From 8b25d1ad5d2264bdfc2818c7bda74ee2697df6db Mon Sep 17 00:00:00 2001 From: Christian Ehrhardt Date: Wed, 6 Jul 2016 09:22:35 +0200 Subject: Imported Upstream version 16.07-rc1 Change-Id: I40a523e52f12e8496fdd69e902824b0226c303de Signed-off-by: Christian Ehrhardt --- doc/guides/nics/qede.rst | 314 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 314 insertions(+) create mode 100644 doc/guides/nics/qede.rst (limited to 'doc/guides/nics/qede.rst') diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst new file mode 100644 index 00000000..f7ca8eb9 --- /dev/null +++ b/doc/guides/nics/qede.rst @@ -0,0 +1,314 @@ +.. BSD LICENSE + Copyright (c) 2016 QLogic Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of QLogic Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +QEDE Poll Mode Driver +====================== + +The QEDE poll mode driver library (**librte_pmd_qede**) implements support +for **QLogic FastLinQ QL4xxxx 25G/40G CNA** family of adapters as well +as their virtual functions (VF) in SR-IOV context. It is supported on +several standard Linux distros like RHEL7.x, SLES12.x and Ubuntu. +It is compile-tested under FreeBSD OS. + +More information can be found at `QLogic Corporation's Website +`_. + +Supported Features +------------------ + +- Unicast/Multicast filtering +- Promiscuous mode +- Allmulti mode +- Port hardware statistics +- Jumbo frames (using single buffer) +- VLAN offload - Filtering and stripping +- Stateless checksum offloads (IPv4/TCP/UDP) +- Multiple Rx/Tx queues (queue-pairs) +- RSS (with user configurable table/key) +- TSS +- Multiple MAC address +- Default pause flow control +- SR-IOV VF for 25G/40G modes + +Non-supported Features +---------------------- + +- Scatter-Gather Rx/Tx frames +- Unequal number of Rx/Tx queues +- MTU change (dynamic) +- SR-IOV PF +- Tunneling offloads +- Reload of the PMD after a non-graceful termination + +Supported QLogic Adapters +------------------------- + +- QLogic FastLinQ QL4xxxx 25G/40G/100G CNAs. + +Prerequisites +------------- + +- Requires firmware version **8.7.x.** and management firmware + version **8.7.x or higher**. Firmware may be available + inbox in certain newer Linux distros under the standard directory + ``E.g. /lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin`` + +- If the required firmware files are not available then visit + `QLogic Driver Download Center `_. + +- This driver relies on external zlib library (-lz) for uncompressing + the firmware file. + +Performance note +~~~~~~~~~~~~~~~~ + +- For better performance, it is recommended to use 4K or higher RX/TX rings. + +Config File Options +~~~~~~~~~~~~~~~~~~~ + +The following options can be modified in the ``.config`` file. Please note that +enabling debugging options may affect system performance. + +- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) + + Toggle compilation of QEDE PMD driver. + +- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO`` (default **n**) + + Toggle display of generic debugging messages. + +- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER`` (default **n**) + + Toggle display of ecore related messages. + +- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**) + + Toggle display of transmit fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) + + Toggle display of receive fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) + + Gives absolute path of firmware file. + ``Eg: "/lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin"`` + Empty string indicates driver will pick up the firmware file + from the default location. + +Driver Compilation +~~~~~~~~~~~~~~~~~~ + +To compile QEDE PMD for Linux x86_64 gcc target, run the following ``make`` +command:: + + cd + make config T=x86_64-native-linuxapp-gcc install + +To compile QEDE PMD for Linux x86_64 clang target, run the following ``make`` +command:: + + cd + make config T=x86_64-native-linuxapp-clang install + +To compile QEDE PMD for FreeBSD x86_64 clang target, run the following ``gmake`` +command:: + + cd + gmake config T=x86_64-native-bsdapp-clang install + +To compile QEDE PMD for FreeBSD x86_64 gcc target, run the following ``gmake`` +command:: + + cd + gmake config T=x86_64-native-bsdapp-gcc install -Wl,-rpath=\ + /usr/local/lib/gcc48 CC=gcc48 + + +Sample Application Notes +~~~~~~~~~~~~~~~~~~~~~~~~ + +This section demonstrates how to launch ``testpmd`` with QLogic 4xxxx +devices managed by ``librte_pmd_qede`` in Linux operating system. + +#. Request huge pages: + + .. code-block:: console + + echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/ \ + nr_hugepages + +#. Load ``igb_uio`` driver: + + .. code-block:: console + + insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko + +#. Bind the QLogic 4xxxx adapters to ``igb_uio`` loaded in the + previous step: + + .. code-block:: console + + ./tools/dpdk_nic_bind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \ + 0000:84:00.2 0000:84:00.3 + +#. Start ``testpmd`` with basic parameters: + (Enable QEDE_DEBUG_INFO=y to view informational messages) + + .. code-block:: console + + testpmd -c 0xff1 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \ + --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \ + --rss-ip --rss-udp + + [...] + + EAL: PCI device 0000:84:00.0 on NUMA socket 1 + EAL: probe driver: 1077:1634 rte_qede_pmd + EAL: Not managed by a supported kernel driver, skipped + EAL: PCI device 0000:84:00.1 on NUMA socket 1 + EAL: probe driver: 1077:1634 rte_qede_pmd + EAL: Not managed by a supported kernel driver, skipped + EAL: PCI device 0000:88:00.0 on NUMA socket 1 + EAL: probe driver: 1077:1656 rte_qede_pmd + EAL: PCI memory mapped at 0x7f738b200000 + EAL: PCI memory mapped at 0x7f738b280000 + EAL: PCI memory mapped at 0x7f738b300000 + PMD: Chip details : BB1 + PMD: Driver version : QEDE PMD 8.7.9.0_1.0.0 + PMD: Firmware version : 8.7.7.0 + PMD: Management firmware version : 8.7.8.0 + PMD: Firmware file : /lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_common_dev_init:macaddr \ + 00:0e:1e:d2:09:9c + [...] + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 0 num_desc 4096 \ + tx_free_thresh 4068 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 1 num_desc 4096 \ + tx_free_thresh 4068 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 2 num_desc 4096 \ + tx_free_thresh 4068 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 3 num_desc 4096 \ + tx_free_thresh 4068 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 0 num_desc 4096 \ + rx_buf_size=2148 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 1 num_desc 4096 \ + rx_buf_size=2148 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 2 num_desc 4096 \ + rx_buf_size=2148 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 3 num_desc 4096 \ + rx_buf_size=2148 socket 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:port 0 + [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:link status: down + [...] + Checking link statuses... + Port 0 Link Up - speed 25000 Mbps - full-duplex + Port 1 Link Up - speed 25000 Mbps - full-duplex + Port 2 Link Up - speed 25000 Mbps - full-duplex + Port 3 Link Up - speed 25000 Mbps - full-duplex + Done + testpmd> + + +SR-IOV: Prerequisites and Sample Application Notes +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section provides instructions to configure SR-IOV with Linux OS. + +**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver. + +#. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``: + + .. code-block:: console + + lspci -s -vvv + + Example output: + + .. code-block:: console + + [...] + Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI) + [...] + Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV) + [...] + Kernel driver in use: igb_uio + +#. Load the kernel module: + + .. code-block:: console + + modprobe qede + + Example output: + + .. code-block:: console + + systemd-udevd[4848]: renamed network interface eth0 to ens5f0 + systemd-udevd[4848]: renamed network interface eth1 to ens5f1 + +#. Bring up the PF ports: + + .. code-block:: console + + ifconfig ens5f0 up + ifconfig ens5f1 up + +#. Create VF device(s): + + Echo the number of VFs to be created into ``"sriov_numvfs"`` sysfs entry + of the parent PF. + + Example output: + + .. code-block:: console + + echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs + + +#. Assign VF MAC address: + + Assign MAC address to the VF using iproute2 utility. The syntax is:: + + ip link set vf mac + + Example output: + + .. code-block:: console + + ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8 + + +#. PCI Passthrough: + + The VF devices may be passed through to the guest VM using ``virt-manager`` or + ``virsh``. QEDE PMD should be used to bind the VF devices in the guest VM + using the instructions outlined in the Application notes above. -- cgit 1.2.3-korg