# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VIRTIO | 1VM
| ... | VIRTIO_1024 | NF_VPPL2XC_VIRTIO | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | vhost
|
| Test Template | Local Template
|
| Documentation | *RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test
| ... | cases*
|
| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
| ... | single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\
| ... | MAC learning enabled. Qemu VNFs are connected to VPP via\
| ... | vhost-user interfaces. Guest is running VPP l2xc interconnecting \
| ... | virtio interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using MLRsearch library.\
| ... | Test packets are generated by TG on\
| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
| ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
| ... | interfaces.
| ... | *[Ref] Applicable standard specifications:* RFC2544.

*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
| ${bd_id1}= | 1
| ${bd_id2}= | 2
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-dot1qip4asym-ip4src254

*** Keywords ***
| Local Template
| | [Documentation]
| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
| | ... | physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| |
| | Set Test Variable | \${frame_size}
| |
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
| | ... | use_tuned_cfs=${False} | auto_scale=${True}
| | ... | vnf=vppl2xc_2virtiovr1024
| | Then Find NDR and PDR intervals using optimized search

*** Test Cases ***
| tc01-64B-1c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}

| tc02-64B-2c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}

| tc03-64B-4c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}

| tc04-1518B-1c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}

| tc05-1518B-2c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}

| tc06-1518B-4c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}

| tc07-9000B-1c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}

| tc08-9000B-2c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}

| tc09-9000B-4c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}

| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}

| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}

| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-eth-2virtiovr1024-1vm-vppl2xc-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}