From f94e16167519c74707ec8b606da3f7b97c749c66 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 13 May 2016 09:57:03 +0200 Subject: Find PDR using binary search - JIRA: CSIT-72 - modify libraries for PDR search evaluation - write robot framework keywords for PDR search - write Performance Test Cases using PDR Change-Id: Id06a2a7f78fe8626c221afe4178c5c30cc599762 Signed-off-by: Peter Mikus --- .../Long_Bridge_Domain_Intel-X520-DA2.robot | 232 ++++++++++++++- .../performance/Long_IPv4_Intel-X520-DA2.robot | 230 ++++++++++++++- .../performance/Long_IPv6_Intel-X520-DA2.robot | 232 ++++++++++++++- .../Long_Xconnect_Dot1q_Intel-X520-DA2.robot | 319 ++++++++++++++++++++- .../performance/Long_Xconnect_Intel-X520-DA2.robot | 230 ++++++++++++++- .../Short_Bridge_Domain_Intel-X520-DA2.robot | 37 +-- .../performance/Short_IPv4_Intel-X520-DA2.robot | 37 +-- .../performance/Short_IPv6_Intel-X520-DA2.robot | 37 +-- .../Short_Xconnect_Dot1q_Intel-X520-DA2.robot | 18 +- .../Short_Xconnect_Intel-X520-DA2.robot | 37 +-- 10 files changed, 1280 insertions(+), 129 deletions(-) (limited to 'tests') diff --git a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot index 78b873cf5c..710c01e8f6 100644 --- a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot @@ -34,7 +34,7 @@ | | [Documentation] | | ... | Find throughput with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -51,11 +51,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | binary search with threshold 10,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -72,11 +96,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | binary search with threshold of 5,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -92,11 +140,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 9000B frames by using +| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -113,11 +184,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by +| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 1518B frames by | | ... | using binary search with threshold 10,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -134,11 +229,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 9000B frames by | | ... | using binary search with threshold 5,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -154,11 +273,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B | | ... | frames by using binary search with threshold 0.1Mpps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -175,11 +317,36 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 64B +| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance +| | ... | is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B | | ... | frames by using binary search with threshold 10,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -196,11 +363,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B | | ... | frames by using binary search with threshold 5,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -216,3 +407,26 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + diff --git a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot index d80dd5b7d3..90b3abd0d9 100644 --- a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot @@ -38,7 +38,7 @@ | | [Documentation] | | ... | Find throughput with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -55,11 +55,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | binary search with threshold 10,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -76,11 +100,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | binary search with threshold 5,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -96,11 +144,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 9000B frames by using +| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -117,11 +188,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by +| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 1518B frames by | | ... | using binary search with threshold 10,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -138,11 +233,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 9000B frames by | | ... | using binary search with threshold 5,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -158,11 +277,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B | | ... | frames by using binary search with threshold 0.1Mpps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -179,11 +321,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 64B +| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance +| | ... | is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B | | ... | frames by using binary search with threshold 10,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -200,11 +366,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B | | ... | frames by using binary search with threshold 5,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -220,3 +410,25 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} diff --git a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot index 0a45796425..a09153c278 100644 --- a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot @@ -33,7 +33,7 @@ | | [Documentation] | | ... | Find throughput with non drop rate for 78B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} @@ -50,11 +50,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 78B frames by using +| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 78 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | binary search with threshold 10,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -71,11 +95,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | binary search with threshold 5,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -91,11 +139,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 9000B frames by using +| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 78B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} @@ -112,11 +183,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 78 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 1518B frames by | | ... | using binary search with threshold 10,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -133,11 +228,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 9000B frames by | | ... | using binary search with threshold 5,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -153,11 +272,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 78B | | ... | frames by using binary search with threshold 0.1Mpps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} @@ -174,11 +316,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 78B +| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance +| | ... | is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 78 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B | | ... | frames by using binary search with threshold 10,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -195,12 +361,36 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B | | ... | frames by using linear search starting at 138,580pps, stepping down -| | ... | with step of 5,000pps -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | with step of 5,000pps. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -216,3 +406,25 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv6 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} diff --git a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot index 76dd5a10a9..d13c707c56 100644 --- a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot @@ -40,7 +40,7 @@ | | ... | Find throughput with non drop rate by using binary search with | | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is | | ... | applied between DUTs inserting 4B VLAN ID into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} @@ -65,12 +65,45 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find NDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find PDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate by using binary search with +| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate by using binary search with | | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is | | ... | applied between DUTs inserting 4B VLAN ID into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} @@ -95,12 +128,45 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate by using binary search with +| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput with non drop rate by using binary searchwith +| | ... | Find throughput with non drop rate by using binary search with | | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is | | ... | applied between DUTs inserting 4B VLAN ID into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} @@ -124,12 +190,44 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate by using binary search with +| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate by using binary search | | ... | with threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging | | ... | is applied between DUTs inserting 4B VLAN ID into a packet header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} @@ -154,13 +252,46 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate by using binary +| | ... | search with threshold 0.1Mpps. Frames from and to TG are 64B long. +| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet +| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate by using binary search | | ... | with threshold 10,000pps. Frames from and to TG are 1518B long. | | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet | | ... | header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} @@ -185,13 +316,46 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate by using binary +| | ... | search with threshold 10,000pps. Frames from and to TG are 1518B long. +| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet +| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate by using binary search | | ... | with threshold 5,000pps. Frames from and to TG are 9000B long. | | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet | | ... | header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} @@ -215,13 +379,45 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate by using binary +| | ... | search with threshold 5,000pps. Frames from and to TG are 9000B long. +| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet +| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using | | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B | | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a | | ... | packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} @@ -246,13 +442,47 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate by using +| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B +| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a +| | ... | packet header. Loss acceptance is set to 0.5 percent of transmitted +| | ... | packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using | | ... | binary search with threshold 10,000pps. Frames from and to TG are | | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into | | ... | a packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} @@ -277,13 +507,47 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate by using +| | ... | binary search with threshold 10,000pps. Frames from and to TG are +| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into +| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted +| | ... | packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using | | ... | binary search with threshold 5,000pps. Frames from and to TG are | | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into | | ... | a packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} @@ -306,3 +570,36 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} + +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate by using +| | ... | binary search with threshold 5,000pps. Frames from and to TG are +| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into +| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted +| | ... | packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} diff --git a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot index 946b13a1d6..0c382df212 100644 --- a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot @@ -35,7 +35,7 @@ | | [Documentation] | | ... | Find throughput with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -52,11 +52,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | binary search with threshold 10,000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -73,11 +97,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | binary search with threshold 5000pps. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -93,11 +141,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 9000B frames by using +| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | binary search with threshold 0.1Mpps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -114,11 +185,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by +| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 1518B frames by | | ... | using binary search with threshold 10,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -135,11 +230,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 2 cores with non drop rate for 9000B frames by | | ... | using binary search with threshold 5,000pps. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -155,11 +274,34 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B | | ... | frames by using binary search with threshold 0.1Mpps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} @@ -176,11 +318,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 64B +| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance +| | ... | is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B | | ... | frames by using binary search with threshold 10,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} @@ -197,11 +363,35 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + | Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B frames by | | ... | using binary search with threshold 5,000pps. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} @@ -217,3 +407,25 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} diff --git a/tests/suites/performance/Short_Bridge_Domain_Intel-X520-DA2.robot b/tests/suites/performance/Short_Bridge_Domain_Intel-X520-DA2.robot index 434a3d08a9..1b8ec45e88 100644 --- a/tests/suites/performance/Short_Bridge_Domain_Intel-X520-DA2.robot +++ b/tests/suites/performance/Short_Bridge_Domain_Intel-X520-DA2.robot @@ -10,6 +10,7 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. + *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath @@ -26,8 +27,8 @@ | 1core VPP passes 64B frames through bridge domain at 2x 3.2Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through bridge domain -| | ... | at 2x 3.2Mpps in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 3.2Mpps in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.2mpps @@ -42,8 +43,8 @@ | 1core VPP passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through bridge domain -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -58,8 +59,8 @@ | 1core VPP passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through bridge domain -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -73,8 +74,8 @@ | 2core VPP with rss 1 passes 64B frames through bridge domain at 2x 6.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through bridge domain -| | ... | at 2x 6.9Mpps in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 6.9Mpps in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 6.9mpps @@ -89,8 +90,8 @@ | 2core VPP with rss 1 passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 1518B frames through bridge domain -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -105,8 +106,8 @@ | 2core VPP with rss 1 passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 9000B frames through bridge domain -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -120,8 +121,8 @@ | 4core VPP with rss 2 passes 64B frames through bridge domain at 2x 7.4Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through bridge -| | ... | domain at 2x7.4Mpps in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | domain at 2x7.4Mpps in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.4mpps @@ -136,8 +137,8 @@ | 4core VPP with rss 2 passes 1518B frames through bridge domain at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 1518B frames through bridge -| | ... | domain at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | domain at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -152,8 +153,8 @@ | 4core VPP with rss 2 passes 9000B frames through bridge domain at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2should pass 9000B frames through bridge -| | ... | domain at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | domain at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps diff --git a/tests/suites/performance/Short_IPv4_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv4_Intel-X520-DA2.robot index bd39ae7f26..f29e51909b 100644 --- a/tests/suites/performance/Short_IPv4_Intel-X520-DA2.robot +++ b/tests/suites/performance/Short_IPv4_Intel-X520-DA2.robot @@ -10,6 +10,7 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. + *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.topology.Topology @@ -30,8 +31,8 @@ | 1core VPP passes 64B frames through IPv4 forwarding at 2x 3.5Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through IPv4 forwarding -| | ... | at 2x 3.5Mpps in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 3.5Mpps in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps @@ -46,8 +47,8 @@ | 1core VPP passes 1518B frames through IPv4 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through IPv4 forwarding -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -62,8 +63,8 @@ | 1core VPP passes 9000B frames through IPv4 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through IPv4 forwarding -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -77,8 +78,8 @@ | 2core VPP with rss 1 passes 64B frames through IPv4 forwarding at 2x 7.5Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through IPv4 forwarding -| | ... | at 2x 7.5Mpps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 7.5Mpps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.5mpps @@ -93,8 +94,8 @@ | 2core VPP with rss 1 passes 1518B frames through IPv4 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 1518B frames through IPv4 forwarding -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -109,8 +110,8 @@ | 2core VPP with rss 1 passes 9000B frames through IPv4 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 9000B frames through IPv4 forwarding -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -124,8 +125,8 @@ | 4core VPP with rss 2 passes 64B frames through IPv4 forwarding at 2x 7.8Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through IPv4 -| | ... | forwarding at 2x 7.8Mpps in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x 7.8Mpps in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.8mpps @@ -140,8 +141,8 @@ | 4core VPP with rss 2 passes 1518B frames through IPv4 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 1518B frames through IPv4 -| | ... | forwarding at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -156,8 +157,8 @@ | 4core VPP with rss 2 passes 9000B frames through IPv4 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 9000B frames through IPv4 -| | ... | forwarding at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps diff --git a/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot index ad75aaefee..18e425bf1d 100644 --- a/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot +++ b/tests/suites/performance/Short_IPv6_Intel-X520-DA2.robot @@ -10,6 +10,7 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. + *** Settings *** | Resource | resources/libraries/robot/performance.robot | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT @@ -26,8 +27,8 @@ | 1core VPP passes 78B frames through IPv6 forwarding at 2x 2.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 78B frames through IPv6 forwarding -| | ... | at 2x2.9Mpps in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x2.9Mpps in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps @@ -42,8 +43,8 @@ | 1core VPP passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through IPv6 forwarding -| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -58,8 +59,8 @@ | 1core VPP passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through IPv6 forwarding -| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -73,8 +74,8 @@ | 2core VPP with rss 1 passes 78B frames through IPv6 forwarding at 2x 5.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 78B frames through IPv6 forwarding -| | ... | at 2x5.9Mpps in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x5.9Mpps in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.9mpps @@ -89,8 +90,8 @@ | 2core VPP with rss 1 passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 1518B frames through IPv6 forwarding -| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -105,8 +106,8 @@ | 2core VPP with rss 1 passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 9000B frames through IPv6 forwarding -| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -120,8 +121,8 @@ | 4core VPP with rss 2 passes 78B frames through IPv6 forwarding at 2x 7.3Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 78B frames through IPv6 -| | ... | forwarding at 2x7.3Mpps in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x7.3Mpps in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.3mpps @@ -136,8 +137,8 @@ | 4core VPP with rss 2 passes 1518B frames through IPv6 forwarding at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 1518B frames through IPv6 -| | ... | forwarding at 2x812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -152,8 +153,8 @@ | 4core VPP with rss 2 passes 9000B frames through IPv6 forwarding at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 9000B frames through IPv6 -| | ... | forwarding at 2x138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | forwarding at 2x138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps diff --git a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot index 71695c64bd..4f68d87d2f 100644 --- a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot +++ b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot @@ -34,7 +34,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at 2x2.9Mpps in | | ... | 3-node topology. Tagging is applied between DUTs inserting 4B VLAN ID | | ... | into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps @@ -60,7 +60,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 720,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps @@ -86,7 +86,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 120,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps @@ -111,7 +111,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at 2x5.8Mpps in | | ... | 3-node topology. Tagging is applied between DUTs inserting 4B VLAN ID | | ... | into a packet header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.8mpps @@ -137,7 +137,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 720,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps @@ -163,7 +163,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 120,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps @@ -188,7 +188,7 @@ | | ... | sub-interfaces inter-connected using L2 cross connect at 2x9.0Mpps in | | ... | 3-node topology. Tagging is applied between DUTs inserting 4B VLAN ID | | ... | into a packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 9.0mpps @@ -214,7 +214,7 @@ | | ... | dot1q sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 720,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps @@ -240,7 +240,7 @@ | | ... | dot1q sub-interfaces inter-connected using L2 cross connect at | | ... | 2x 120,000pps in 3-node topology. Tagging is applied between DUTs | | ... | inserting 4B VLAN ID into a packet header. -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps diff --git a/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot b/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot index 4c8d38bf40..b716925a8b 100644 --- a/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot +++ b/tests/suites/performance/Short_Xconnect_Intel-X520-DA2.robot @@ -10,6 +10,7 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. + *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.InterfaceUtil @@ -27,8 +28,8 @@ | 1core VPP passes 64B frames through L2 cross connect at 2x 3.6Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through L2 cross connect -| | ... | at 2x3.6Mpps in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x3.6Mpps in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.6mpps @@ -43,8 +44,8 @@ | 1core VPP passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through L2 cross connect -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -59,8 +60,8 @@ | 1core VPP passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through L2 cross connect -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -74,8 +75,8 @@ | 2core VPP with rss 1 passes 64B frames through L2 cross connect at 2x 8.3Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through L2 cross connect -| | ... | at 2x 8.3Mpps in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 8.3Mpps in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 8.3mpps @@ -90,8 +91,8 @@ | 2core VPP with rss 1 passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 1518B frames through L2 cross connect -| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -106,8 +107,8 @@ | 2core VPP with rss 1 passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 9000B frames through L2 cross connect -| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps @@ -121,8 +122,8 @@ | 4core VPP with rss 2 passes 64B frames through L2 cross connect at 2x 9.3Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through L2 cross -| | ... | connect at 2x9.3Mpps in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | connect at 2x9.3Mpps in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 9.3mpps @@ -137,8 +138,8 @@ | 4core VPP with rss 2 passes 1518B frames through L2 cross connect at 2x 812,743pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 1518B frames through L2 cross -| | ... | connect at 2x 812,743pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | connect at 2x 812,743pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps @@ -153,8 +154,8 @@ | 4core VPP with rss 2 passes 9000B frames through L2 cross connect at 2x 138,580pps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 9000B frames through L2 cross -| | ... | connect at 2x 138,580pps (2x 10Gbps) in 3-node topology -| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ... | connect at 2x 138,580pps (2x 10Gbps) in 3-node topology. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps -- cgit 1.2.3-korg