From 5129044dce1f85ce4950f31bcf90f3886466f06a Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:54:47 -0700 Subject: Imported upstream release 16.04 * gbp import-orig ../dpdk-16.04.tar.xz Change-Id: Iac2196db782ba322f6974d8a752acc34ce5024c3 Signed-off-by: C.J. Collier --- doc/guides/prog_guide/ring_lib.rst | 399 +++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) create mode 100644 doc/guides/prog_guide/ring_lib.rst (limited to 'doc/guides/prog_guide/ring_lib.rst') diff --git a/doc/guides/prog_guide/ring_lib.rst b/doc/guides/prog_guide/ring_lib.rst new file mode 100644 index 00000000..3b92a8f0 --- /dev/null +++ b/doc/guides/prog_guide/ring_lib.rst @@ -0,0 +1,399 @@ +.. BSD LICENSE + Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.. _Ring_Library: + +Ring Library +============ + +The ring allows the management of queues. +Instead of having a linked list of infinite size, the rte_ring has the following properties: + +* FIFO + +* Maximum size is fixed, the pointers are stored in a table + +* Lockless implementation + +* Multi-consumer or single-consumer dequeue + +* Multi-producer or single-producer enqueue + +* Bulk dequeue - Dequeues the specified count of objects if successful; otherwise fails + +* Bulk enqueue - Enqueues the specified count of objects if successful; otherwise fails + +* Burst dequeue - Dequeue the maximum available objects if the specified count cannot be fulfilled + +* Burst enqueue - Enqueue the maximum available objects if the specified count cannot be fulfilled + +The advantages of this data structure over a linked list queue are as follows: + +* Faster; only requires a single Compare-And-Swap instruction of sizeof(void \*) instead of several double-Compare-And-Swap instructions. + +* Simpler than a full lockless queue. + +* Adapted to bulk enqueue/dequeue operations. + As pointers are stored in a table, a dequeue of several objects will not produce as many cache misses as in a linked queue. + Also, a bulk dequeue of many objects does not cost more than a dequeue of a simple object. + +The disadvantages: + +* Size is fixed + +* Having many rings costs more in terms of memory than a linked list queue. An empty ring contains at least N pointers. + +A simplified representation of a Ring is shown in with consumer and producer head and tail pointers to objects stored in the data structure. + +.. _figure_ring1: + +.. figure:: img/ring1.* + + Ring Structure + + +References for Ring Implementation in FreeBSD* +---------------------------------------------- + +The following code was added in FreeBSD 8.0, and is used in some network device drivers (at least in Intel drivers): + + * `bufring.h in FreeBSD `_ + + * `bufring.c in FreeBSD `_ + +Lockless Ring Buffer in Linux* +------------------------------ + +The following is a link describing the `Linux Lockless Ring Buffer Design `_. + +Additional Features +------------------- + +Name +~~~~ + +A ring is identified by a unique name. +It is not possible to create two rings with the same name (rte_ring_create() returns NULL if this is attempted). + +Water Marking +~~~~~~~~~~~~~ + +The ring can have a high water mark (threshold). +Once an enqueue operation reaches the high water mark, the producer is notified, if the water mark is configured. + +This mechanism can be used, for example, to exert a back pressure on I/O to inform the LAN to PAUSE. + +Debug +~~~~~ + +When debug is enabled (CONFIG_RTE_LIBRTE_RING_DEBUG is set), +the library stores some per-ring statistic counters about the number of enqueues/dequeues. +These statistics are per-core to avoid concurrent accesses or atomic operations. + +Use Cases +--------- + +Use cases for the Ring library include: + + * Communication between applications in the DPDK + + * Used by memory pool allocator + +Anatomy of a Ring Buffer +------------------------ + +This section explains how a ring buffer operates. +The ring structure is composed of two head and tail couples; one is used by producers and one is used by the consumers. +The figures of the following sections refer to them as prod_head, prod_tail, cons_head and cons_tail. + +Each figure represents a simplified state of the ring, which is a circular buffer. +The content of the function local variables is represented on the top of the figure, +and the content of ring structure is represented on the bottom of the figure. + +Single Producer Enqueue +~~~~~~~~~~~~~~~~~~~~~~~ + +This section explains what occurs when a producer adds an object to the ring. +In this example, only the producer head and tail (prod_head and prod_tail) are modified, +and there is only one producer. + +The initial state is to have a prod_head and prod_tail pointing at the same location. + +Enqueue First Step +^^^^^^^^^^^^^^^^^^ + +First, *ring->prod_head* and ring->cons_tail are copied in local variables. +The prod_next local variable points to the next element of the table, or several elements after in case of bulk enqueue. + +If there is not enough room in the ring (this is detected by checking cons_tail), it returns an error. + + +.. _figure_ring-enqueue1: + +.. figure:: img/ring-enqueue1.* + + Enqueue first step + + +Enqueue Second Step +^^^^^^^^^^^^^^^^^^^ + +The second step is to modify *ring->prod_head* in ring structure to point to the same location as prod_next. + +A pointer to the added object is copied in the ring (obj4). + + +.. _figure_ring-enqueue2: + +.. figure:: img/ring-enqueue2.* + + Enqueue second step + + +Enqueue Last Step +^^^^^^^^^^^^^^^^^ + +Once the object is added in the ring, ring->prod_tail in the ring structure is modified to point to the same location as *ring->prod_head*. +The enqueue operation is finished. + + +.. _figure_ring-enqueue3: + +.. figure:: img/ring-enqueue3.* + + Enqueue last step + + +Single Consumer Dequeue +~~~~~~~~~~~~~~~~~~~~~~~ + +This section explains what occurs when a consumer dequeues an object from the ring. +In this example, only the consumer head and tail (cons_head and cons_tail) are modified and there is only one consumer. + +The initial state is to have a cons_head and cons_tail pointing at the same location. + +Dequeue First Step +^^^^^^^^^^^^^^^^^^ + +First, ring->cons_head and ring->prod_tail are copied in local variables. +The cons_next local variable points to the next element of the table, or several elements after in the case of bulk dequeue. + +If there are not enough objects in the ring (this is detected by checking prod_tail), it returns an error. + + +.. _figure_ring-dequeue1: + +.. figure:: img/ring-dequeue1.* + + Dequeue last step + + +Dequeue Second Step +^^^^^^^^^^^^^^^^^^^ + +The second step is to modify ring->cons_head in the ring structure to point to the same location as cons_next. + +The pointer to the dequeued object (obj1) is copied in the pointer given by the user. + + +.. _figure_ring-dequeue2: + +.. figure:: img/ring-dequeue2.* + + Dequeue second step + + +Dequeue Last Step +^^^^^^^^^^^^^^^^^ + +Finally, ring->cons_tail in the ring structure is modified to point to the same location as ring->cons_head. +The dequeue operation is finished. + + +.. _figure_ring-dequeue3: + +.. figure:: img/ring-dequeue3.* + + Dequeue last step + + +Multiple Producers Enqueue +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section explains what occurs when two producers concurrently add an object to the ring. +In this example, only the producer head and tail (prod_head and prod_tail) are modified. + +The initial state is to have a prod_head and prod_tail pointing at the same location. + +Multiple Consumer Enqueue First Step +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +On both cores, *ring->prod_head* and ring->cons_tail are copied in local variables. +The prod_next local variable points to the next element of the table, +or several elements after in the case of bulk enqueue. + +If there is not enough room in the ring (this is detected by checking cons_tail), it returns an error. + + +.. _figure_ring-mp-enqueue1: + +.. figure:: img/ring-mp-enqueue1.* + + Multiple consumer enqueue first step + + +Multiple Consumer Enqueue Second Step +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The second step is to modify ring->prod_head in the ring structure to point to the same location as prod_next. +This operation is done using a Compare And Swap (CAS) instruction, which does the following operations atomically: + +* If ring->prod_head is different to local variable prod_head, + the CAS operation fails, and the code restarts at first step. + +* Otherwise, ring->prod_head is set to local prod_next, + the CAS operation is successful, and processing continues. + +In the figure, the operation succeeded on core 1, and step one restarted on core 2. + + +.. _figure_ring-mp-enqueue2: + +.. figure:: img/ring-mp-enqueue2.* + + Multiple consumer enqueue second step + + +Multiple Consumer Enqueue Third Step +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The CAS operation is retried on core 2 with success. + +The core 1 updates one element of the ring(obj4), and the core 2 updates another one (obj5). + + +.. _figure_ring-mp-enqueue3: + +.. figure:: img/ring-mp-enqueue3.* + + Multiple consumer enqueue third step + + +Multiple Consumer Enqueue Fourth Step +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Each core now wants to update ring->prod_tail. +A core can only update it if ring->prod_tail is equal to the prod_head local variable. +This is only true on core 1. The operation is finished on core 1. + + +.. _figure_ring-mp-enqueue4: + +.. figure:: img/ring-mp-enqueue4.* + + Multiple consumer enqueue fourth step + + +Multiple Consumer Enqueue Last Step +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Once ring->prod_tail is updated by core 1, core 2 is allowed to update it too. +The operation is also finished on core 2. + + +.. _figure_ring-mp-enqueue5: + +.. figure:: img/ring-mp-enqueue5.* + + Multiple consumer enqueue last step + + +Modulo 32-bit Indexes +~~~~~~~~~~~~~~~~~~~~~ + +In the preceding figures, the prod_head, prod_tail, cons_head and cons_tail indexes are represented by arrows. +In the actual implementation, these values are not between 0 and size(ring)-1 as would be assumed. +The indexes are between 0 and 2^32 -1, and we mask their value when we access the pointer table (the ring itself). +32-bit modulo also implies that operations on indexes (such as, add/subtract) will automatically do 2^32 modulo +if the result overflows the 32-bit number range. + +The following are two examples that help to explain how indexes are used in a ring. + +.. note:: + + To simplify the explanation, operations with modulo 16-bit are used instead of modulo 32-bit. + In addition, the four indexes are defined as unsigned 16-bit integers, + as opposed to unsigned 32-bit integers in the more realistic case. + + +.. _figure_ring-modulo1: + +.. figure:: img/ring-modulo1.* + + Modulo 32-bit indexes - Example 1 + + +This ring contains 11000 entries. + + +.. _figure_ring-modulo2: + +.. figure:: img/ring-modulo2.* + + Modulo 32-bit indexes - Example 2 + + +This ring contains 12536 entries. + +.. note:: + + For ease of understanding, we use modulo 65536 operations in the above examples. + In real execution cases, this is redundant for low efficiency, but is done automatically when the result overflows. + +The code always maintains a distance between producer and consumer between 0 and size(ring)-1. +Thanks to this property, we can do subtractions between 2 index values in a modulo-32bit base: +that's why the overflow of the indexes is not a problem. + +At any time, entries and free_entries are between 0 and size(ring)-1, +even if only the first term of subtraction has overflowed: + +.. code-block:: c + + uint32_t entries = (prod_tail - cons_head); + uint32_t free_entries = (mask + cons_tail -prod_head); + +References +---------- + + * `bufring.h in FreeBSD `_ (version 8) + + * `bufring.c in FreeBSD `_ (version 8) + + * `Linux Lockless Ring Buffer Design `_ -- cgit 1.2.3-korg