From 97e93cd29f1a9c01b139e2d7fcc745d37d4bd944 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Mon, 29 Jul 2019 12:36:18 +0000 Subject: Add: Dot1Q + L2BD + GBP Change-Id: I0050f715011ecfa92b3ee88b301809a56abb7946 Signed-off-by: Peter Mikus --- ...1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot | 140 +++++++++++++++++++++ ...l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot | 4 +- 2 files changed, 142 insertions(+), 2 deletions(-) create mode 100644 tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot (limited to 'tests') diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot new file mode 100644 index 0000000000..bcf5764c21 --- /dev/null +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot @@ -0,0 +1,140 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP +| ... +| Suite Setup | Setup suite single link | performance_avf +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance +| ... +| Test Template | Local template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and GBP test +| ... | cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 . +| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\ +| ... | 2 VLAN subinterfaces (VID 200 and 300),\ +| ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\ +| ... | 1 GBP L3 RD,\ +| ... | 1 GBP L2 BD with the L2 BD,\ +| ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\ +| ... | 2 GBP external EP in EPG-1,\ +| ... | 2 external subnets with sclass 200 and 300,\ +| ... | Contracts allowing full communications between the 2 external subnets.\ +| ... | DUT1 tested with ${nic_name} with VF enabled. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUT. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header including IEEE 802.1Q tagging, IPv4 header\ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so | gbp_plugin.so +| ... | acl_plugin.so +| ${osi_layer}= | L2 +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD with VLAN and GBP config with ${phy_cores}\ +| | ... | physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add DPDK no PCI to all DUTs +| | And Set Max Rate And Jumbo +| | And Apply startup configuration on all VPP DUTs +| | When Initialize AVF interfaces +| | And Initialize layer interface +| | And Initialize layer dot1q +| | And Initialize GBP routing domains +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 7045b35b42..2a54da47a5 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -28,8 +28,8 @@ | ... | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ | ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ | ... | and MAC learning enabled. DUT1 is tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -- cgit 1.2.3-korg