From 81184fdb8f4ec8668bd7b0c8a703891d95095192 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 3 Aug 2018 14:27:55 +0000 Subject: CSIT-1156 Create container memif tests for 2-node topology CSIT-1155 Implement container memif KWs for 2-node topology Change-Id: I4fc7bcab499a0b8a8594114d3f331b0d9610bf9d Signed-off-by: Peter Mikus --- ...20-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot | 2 +- ...eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot | 2 +- ...e2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot | 2 +- ...1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot | 2 +- ...e2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot | 2 +- ...1x520-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 2 +- ...e2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot | 2 +- ...1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot | 2 +- ...10-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot | 2 +- ...eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot | 2 +- ...e2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot | 2 +- ...1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot | 2 +- ...e2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot | 2 +- ...1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 2 +- ...e2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot | 2 +- ...1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot | 2 +- ...10-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot | 143 +++++++++++++++++++ ...eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot | 149 ++++++++++++++++++++ ...e2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot | 143 +++++++++++++++++++ ...1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 149 ++++++++++++++++++++ ...10-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot | 145 ++++++++++++++++++++ ...eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot | 151 +++++++++++++++++++++ ...p1xxv710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot | 145 ++++++++++++++++++++ ...xv710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 151 +++++++++++++++++++++ ...10-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot | 8 +- ...eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot | 10 +- ...2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot | 8 +- ...xl710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot | 10 +- 28 files changed, 1210 insertions(+), 34 deletions(-) create mode 100644 tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot create mode 100644 tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot (limited to 'tests') diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index c36d94efee..69c4ebc6ef 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -89,7 +89,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index 36b781168d..b4ef1864ea 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -95,7 +95,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index c7486bdefb..229abd3ded 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -93,7 +93,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | And Initialize L2 xconnect for single memif | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot index 874519f947..93cf44b4fe 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot @@ -99,7 +99,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | And Initialize L2 xconnect for single memif | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index 2da7acbe5e..f8cc4c48e7 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -89,7 +89,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index 1ac118914f..c777fc4235 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -95,7 +95,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index c369ffcd2a..5b84f2a63d 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -88,7 +88,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index 93d1229e5c..fa5e2caea7 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -89,7 +89,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 2acb126a4f..00e363421e 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -89,7 +89,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index 3688675b4a..df051fe269 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -95,7 +95,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index ce98b91c3e..02b8ac4613 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -92,7 +92,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | And Initialize L2 xconnect for single memif | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot index 4aea0546fd..9f1ad56ba3 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot @@ -98,7 +98,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for single memif in 3-node circular topology +| | And Initialize L2 xconnect for single memif | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index 2a814bde07..d27934033b 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -89,7 +89,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index 38b9598688..9c13c3495e 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -95,7 +95,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 29926bcfc4..dacb7d9349 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -88,7 +88,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index 10ed0c2fd9..14a7502821 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -94,7 +94,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot new file mode 100644 index 0000000000..982142d9f8 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot @@ -0,0 +1,143 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 Bridge Domain with memif pairs +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..a232b060e7 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -0,0 +1,149 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 Bridge Domain with memif pairs +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot new file mode 100644 index 0000000000..0d160d8da0 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -0,0 +1,143 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. +| ... | DUT1 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect with memif pairs +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..b56fc9bbf6 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -0,0 +1,149 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-X710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. +| ... | DUT1 tested with 2p10GE NIC X710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect with memif pairs +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot new file mode 100644 index 0000000000..5c1e43a48e --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr.robot @@ -0,0 +1,145 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-XXV710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-XXV710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with 2p25GE NIC XXV710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 Bridge Domain with memif pairs +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..610e0608b3 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-XXV710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-XXV710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with 2p25GE NIC XXV710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 Bridge Domain with memif pairs +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot new file mode 100644 index 0000000000..7edfa148c5 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -0,0 +1,145 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-XXV710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-XXV710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. +| ... | DUT1 tested with 2p25GE NIC XXV710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect with memif pairs +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2xcbase-eth-2memif-1dcr-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..3019c509a5 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-25ge2p1xxv710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-XXV710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L2 +| ... | Intel-XXV710 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 2-node performance topology with container +| ... +| Test Setup | Run Keywords +| ... | Set up performance test +| ... | AND | Restart VPP in all 'VNF' containers +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. +| ... | DUT1 tested with 2p25GE NIC XXV710 by Intel. +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | Docker +| ${container_image}= | ubuntu:xenial-20180412 +| ${container_install_dkms}= | ${FALSE} +| ${container_chain_topology}= | chain +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | And Initialize L2 xconnect with memif pairs +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index a2a5ea0c66..4d64e07fcb 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -54,11 +54,11 @@ *** Variables *** # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} +| ${s_24.5G}= | ${24500000000} # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} +| ${s_18.75Mpps}= | ${18750000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 # LXC container | ${container_count}= | ${1} | ${container_engine}= | LXC @@ -91,7 +91,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index 4abd28bea5..8d1d8cad34 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -46,7 +46,7 @@ | ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with | ... | 2p40GE NIC XL710 by Intel. | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. @@ -58,11 +58,11 @@ *** Variables *** # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} +| ${s_24.5G}= | ${24500000000} # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} +| ${s_18.75Mpps}= | ${18750000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 # LXC container | ${container_count}= | ${1} | ${container_engine}= | LXC @@ -97,7 +97,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | And Initialize L2 Bridge Domain with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 8e01e1a6f9..efe1fc620d 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -53,11 +53,11 @@ *** Variables *** # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} +| ${s_24.5G}= | ${24500000000} # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} +| ${s_18.75Mpps}= | ${18750000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 # LXC container | ${container_count}= | ${1} | ${container_engine}= | LXC @@ -90,7 +90,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index e44af2d813..548fac214d 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -45,7 +45,7 @@ | ... | version as running on DUT. LXC is limited via cgroup to use 3 cores | ... | allocated from pool of isolated CPUs. There are no memory contraints. | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. @@ -57,11 +57,11 @@ *** Variables *** # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} +| ${s_24.5G}= | ${24500000000} # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} +| ${s_18.75Mpps}= | ${18750000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 # LXC container | ${container_count}= | ${1} | ${container_engine}= | LXC @@ -96,7 +96,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology +| | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} -- cgit 1.2.3-korg