# Copyright (c) 2016 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.TrafficGenerator
| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/interfaces.robot
| Resource | resources/libraries/robot/counters.robot
| Resource | resources/libraries/robot/bridge_domain.robot
| Resource | resources/libraries/robot/l2_xconnect.robot
| Resource | resources/libraries/robot/ipv4.robot
| Resource | resources/libraries/robot/ipv6.robot
| Documentation | Performance suite keywords

*** Keywords ***
| 3-node circular Topology Variables Setup
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
| | ...          | ${nodes['TG']}
| | Compute Path
| | ${tg_if1} | ${tg}= | Next Interface
| | ${dut1_if1} | ${dut1}= | Next Interface
| | ${dut1_if2} | ${dut1}= | Next Interface
| | ${dut2_if1} | ${dut2}= | Next Interface
| | ${dut2_if2} | ${dut2}= | Next Interface
| | ${tg_if2} | ${tg}= | Next Interface
| | Set Suite Variable | ${tg}
| | Set Suite Variable | ${tg_if1}
| | Set Suite Variable | ${tg_if2}
| | Set Suite Variable | ${dut1}
| | Set Suite Variable | ${dut1_if1}
| | Set Suite Variable | ${dut1_if2}
| | Set Suite Variable | ${dut2}
| | Set Suite Variable | ${dut2_if1}
| | Set Suite Variable | ${dut2_if2}

| 3-node circular Topology Variables Setup with DUT interface model
| | [Documentation] | Find a path between TG-DUT1-DUT2-TG based on interface
| | ...             | model provided as an argument. Set suite variables
| | ...             | tg, tg_if1, tg_if2, dut1, dut1_if1, dut1_if2,
| | ...             | dut2, dut2_if1, dut2_if2
| | [Arguments] | ${iface_model}
| | ${iface_model_list}= | Create list | ${iface_model}
| | Append Node | ${nodes['TG']}
| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list}
| | Append Node | ${nodes['TG']}
| | Compute Path
| | ${tg_if1} | ${tg}= | Next Interface
| | ${dut1_if1} | ${dut1}= | Next Interface
| | ${dut1_if2} | ${dut1}= | Next Interface
| | ${dut2_if1} | ${dut2}= | Next Interface
| | ${dut2_if2} | ${dut2}= | Next Interface
| | ${tg_if2} | ${tg}= | Next Interface
| | Set Suite Variable | ${tg}
| | Set Suite Variable | ${tg_if1}
| | Set Suite Variable | ${tg_if2}
| | Set Suite Variable | ${dut1}
| | Set Suite Variable | ${dut1_if1}
| | Set Suite Variable | ${dut1_if2}
| | Set Suite Variable | ${dut2}
| | Set Suite Variable | ${dut2_if1}
| | Set Suite Variable | ${dut2_if2}

| IPv4 forwarding initialized in a 3-node circular topology
| | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG
| | Set Interface State | ${dut1} | ${dut1_if1} | up
| | Set Interface State | ${dut1} | ${dut1_if2} | up
| | Set Interface State | ${dut2} | ${dut2_if1} | up
| | Set Interface State | ${dut2} | ${dut2_if2} | up
| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
| | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1}
| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut1_if1}
| | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut1_if2}
| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
| | dut1_v4.set_arp | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
| | dut2_v4.set_arp | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.1 | 24
| | dut1_v4.set_ip | ${dut1_if2} | 1.1.1.1 | 30
| | dut2_v4.set_ip | ${dut2_if1} | 1.1.1.2 | 30
| | dut2_v4.set_ip | ${dut2_if2} | 20.20.20.1 | 24
| | dut1_v4.set_route | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
| | dut2_v4.set_route | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
| | All Vpp Interfaces Ready Wait | ${nodes}

| IPv6 forwarding initialized in a 3-node circular topology
| | [Documentation] | Custom setup of IPv6 topology on all DUT nodes
| | ${prefix}= | Set Variable | 64
| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut1_if1}
| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:1::1 | ${prefix}
| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | 2001:3::1 | ${prefix}
| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | 2001:3::2 | ${prefix}
| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | 2001:2::1 | ${prefix}
| | Vpp nodes ra suppress link layer | ${nodes}
| | Vpp set IPv6 neighbor | ${dut1} | ${dut1_if1} | 2001:1::2
| | ...                    | ${tg1_if1_mac}
| | Vpp set IPv6 neighbor | ${dut2} | ${dut2_if2} | 2001:2::2
| | ...                    | ${tg1_if2_mac}
| | Vpp set IPv6 neighbor | ${dut1} | ${dut1_if2} | 2001:3::2
| | ...                    | ${dut2_if1_mac}
| | Vpp set IPv6 neighbor | ${dut2} | ${dut2_if1} | 2001:3::1
| | ...                    | ${dut1_if2_mac}
| | Vpp Route Add | ${dut1} | 2001:2::0 | ${prefix} | 2001:3::2 | ${dut1_if2}
| | Vpp Route Add | ${dut2} | 2001:1::0 | ${prefix} | 2001:3::1 | ${dut2_if1}

| L2 xconnect initialized in a 3-node circular topology
| | [Documentation] | Custom setup of L2 xconnect topology
| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | L2 setup xconnect on DUT | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | All Vpp Interfaces Ready Wait | ${nodes}

| L2 bridge domain initialized in a 3-node circular topology
| | [Documentation] | Custom setup of L2 bridge topology
| | Vpp l2bd forwarding setup | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | All Vpp Interfaces Ready Wait | ${nodes}

| 3-node Performance Suite Setup
| | [Arguments] | ${topology_type}
| | Reset startup configuration of VPP on all DUTs
| | Update All Interface Data On All Nodes | ${nodes}
| | 3-node circular Topology Variables Setup
| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
| | ...                          | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | ...                          | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | ...                          | ${topology_type}

3-node Performance Suite Setup with DUT's NIC model
| | [Arguments] | ${topology_type} | ${nic_model}
| | Reset startup configuration of VPP on all DUTs
| | Update All Interface Data On All Nodes | ${nodes}
| | 3-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
| | ...                          | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | ...                          | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | ...                          | ${topology_type}

| 3-node Performance Suite Teardown
| | Teardown traffic generator | ${tg}

| Find NDR using linear search and pps
| | [Documentation] | Find throughput by using RFC2544 linear search
| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
| | ...         | ${topology_type} | ${min_rate} | ${max_rate}
| | Set Duration | 60
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | Set Search Frame Size | ${framesize}
| | Set Search Rate Type pps
| | Linear Search | ${start_rate} | ${topology_type}
| | ${rate_per_stream}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2

| Find NDR using binary search and pps
| | [Documentation] | Find throughput by using RFC2544 binary search
| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
| | ...         | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | Set Duration | 60
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Frame Size | ${framesize}
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
| | ${rate_per_stream}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2

| Find NDR using combined search and pps
| | [Documentation] | Find throughput by using RFC2544 combined search
| | ...             | (linear + binary)
| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
| | ...         | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | Set Duration | 60
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | Set Search Frame Size | ${framesize}
| | Set Search Rate Type pps
| | Set Binary Convergence Threshold | ${threshold}
| | Combined Search | ${start_rate} | ${topology_type}
| | ${rate_per_stream}= | Verify Search Result
| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2

| Display result of NDR search
| | [Documentation] | Display result of NDR search in packet per seconds (total
| | ...             | and per stream) and Gbps
| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
| | Set Test Message | FINAL_RATE: ${rate_total} pps
| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
| | Set Test Message | FINAL_BANDWIDTH: ${bandwidth_total} Gbps | append=yes


| Traffic should pass with no loss
| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
| | Send traffic on | ${tg} | ${duration}
| | ...             | ${rate} | ${framesize} | ${topology_type}
| | No traffic loss occurred