# Copyright (c) 2016 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Test variables for Lisp API test suite."""

# Lisp status example test data.
lisp_status = [{"gpe_status":"disabled",
                "feature_status":"disabled"},
               {"gpe_status":"enabled",
                "feature_status":"enabled"}]

# Example lisp local eid we want set to VPP
# and then check if it is set correctly.
eid_table = [{'eid': '192.168.0.0',
              'vni': 0,
              'eid-prefix-len': 24,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '192.168.1.0',
              'vni': 0,
              'eid-prefix-len': 24,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '192.168.2.0',
              'vni': 0,
              'eid-prefix-len': 24,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '192.168.3.0',
              'vni': 0,
              'eid-prefix-len': 24,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '10:1::',
              'vni': 0,
              'eid-prefix-len': 64,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '10:2::',
              'vni': 0,
              'eid-prefix-len': 64,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0},
             {'eid': '10:3::',
              'vni': 0,
              'eid-prefix-len': 64,
              'locator': [],
              'locator-set': 'ls1',
              'ttl': 0,
              'authoritative': 0}]

# Expected data from VPP via VAT
eid_table_vat = [
    {
        "action": 0,
        "is_local": 1,
        "eid": "192.168.0.0/24",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "192.168.1.0/24",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "192.168.2.0/24",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "192.168.3.0/24",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "10:1::/64",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "10:2::/64",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    },
    {
        "action": 0,
        "is_local": 1,
        "eid": "10:3::/64",
        "vni": 0,
        "ttl": 0,
        "authoritative": 0
    }
]

# Example lisp map resolvers data we want set to VPP
# and then check if it is set correctly.
map_resolver = [{'map resolver': '192.169.0.1'},
                {'map resolver': '192.169.1.1'},
                {'map resolver': '192.169.2.1'},
                {'map resolver': '12:1::1'},
                {'map resolver': '12:2::1'}]