- ...w-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot | 11 +- ...w-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot | 11 +- ...secbasetnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot | 14 +- ...secbasetnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 151 +++++++++++++++++++++ ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 151 +++++++++++++++++++++ ...le10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 151 +++++++++++++++++++++ ...le10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 151 +++++++++++++++++++++ ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 9 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 9 +- ...ale1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 12 +- ...ale1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 12 +- ...w-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot | 11 +- ...w-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot | 11 +- ...ale1000tnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot | 14 +- ...ale1000tnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 9 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 9 +- ...cale100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 12 +- ...cale100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 12 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 9 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 9 +- ...scale40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 12 +- ...scale40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 12 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 9 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 9 +- ...cscale4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 12 +- ...cscale4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 12 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 151 +++++++++++++++++++++ ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 151 +++++++++++++++++++++ ...ale5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 151 +++++++++++++++++++++ ...ale5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 151 +++++++++++++++++++++ 36 files changed, 1300 insertions(+), 218 deletions(-) create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot create mode 100644 tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot (limited to 'tests') diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 5cd3291bc1..546d3eff39 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 1d1dcb2331..a6f9ec5ae0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 3915452a55..7a2f0e92e3 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg} = | Crypto Alg AES GCM 128 | | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 6a7ebdff26..ed4637ead7 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg} = | Crypto Alg AES GCM 256 | | ${auth_alg} = | Integ Alg AES GCM 256 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot index 711ed8e887..87e2148778 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -95,9 +94,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot index e706cd2cbf..2996130be2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -95,9 +94,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot index 2d47f5c4e0..c50632f94a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -92,16 +91,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot index 0e77df9377..399db3e606 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -92,16 +91,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..e591bf0d4c --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..bae9b2ae7c --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..4047681a91 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_GCM | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..c05454046b --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Integ Alg AES GCM 256 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale10000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 3dd482679b..7b17770965 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 92e3bd645a..94c29325af 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 837c827b84..8934144a25 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 3dab350d82..7ea120ee1f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot index 526b3526ba..c90d8c9f0d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac256sha-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -95,9 +94,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot index 90f6f3b71b..1952ecb575 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128cbc-hmac512sha-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -95,9 +94,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot index 96af3efb04..9cc03ab833 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes128gcm-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -92,16 +91,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot index 74c8e2e778..ff0bafe4c8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes256gcm-ndrpdr.robot @@ -34,10 +34,9 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ @@ -92,16 +91,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index a2d07b5682..4030c86674 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index eef1ff6eb1..55c97585f4 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index a57edc6eab..590b2336a8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 82237264b9..63ece57db5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index cd0c00ee8e..64b463f839 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index e784afa2a5..274c9a28e2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 12d5651d6c..642132d6d0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 0e8c902f59..9ee1e3200d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 40b6c1938e..f309a5e1e5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index fa42af9c25..ea61557d44 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -93,9 +92,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 236e343657..cd7e2b8a28 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index dae4dd180e..21d105d2c5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -35,9 +35,8 @@ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, | ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ | ... | and send to another DUT, where packets are decrypted and sent back to TG | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ @@ -90,16 +89,11 @@ | | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg}= | Crypto Alg AES GCM 256 | | ${auth_alg}= | Integ Alg AES GCM 256 -| | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..0fd1a16859 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..f9cffb716d --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..59bad65a47 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_GCM | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..7403bc86cf --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES +| ... +| Suite Setup | Run Keywords +| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev +| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Integ Alg AES GCM 256 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} +| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsecscale5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} -- cgit 1.2.3-korg