#!/bin/bash # Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. set -x cat /etc/hostname cat /etc/hosts sudo yum install -y python-devel python-virtualenv VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") VIRL_USERNAME=jenkins-in VIRL_PKEY=priv_key VIRL_SERVER_STATUS_FILE="status" VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" VIRL_TOPOLOGY=double-ring-nested.centos7 VIRL_RELEASE=csit-centos-7.3-1611_2017-02-20_1.3 SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" TEST_GROUPS=("l2bd,dhcp,gre,honeycomb,l2xc,lisp,softwire" "cop,telemetry,ipsec,ipv6,rpf,tap,vrf" "fds,iacl,ipv4,policer,vlan,vxlan") SUITE_PATH="tests.func" SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" # Create tmp dir mkdir ${SCRIPT_DIR}/tmp # Use tmp dir to store log files LOG_PATH="${SCRIPT_DIR}/tmp" # Use tmp dir for tarballs export TMPDIR="${SCRIPT_DIR}/tmp" SHARED_MEMORY_PATH="/dev/shm" function ssh_do() { echo echo "### " ssh $@ ssh ${SSH_OPTIONS} $@ } rm -f ${VIRL_PKEY} cat > ${VIRL_PKEY} <&1) echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\" if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] then # Candidate is in good status. Select this server. VIRL_SERVER[${index}]="$virl_server_candidate" else # Candidate is in bad status. Remove from array. VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}") fi done done echo "Selected VIRL servers: ${VIRL_SERVER[@]}" # Temporarily download VPP packages from nexus.fd.io DPDK_STABLE_VER=$(cat ${SCRIPT_DIR}/DPDK_STABLE_VER).x86_64 VPP_REPO_URL=$(cat ${SCRIPT_DIR}/VPP_REPO_URL_CENTOS) VPP_CLASSIFIER="" if [ "${#}" -ne "0" ]; then arr=(${@}) echo ${arr[0]} # DPDK is not part of the vpp build wget -q "${VPP_REPO_URL}/vpp-dpdk-devel/${DPDK_STABLE_VER}/vpp-dpdk-devel-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit else rm -f *.rpm VPP_STABLE_VER=$(cat ${SCRIPT_DIR}/VPP_STABLE_VER_CENTOS) wget -q "${VPP_REPO_URL}/vpp/${VPP_STABLE_VER}/vpp-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit wget -q "${VPP_REPO_URL}/vpp-debuginfo/${VPP_STABLE_VER}/vpp-debuginfo-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit wget -q "${VPP_REPO_URL}/vpp-devel/${VPP_STABLE_VER}/vpp-devel-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit wget -q "${VPP_REPO_URL}/vpp-dpdk-devel/${DPDK_STABLE_VER}/vpp-dpdk-devel-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit wget -q "${VPP_REPO_URL}/vpp-lib/${VPP_STABLE_VER}/vpp-lib-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit wget -q "${VPP_REPO_URL}/vpp-plugins/${VPP_STABLE_VER}/vpp-plugins-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit fi VPP_RPMS=(*.rpm) echo ${VPP_RPMS[@]} VIRL_DIR_LOC="/tmp" VPP_RPMS_FULL=(${VPP_RPMS[@]}) # Prepend directory location at remote host to rpm list for index in "${!VPP_RPMS_FULL[@]}"; do VPP_RPMS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_RPMS_FULL[${index}]} done echo "Updated file names: " ${VPP_RPMS_FULL[@]} cat ${VIRL_PKEY} # Copy the files to VIRL hosts DONE="" for index in "${!VIRL_SERVER[@]}"; do # Do not copy files in case they have already been copied to the VIRL host [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1 if [ "${copy}" -eq "0" ]; then echo "VPP rpms have already been copied to the VIRL host ${VIRL_SERVER[${index}]}" else scp ${SSH_OPTIONS} *.rpm \ ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/ result=$? if [ "${result}" -ne "0" ]; then echo "Failed to copy VPP rpms to VIRL host ${VIRL_SERVER[${index}]}" echo ${result} exit ${result} else echo "VPP rpms successfully copied to the VIRL host ${VIRL_SERVER[${index}]}" fi DONE+=(${VIRL_SERVER[${index}]}) fi done # Start a simulation on VIRL server function stop_virl_simulation { for index in "${!VIRL_SERVER[@]}"; do ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ "stop-testcase ${VIRL_SID[${index}]}" done } # Upon script exit, cleanup the simulation execution trap stop_virl_simulation EXIT for index in "${!VIRL_SERVER[@]}"; do echo "Starting simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" VIRL_SID[${index}]=$(ssh ${SSH_OPTIONS} \ ${VIRL_USERNAME}@${VIRL_SERVER[${index}]} \ "start-testcase -c ${VIRL_TOPOLOGY} -r ${VIRL_RELEASE} ${VPP_RPMS_FULL[@]}") retval=$? if [ ${retval} -ne "0" ]; then echo "VIRL simulation start failed on ${VIRL_SERVER[${index}]}" exit ${retval} fi if [[ ! "${VIRL_SID[${index}]}" =~ session-[a-zA-Z0-9_]{6} ]]; then echo "No VIRL session ID reported." exit 127 fi echo "VIRL simulation started on ${VIRL_SERVER[${index}]}" ssh_do ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ cat /scratch/${VIRL_SID[${index}]}/topology.yaml # Download the topology file from VIRL session and rename it scp ${SSH_OPTIONS} \ ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:/scratch/${VIRL_SID[${index}]}/topology.yaml \ topologies/enabled/topology${index}.yaml retval=$? if [ ${retval} -ne "0" ]; then echo "Failed to copy topology file from VIRL simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" exit ${retval} fi done echo ${VIRL_SID[@]} virtualenv --system-site-packages env . env/bin/activate echo pip install pip install -r ${SCRIPT_DIR}/requirements.txt for index in "${!VIRL_SERVER[@]}"; do pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \ -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \ -d ${SCRIPT_DIR}/topologies/enabled/topology${index}.yaml \ -vvv if [ "$?" -ne "0" ]; then echo "Topology${index} schema validation failed." echo "However, the tests will start." fi done function run_test_set() { set +x OLDIFS=$IFS IFS="," nr=$(echo $1) rm -f ${LOG_PATH}/test_run${nr}.log exec &> >(while read line; do echo "$(date +'%H:%M:%S') $line" \ >> ${LOG_PATH}/test_run${nr}.log; done;) suite_str="" for suite in ${TEST_GROUPS[${nr}]}; do suite_str="${suite_str} --suite ${SUITE_PATH}.${suite}" done IFS=$OLDIFS echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\ -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ ${suite_str} \ --include vm_envAND3_node_single_link_topo \ --include vm_envAND3_node_double_link_topo \ --exclude PERFTEST \ --exclude SKIP_PATCH \ --noncritical EXPECTED_FAILING \ --output ${LOG_PATH}/log_test_set_run${nr} \ tests/" PYTHONPATH=`pwd` pybot -L TRACE -W 136\ -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ ${suite_str} \ --include vm_envAND3_node_single_link_topo \ --include vm_envAND3_node_double_link_topo \ --exclude PERFTEST \ --exclude SKIP_PATCH \ --noncritical EXPECTED_FAILING \ --output ${LOG_PATH}/log_test_set_run${nr} \ tests/ local_run_rc=$? echo ${local_run_rc} > ${SHARED_MEMORY_PATH}/rc_test_run${nr} set -x } set +x # Send to background an instance of the run_test_set() function for each number, # record the pid. for index in "${!VIRL_SERVER[@]}"; do run_test_set ${index} & pid=$! echo "Sent to background: Test_set${index} (pid=$pid)" pids[$pid]=$index done echo echo -n "Waiting..." # Watch the stable of background processes. # If a pid goes away, remove it from the array. while [ -n "${pids[*]}" ]; do for i in $(seq 0 9); do sleep 1 echo -n "." done for pid in "${!pids[@]}"; do if ! ps "$pid" >/dev/null; then echo -e "\n" echo "Test_set${pids[$pid]} with PID $pid finished." unset pids[$pid] fi done if [ -z "${!pids[*]}" ]; then break fi echo -n -e "\nStill waiting for test set(s): ${pids[*]} ..." done echo echo "All test set runs finished." echo set -x RC=0 for index in "${!VIRL_SERVER[@]}"; do echo "Test_set${index} log:" cat ${LOG_PATH}/test_run${index}.log RC_PARTIAL_RUN=$(cat ${SHARED_MEMORY_PATH}/rc_test_run${index}) RC=$((RC+RC_PARTIAL_RUN)) rm -f ${SHARED_MEMORY_PATH}/rc_test_run${index} rm -f ${LOG_PATH}/test_run${index}.log echo done # Log the final result if [ "${RC}" -eq "0" ]; then set +x echo echo "========================================================================================================================================" echo "Final result of all test loops: | PASS |" echo "All critical tests have passed." echo "========================================================================================================================================" echo set -x else if [ "${RC}" -eq "1" ]; then HLP_STR="test has" else HLP_STR="tests have" fi set +x echo echo "========================================================================================================================================" echo "Final result of all test loops: | FAIL |" echo "${RC} critical ${HLP_STR} failed." echo "========================================================================================================================================" echo set -x fi echo Post-processing test data... partial_logs="" for index in "${!VIRL_SERVER[@]}"; do partial_logs="${partial_logs} ${LOG_PATH}/log_test_set_run${index}.xml" done # Rebot output post-processing rebot --noncritical EXPECTED_FAILING \ --output output.xml ${partial_logs} # Remove unnecessary log files rm -f ${partial_logs} echo Post-processing finished. if [ ${RC} -eq 0 ]; then RETURN_STATUS=0 else RETURN_STATUS=1 fi exit ${RETURN_STATUS}