# SuperMicro Cascadelake Servers - HW and BIOS Configuration 1. [Linux lscpu](#linux-lscpu) 1. [Linux dmidecode](#dmidecode) 1. [Linux dmidecode pci](#linux-dmidecode-pci) 1. [Linux dmidecode memory](#linux-dmidecode-memory) 1. [Xeon Clx Server BIOS Configuration](#xeon-clx-server-bios-configuration) 1. [Boot Feature](#boot-feature) 1. [CPU Configuration](#cpu-configuration) 1. [Advanced Power Management Configuration](#advanced-power-management-configuration) 1. [CPU P State Control](#cpu-p-state-control) 1. [Hardware PM State Control](#hardware-pm-state-control) 1. [CPU C State Control](#cpu-c-state-control) 1. [Package C State Control](#package-c-state-control) 1. [CPU T State Control](#cpu-t-state-control) 1. [Chipset Configuration](#chipset-configuration) 1. [North Bridge](#north-bridge) 1. [UPI Configuration](#upi-configuration) 1. [Memory Configuration](#memory-configuration) 1. [IIO Configuration](#iio-configuration) 1. [CPU1 Configuration](#cpu1-configuration) 1. [CPU2 Configuration](#cpu2-configuration) 1. [South Bridge](#south-bridge) 1. [PCIe/PCI/PnP Configuration](#pciepcipnp-configuration) 1. [ACPI Settings](#acpi-settings) 1. [Xeon Clx Server Firmware Inventory](#xeon-clx-server-firmware-inventory) ## Linux lscpu ``` $ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 112 On-line CPU(s) list: 0-111 Thread(s) per core: 2 Core(s) per socket: 28 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz Stepping: 7 CPU MHz: 3299.609 BogoMIPS: 5400.00 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 39424K NUMA node0 CPU(s): 0-27,56-83 NUMA node1 CPU(s): 28-55,84-111 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts pku ospke avx512_vnni md_clear flush_l1d arch_capabilities ``` ``` $ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 96 On-line CPU(s) list: 0-95 Thread(s) per core: 2 Core(s) per socket: 24 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz Stepping: 7 CPU MHz: 3000.989 BogoMIPS: 4600.00 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 36608K NUMA node0 CPU(s): 0-23,48-71 NUMA node1 CPU(s): 24-47,72-95 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts pku ospke avx512_vnni md_clear flush_l1d arch_capabilities ``` ## Linux dmidecode ``` # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 3.1.2 present. Table at 0x6EB92000. Handle 0x0000, DMI type 0, 26 bytes BIOS Information Vendor: American Megatrends Inc. Version: 3.0c Release Date: 03/27/2019 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 32 MB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 5.14 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: SYS-7049GP-TRT Version: 0123456789 Serial Number: S291427X9525476 UUID: 00000000-0000-0000-0000-AC1F6BACD7BA Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X11DPG-QT Version: 1.10A Serial Number: VM189S007860 Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: Supermicro Type: Other Lock: Not Present Version: 0123456789 Serial Number: C7470KH37A30566 Asset Tag: To be filled by O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: To be filled by O.E.M. Handle 0x0055, DMI type 4, 48 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Xeon Manufacturer: Intel(R) Corporation ID: 57 06 05 00 FF FB EB BF Signature: Type 0, Family 6, Model 85, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz Voltage: 1.6 V External Clock: 100 MHz Max Speed: 4500 MHz Current Speed: 2300 MHz Status: Populated, Enabled Upgrade: Socket LGA3647-1 L1 Cache Handle: 0x0052 L2 Cache Handle: 0x0053 L3 Cache Handle: 0x0054 Serial Number: Not Specified Asset Tag: UNKNOWN Part Number: Not Specified Core Count: 24 Core Enabled: 24 Thread Count: 48 Characteristics: 64-bit capable Multi-Core Hardware Thread Execute Protection Enhanced Virtualization Power/Performance Control Handle 0x0059, DMI type 4, 48 bytes Processor Information Socket Designation: CPU2 Type: Central Processor Family: Xeon Manufacturer: Intel(R) Corporation ID: 57 06 05 00 FF FB EB BF Signature: Type 0, Family 6, Model 85, Stepping 7 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz Voltage: 1.6 V External Clock: 100 MHz Max Speed: 4500 MHz Current Speed: 2300 MHz Status: Populated, Enabled Upgrade: Socket LGA3647-1 L1 Cache Handle: 0x0056 L2 Cache Handle: 0x0057 L3 Cache Handle: 0x0058 Serial Number: Not Specified Asset Tag: UNKNOWN Part Number: Not Specified Core Count: 24 Core Enabled: 24 Thread Count: 48 Characteristics: 64-bit capable Multi-Core Hardware Thread Execute Protection Enhanced Virtualization Power/Performance Control ``` ## Linux dmidecode pci ``` $ dmidecode -t slot Handle 0x000B, DMI type 9, 17 bytes System Slot Information Designation: CPU1 SLOT2 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: In Use Length: Long ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:18:00.0 Handle 0x000C, DMI type 9, 17 bytes System Slot Information Designation: CPU1 SLOT4 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: In Use Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:3b:00.0 Handle 0x000D, DMI type 9, 17 bytes System Slot Information Designation: CPU2 SLOT6 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: Available Length: Short ID: 6 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 Handle 0x000E, DMI type 9, 17 bytes System Slot Information Designation: CPU2 SLOT8 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: Available Length: Short ID: 8 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 Handle 0x000F, DMI type 9, 17 bytes System Slot Information Designation: CPU1 SLOT9 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: Available Length: Short ID: 9 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 Handle 0x0010, DMI type 9, 17 bytes System Slot Information Designation: CPU2 SLOT10 PCI-E 3.0 X16 Type: x16 PCI Express 3 x16 Current Usage: Available Length: Short ID: 10 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 Handle 0x0011, DMI type 9, 17 bytes System Slot Information Designation: CPU2 SLOT11 PCI-E 3.0 X4(IN X8) Type: x4 PCI Express 3 x8 Current Usage: Available Length: Short ID: 11 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 Handle 0x0012, DMI type 9, 17 bytes System Slot Information Designation: M.2 CONNECTOR Type: x4 M.2 Socket 2 Current Usage: Available Length: Short Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:ff:00.0 ``` ## Linux dmidecode memory ``` $ dmidecode -t memory Handle 0x0021, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 2304 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0023, DMI type 17, 84 bytes Memory Device Array Handle: 0x0021 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMMA1 Bank Locator: P0_Node0_Channel0_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F0E Asset Tag: P1-DIMMA1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0024, DMI type 17, 84 bytes Memory Device Array Handle: 0x0021 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: P1-DIMMA2 Bank Locator: P0_Node0_Channel0_Dimm1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: NO DIMM Serial Number: NO DIMM Asset Tag: NO DIMM Part Number: NO DIMM Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0025, DMI type 17, 84 bytes Memory Device Array Handle: 0x0021 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMMB1 Bank Locator: P0_Node0_Channel1_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F1F Asset Tag: P1-DIMMB1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0027, DMI type 17, 84 bytes Memory Device Array Handle: 0x0021 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMMC1 Bank Locator: P0_Node0_Channel2_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F07 Asset Tag: P1-DIMMC1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x002B, DMI type 17, 84 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMMD1 Bank Locator: P0_Node1_Channel0_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F02 Asset Tag: P1-DIMMD1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x002C, DMI type 17, 84 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: P1-DIMMD2 Bank Locator: P0_Node1_Channel0_Dimm1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: NO DIMM Serial Number: NO DIMM Asset Tag: NO DIMM Part Number: NO DIMM Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x002D, DMI type 17, 84 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMME1 Bank Locator: P0_Node1_Channel1_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F19 Asset Tag: P1-DIMME1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x002F, DMI type 17, 84 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P1-DIMMF1 Bank Locator: P0_Node1_Channel2_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275FD3 Asset Tag: P1-DIMMF1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0031, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 2304 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0033, DMI type 17, 84 bytes Memory Device Array Handle: 0x0031 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMMA1 Bank Locator: P1_Node0_Channel0_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275FE2 Asset Tag: P2-DIMMA1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0034, DMI type 17, 84 bytes Memory Device Array Handle: 0x0031 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: P2-DIMMA2 Bank Locator: P1_Node0_Channel0_Dimm1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: NO DIMM Serial Number: NO DIMM Asset Tag: NO DIMM Part Number: NO DIMM Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0035, DMI type 17, 84 bytes Memory Device Array Handle: 0x0031 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMMB1 Bank Locator: P1_Node0_Channel1_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93276001 Asset Tag: P2-DIMMB1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0037, DMI type 17, 84 bytes Memory Device Array Handle: 0x0031 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMMC1 Bank Locator: P1_Node0_Channel2_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93276005 Asset Tag: P2-DIMMC1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0039, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 2304 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x003B, DMI type 17, 84 bytes Memory Device Array Handle: 0x0039 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMMD1 Bank Locator: P1_Node1_Channel0_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275F44 Asset Tag: P2-DIMMD1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x003C, DMI type 17, 84 bytes Memory Device Array Handle: 0x0039 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: P2-DIMMD2 Bank Locator: P1_Node1_Channel0_Dimm1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: NO DIMM Serial Number: NO DIMM Asset Tag: NO DIMM Part Number: NO DIMM Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x003D, DMI type 17, 84 bytes Memory Device Array Handle: 0x0039 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMME1 Bank Locator: P1_Node1_Channel1_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275FDF Asset Tag: P2-DIMME1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x003F, DMI type 17, 84 bytes Memory Device Array Handle: 0x0039 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 16384 MB Form Factor: DIMM Set: None Locator: P2-DIMMF1 Bank Locator: P1_Node1_Channel2_Dimm0 Type: DDR4 Type Detail: Synchronous Speed: 2933 MT/s Manufacturer: SK Hynix Serial Number: 93275FDD Asset Tag: P2-DIMMF1_AssetTag (date:19/22) Part Number: HMA82GR7CJR8N-WM Rank: 2 Configured Clock Speed: 2934 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V ``` ## Xeon CLX Server BIOS Configuration - TG ### Boot Feature ``` | Quiet Boot [Enabled] |Boot option | | | | | Option ROM Messages [Force BIOS] | | | Bootup NumLock State [On] | | | Wait For "F1" If Error [Enabled] | | | INT19 Trap Response [Immediate] | | | Re-try Boot [Disabled] | | | Install Windows 7 USB support [Disabled] | | | Port 61h Bit-4 Emulation [Disabled] | | | | | | Power Configuration | | | Watch Dog Function [Disabled] | | | Restore on AC Power Loss [Last State] | | | Power Button Function [Instant Off] | | ``` ### CPU Configuration ``` | Processor Configuration ^|Enables Hyper Threading | | -------------------------------------------------- *|(Software Method to | | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical | | Processor Socket CPU1 | CPU2 *|Processor threads. | | Processor ID 00050657* | 00050657 *| | | Processor Frequency 2.700GHz | 2.700GHz *| | | Processor Max Ratio 1BH | 1BH *| | | Processor Min Ratio 0AH | 0AH *| | | Microcode Revision 0500002C | 0500002C *| | | L1 Cache RAM 64KB | 64KB *| | | L2 Cache RAM 1024KB | 1024KB *| | | L3 Cache RAM 39424KB | 39424KB *| | | Processor 0 Version *| | | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| | | Processor 1 Version *| | | Intel(R) Xeon(R) Platinum 8280 CPU @ 2.70GHz *| | | *|-----------------------------| | Hyper-Threading [ALL] [Enable] *|><: Select Screen | | Cores Enabled 0 *|^v: Select Item | | Monitor/Mwait [Auto] *|Enter: Select | | Execute Disable Bit [Enable] +|+/-: Change Opt. | | Intel Virtualization Technology [Enable] +|F1: General Help | | PPIN Control [Unlock/Enable] +|F2: Previous Values | | Hardware Prefetcher [Enable] +|F3: Optimized Defaults | | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit | | DCU Streamer Prefetcher [Enable] | | | DCU IP Prefetcher [Enable] | | | LLC Prefetch [Disable] | | | Extended APIC [Disable] | | | AES-NI [Enable] | | |> Advanced Power Management Configuration | | ``` #### Advanced Power Management Configuration ``` | Advanced Power Management Configuration |Switch CPU Power Management | | -------------------------------------------------- |profile | | Power Technology [Custom] | | | Power Performance Tuning [BIOS Controls EPB] | | | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | | |> CPU P State Control | | |> Hardware PM State Control | | |> CPU C State Control | | |> Package C State Control | | |> CPU T State Control | | ``` ##### CPU P State Control ``` | CPU P State Control |EIST allows the processor | | |to dynamically adjust | | SpeedStep (P-States) [Disable] |frequency and voltage based | | EIST PSD Function [HW_ALL] |on power versus performance | | |needs. | | | | ``` ##### Hardware PM State Control ``` | Hardware PM State Control |If set to Disable, hardware ^| | |will choose a P-state *| | Hardware P-States [Disable] |setting for the system *| | |based on an OS request. *| | |If set to Native Mode, *| | |hardware will choose a *| | |P-state setting based on OS *| | |guidance. *| | |If set to Native Mode with *| | |No Legacy Support, hardware *| | |will choose a P-state *| | |setting independently *| | |without OS guidance. +| | |If set to Out of Band Mode, +| | |hardware autonomously v| ``` ##### CPU C State Control ``` | CPU C State Control |Select Enable to support | | |Autonomous Core C-State | | Autonomous Core C-State [Disable] |control which will allow | | CPU C6 report [Disable] |the processor core to | | Enhanced Halt State (C1E) [Disable] |control its C-State setting | | |automatically and | | |independently. | ``` ##### Package C State Control ``` | Package C State Control |Limit the lowest package | | |level C-State to | | Package C State [C0/C1 state] |processors. Lower package | | |C-State lower processor | | |power consumption upon idle. | ``` ##### CPU T State Control ``` | CPU T State Control |Enable/Disable CPU | | |throttling by OS. | | Software Controlled T-States [Disable] |Throttling reduces power | | |consumption | ``` #### Chipset Configuration ``` | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters | | system to malfunction. | | |> North Bridge | | |> South Bridge | | ``` ##### North Bridge ``` |> UPI Configuration |Displays and provides | |> Memory Configuration |option to change the UPI | |> IIO Configuration |Settings | ``` ##### UPI Configuration ``` | UPI Configuration |Use this feature to select | | -------------------------------------------------- |the degrading precedence | | Number of CPU 2 |option for Ultra Path | | Number of Active UPI Link 3 |Interconnect connections. | | Current UPI Link Speed Fast |Select Topology Precedent | | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if | | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in | | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature | | 00000000FFFFFFFF |Precedent to degrade UPI | | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options | | Degrade Precedence [Topology Precedence] |are in conflict. | | Link L0p Enable [Disable] | | | Link L1 Enable [Disable] | | | IO Directory Cache (IODC) [Auto] | | | SNC [Disable] | | | XPT Prefetch [Disable] | | | KTI Prefetch [Enable] |-----------------------------| | Local/Remote Threshold [Auto] |><: Select Screen | | Stale AtoS [Auto] |^v: Select Item | | LLC Dead Line Alloc [Enable] |Enter: Select | | Isoc Mode [Auto] |+/-: Change Opt. | ``` ##### Memory Configuration ``` | |Select POR to enforce POR | | -------------------------------------------------- |restrictions for DDR4 | | Integrated Memory Controller (iMC) |frequency and voltage | | -------------------------------------------------- |programming | | | | | Enforce POR [POR] | | | PPR Type [Hard PPR] | | | Enhanced PPR [Disable] | | | Operation Mode [Test and Repair] | | | Memory Frequency [2933] | | | Data Scrambling for DDR4 [Auto] | | | tCCD_L Relaxation [Auto] | | | tRWSR Relaxation [Disable] | | | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | | | 2x Refresh [Auto] | | | Page Policy [Auto] | | | IMC Interleaving [2-way Interleave] |-----------------------------| |> Memory Topology |><: Select Screen | |> Memory RAS Configuration |^v: Select Item | ``` ##### IIO Configuration ``` | IIO Configuration |Expose IIO DFX devices and | | -------------------------------------------------- |other CPU devices like PMON | | | | | EV DFX Features [Disable] | | |> CPU1 Configuration | | |> CPU2 Configuration | | |> IOAT Configuration | | |> Intel. VT for Directed I/O (VT-d) | | |> Intel. VMD technology | | | | | | IIO-PCIE Express Global Options | | | ======================================== | | | PCI-E Completion Timeout Disable [No] | | ``` ##### CPU1 Configuration ``` | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port | | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected | | IOU2 (IIO PCIe Br3) [Auto] |slot(s) | |> CPU1 SLOT2 PCI-E 3.0 X16 | | |> CPU1 SLOT4 PCI-E 3.0 X16 | | |> CPU1 SLOT9 PCI-E 3.0 X16 | | ``` ##### CPU2 Configuration ``` | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port | | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected | | IOU2 (IIO PCIe Br3) [Auto] |slot(s) | |> CPU2 SLOT6 PCI-E 3.0 X16 | | |> CPU2 SLOT8 PCI-E 3.0 X16 | | |> CPU2 SLOT10 PCI-E 3.0 X16 | | ``` #### South Bridge ``` | |Enables Legacy USB support. | | USB Module Version 21 |AUTO option disables legacy | | |support if no USB devices | | USB Devices: |are connected. DISABLE | | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB | | |devices available only for | | Legacy USB Support [Enabled] |EFI applications. | | XHCI Hand-off [Enabled] | | | Port 60/64 Emulation [Enabled] | | | PCIe PLL SSC [Disable] | | | Real USB Wake Up [Enabled] | | | Front USB Wake Up [Enabled] | | | | | | Azalia [Auto] | | | Azalia PME Enable [Disabled] | | ``` ### PCIe/PCI/PnP Configuration ``` | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit | | *|capable Devices to be | | PCI Devices Common Settings: *|Decoded in Above 4G Address | | Above 4G Decoding [Enabled] *|Space (Only if System | | SR-IOV Support [Enabled] *|Supports 64 bit PCI | | ARI Support [Enabled] *|Decoding). | | MMIO High Base [56T] *| | | MMIO High Granularity Size [256G] *| | | Maximum Read Request [Auto] *| | | MMCFG Base [2G] *| | | NVMe Firmware Source [Vendor Defined *| | | Firmware] *| | | VGA Priority [Onboard] *| | | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------| | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen | | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item | | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select | | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. | | Bus Master Enable [Enabled] +|F1: General Help | | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values | | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults | | Onboard Video Option ROM [Legacy] v|F4: Save & Exit | |> Network Stack Configuration | | ``` ### ACPI Settings ``` | ACPI Settings |Enable or Disable Non | | |uniform Memory Access | | NUMA [Enabled] |(NUMA). | | WHEA Support [Enabled] | | | High Precision Event Timer [Enabled] | | ``` ## Xeon CLX Server BIOS Configuration - DUT ### Boot Feature ``` | Quiet Boot [Enabled] |Boot option | | | | | Option ROM Messages [Force BIOS] | | | Bootup NumLock State [On] | | | Wait For "F1" If Error [Enabled] | | | INT19 Trap Response [Immediate] | | | Re-try Boot [Disabled] | | | Install Windows 7 USB support [Disabled] | | | Port 61h Bit-4 Emulation [Disabled] | | | | | | Power Configuration | | | Watch Dog Function [Disabled] | | | Restore on AC Power Loss [Last State] | | | Power Button Function [Instant Off] | | ``` ### CPU Configuration ``` |--------------------------------------------------------------------+-----------------------------\ | Processor Configuration ^|Enables Hyper Threading | | -------------------------------------------------- *|(Software Method to | | Processor BSP Revision 50657 - CLX B1 *|Enable/Disable Logical | | Processor Socket CPU1 | CPU2 *|Processor threads. | | Processor ID 00050657* | 00050657 *| | | Processor Frequency 2.300GHz | 2.300GHz *| | | Processor Max Ratio 17H | 17H *| | | Processor Min Ratio 0AH | 0AH *| | | Microcode Revision 0500002C | 0500002C *| | | L1 Cache RAM 64KB | 64KB *| | | L2 Cache RAM 1024KB | 1024KB *| | | L3 Cache RAM 36608KB | 36608KB *| | | Processor 0 Version *| | | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| | | Processor 1 Version *| | | Intel(R) Xeon(R) Gold 6252N CPU @ 2.30GHz *| | | *|-----------------------------| | Hyper-Threading [ALL] [Enable] *|><: Select Screen | | Cores Enabled 0 *|^v: Select Item | | Monitor/Mwait [Auto] *|Enter: Select | | Execute Disable Bit [Enable] +|+/-: Change Opt. | | Intel Virtualization Technology [Enable] +|F1: General Help | | PPIN Control [Unlock/Enable] +|F2: Previous Values | | Hardware Prefetcher [Enable] +|F3: Optimized Defaults | | Adjacent Cache Prefetch [Enable] v|F4: Save & Exit | | DCU Streamer Prefetcher [Enable] | | | DCU IP Prefetcher [Enable] | | | LLC Prefetch [Disable] | | | Extended APIC [Disable] | | | AES-NI [Enable] | | |> Advanced Power Management Configuration | | ``` #### Advanced Power Management Configuration ``` | Advanced Power Management Configuration |Switch CPU Power Management | | -------------------------------------------------- |profile | | Power Technology [Custom] | | | Power Performance Tuning [BIOS Controls EPB] | | | ENERGY_PERF_BIAS_CFG mode [Maximum Performance] | | |> CPU P State Control | | |> Hardware PM State Control | | |> CPU C State Control | | |> Package C State Control | | |> CPU T State Control | | ``` ##### CPU P State Control ``` | CPU P State Control |EIST allows the processor | | |to dynamically adjust | | SpeedStep (P-States) [Disable] |frequency and voltage based | | Activate PBF [Disable] |on power versus performance | | Configure PBF [Enable] |needs. | | EIST PSD Function [HW_ALL] | | ``` ##### Hardware PM State Control ``` | Hardware PM State Control |If set to Disable, hardware ^| | |will choose a P-state *| | Hardware P-States [Disable] |setting for the system *| | |based on an OS request. *| | |If set to Native Mode, *| | |hardware will choose a *| | |P-state setting based on OS *| | |guidance. *| | |If set to Native Mode with *| | |No Legacy Support, hardware *| | |will choose a P-state *| | |setting independently *| | |without OS guidance. +| | |If set to Out of Band Mode, +| | |hardware autonomously v| ``` ##### CPU C State Control ``` | CPU C State Control |Select Enable to support | | |Autonomous Core C-State | | Autonomous Core C-State [Disable] |control which will allow | | CPU C6 report [Disable] |the processor core to | | Enhanced Halt State (C1E) [Disable] |control its C-State setting | | |automatically and | | |independently. | ``` ##### Package C State Control ``` | Package C State Control |Limit the lowest package | | |level C-State to | | Package C State [C0/C1 state] |processors. Lower package | | |C-State lower processor | | |power consumption upon idle. | ``` ##### CPU T State Control ``` | CPU T State Control |Enable/Disable CPU | | |throttling by OS. | | Software Controlled T-States [Disable] |Throttling reduces power | | |consumption | ``` #### Chipset Configuration ``` | WARNING: Setting wrong values in below sections may cause |North Bridge Parameters | | system to malfunction. | | |> North Bridge | | |> South Bridge | | ``` ##### North Bridge ``` |> UPI Configuration |Displays and provides | |> Memory Configuration |option to change the UPI | |> IIO Configuration |Settings | ``` ##### UPI Configuration ``` | UPI Configuration |Use this feature to select | | -------------------------------------------------- |the degrading precedence | | Number of CPU 2 |option for Ultra Path | | Number of Active UPI Link 3 |Interconnect connections. | | Current UPI Link Speed Fast |Select Topology Precedent | | Current UPI Link Frequency 10.4 GT/s |to degrade UPI features if | | UPI Global MMIO Low Base / Limit 90000000 / FBFFFFFF |system options are in | | UPI Global MMIO High Base / Limit 0000000000000000 / |conflict. Select Feature | | 00000000FFFFFFFF |Precedent to degrade UPI | | UPI Pci-e Configuration Base / Size 80000000 / 10000000 |topology if system options | | Degrade Precedence [Topology Precedence] |are in conflict. | | Link L0p Enable [Disable] | | | Link L1 Enable [Disable] | | | IO Directory Cache (IODC) [Auto] | | | SNC [Disable] | | | XPT Prefetch [Disable] | | | KTI Prefetch [Enable] |-----------------------------| | Local/Remote Threshold [Auto] |><: Select Screen | | Stale AtoS [Auto] |^v: Select Item | | LLC Dead Line Alloc [Enable] |Enter: Select | | Isoc Mode [Auto] |+/-: Change Opt. | ``` ##### Memory Configuration ``` | |Select POR to enforce POR | | -------------------------------------------------- |restrictions for DDR4 | | Integrated Memory Controller (iMC) |frequency and voltage | | -------------------------------------------------- |programming | | | | | Enforce POR [POR] | | | PPR Type [Hard PPR] | | | Enhanced PPR [Disable] | | | Operation Mode [Test and Repair] | | | Memory Frequency [2933] | | | Data Scrambling for DDR4 [Auto] | | | tCCD_L Relaxation [Auto] | | | tRWSR Relaxation [Disable] | | | tRFC Optimization for 16Gb Based DIMM [Force 550ns] | | | 2x Refresh [Auto] | | | Page Policy [Auto] | | | IMC Interleaving [2-way Interleave] |-----------------------------| |> Memory Topology |><: Select Screen | |> Memory RAS Configuration |^v: Select Item | ``` ##### IIO Configuration ``` | IIO Configuration |Expose IIO DFX devices and | | -------------------------------------------------- |other CPU devices like PMON | | | | | EV DFX Features [Disable] | | |> CPU1 Configuration | | |> CPU2 Configuration | | |> IOAT Configuration | | |> Intel. VT for Directed I/O (VT-d) | | |> Intel. VMD technology | | | | | | IIO-PCIE Express Global Options | | | ======================================== | | | PCI-E Completion Timeout Disable [No] | | ``` ##### CPU1 Configuration ``` | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port | | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected | | IOU2 (IIO PCIe Br3) [Auto] |slot(s) | |> CPU1 SLOT2 PCI-E 3.0 X16 | | |> CPU1 SLOT4 PCI-E 3.0 X16 | | |> CPU1 SLOT9 PCI-E 3.0 X16 | | ``` ##### CPU2 Configuration ``` | IOU0 (IIO PCIe Br1) [Auto] |Selects PCIe port | | IOU1 (IIO PCIe Br2) [Auto] |Bifurcation for selected | | IOU2 (IIO PCIe Br3) [Auto] |slot(s) | |> CPU2 SLOT6 PCI-E 3.0 X16 | | |> CPU2 SLOT8 PCI-E 3.0 X16 | | |> CPU2 SLOT10 PCI-E 3.0 X16 | | ``` #### South Bridge ``` | |Enables Legacy USB support. | | USB Module Version 21 |AUTO option disables legacy | | |support if no USB devices | | USB Devices: |are connected. DISABLE | | 1 Keyboard, 1 Mouse, 1 Hub |option will keep USB | | |devices available only for | | Legacy USB Support [Enabled] |EFI applications. | | XHCI Hand-off [Enabled] | | | Port 60/64 Emulation [Enabled] | | | PCIe PLL SSC [Disable] | | | Real USB Wake Up [Enabled] | | | Front USB Wake Up [Enabled] | | | | | | Azalia [Auto] | | | Azalia PME Enable [Disabled] | | ``` ### PCIe/PCI/PnP Configuration ``` | PCI Bus Driver Version A5.01.18 ^|Enables or Disables 64bit | | *|capable Devices to be | | PCI Devices Common Settings: *|Decoded in Above 4G Address | | Above 4G Decoding [Enabled] *|Space (Only if System | | SR-IOV Support [Enabled] *|Supports 64 bit PCI | | ARI Support [Enabled] *|Decoding). | | MMIO High Base [56T] *| | | MMIO High Granularity Size [256G] *| | | Maximum Read Request [Auto] *| | | MMCFG Base [2G] *| | | NVMe Firmware Source [Vendor Defined *| | | Firmware] *| | | VGA Priority [Onboard] *| | | CPU1 SLOT2 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU1 SLOT4 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU2 SLOT6 PCI-E 3.0 X16 OPROM [Legacy] *| | | CPU2 SLOT8 PCI-E 3.0 X16 OPROM [Legacy] *|-----------------------------| | CPU1 SLOT9 PCI-E 3.0 X16 OPROM [Legacy] *|><: Select Screen | | CPU2 SLOT10 PCI-E 3.0 X16 OPROM [Legacy] *|^v: Select Item | | CPU2 SLOT11 PCI-E 3.0 X4(IN X8) OPROM [Legacy] *|Enter: Select | | M.2 CONNECTOR OPROM [Legacy] *|+/-: Change Opt. | | Bus Master Enable [Enabled] +|F1: General Help | | Onboard LAN1 Option ROM [Legacy] +|F2: Previous Values | | Onboard LAN2 Option ROM [Disabled] +|F3: Optimized Defaults | | Onboard Video Option ROM [Legacy] v|F4: Save & Exit | |> Network Stack Configuration | | ``` ### ACPI Settings ``` | ACPI Settings |Enable or Disable Non | | |uniform Memory Access | | NUMA [Enabled] |(NUMA). | | WHEA Support [Enabled] | | | High Precision Event Timer [Enabled] | | ``` ## Xeon Clx Server Firmware Inventory ``` Host. IPMI IP. BMC. BIOS. CPLD. CPU Microcode. PCI Bus. X710 Firmware. XXV710 Firmware. i40e. MLX5 Firmware. mlx5_core E810 Firmware. ice. s33-t27-sut1. 10.30.55.18. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7. s34-t27-tg1. 10.30.55.19. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A. s35-t28-sut1. 10.30.55.20. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7. s36-t28-tg1. 10.30.55.21. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A. s37-t29-sut1. 10.30.55.22. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.70. 8.70. 2.19.3. 16.32.1010. 5.6-1.0.3.3. 4.00. 1.9.7. s38-t29-tg1. 10.30.55.23. 1.67. 3.2. 03.B1.05. 0500002C. A5.01.18. 8.30. 8.30. 2.19.3. 16.32.1010. 5.6-1.0.3.3. N/A. N/A. ```