From 97f17497d162afdb82c8704bf097f0fee3724b2e Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:50:17 -0700 Subject: Imported Upstream version 16.04 Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier --- doc/guides/sample_app_ug/netmap_compatibility.rst | 175 ++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 doc/guides/sample_app_ug/netmap_compatibility.rst (limited to 'doc/guides/sample_app_ug/netmap_compatibility.rst') diff --git a/doc/guides/sample_app_ug/netmap_compatibility.rst b/doc/guides/sample_app_ug/netmap_compatibility.rst new file mode 100644 index 00000000..41f05186 --- /dev/null +++ b/doc/guides/sample_app_ug/netmap_compatibility.rst @@ -0,0 +1,175 @@ +.. BSD LICENSE + Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +Netmap Compatibility Sample Application +======================================= + +Introduction +------------ + +The Netmap compatibility library provides a minimal set of APIs to give programs written against the Netmap APIs +the ability to be run, with minimal changes to their source code, using the DPDK to perform the actual packet I/O. + +Since Netmap applications use regular system calls, like ``open()``, ``ioctl()`` and +``mmap()`` to communicate with the Netmap kernel module performing the packet I/O, +the ``compat_netmap`` library provides a set of similar APIs to use in place of those system calls, +effectively turning a Netmap application into a DPDK application. + +The provided library is currently minimal and doesn't support all the features that Netmap supports, +but is enough to run simple applications, such as the bridge example detailed below. + +Knowledge of Netmap is required to understand the rest of this section. +Please refer to the Netmap distribution for details about Netmap. + +Available APIs +-------------- + +The library provides the following drop-in replacements for system calls usually used in Netmap applications: + +* ``rte_netmap_close()`` + +* ``rte_netmap_ioctl()`` + +* ``rte_netmap_open()`` + +* ``rte_netmap_mmap()`` + +* ``rte_netmap_poll()`` + +They use the same signature as their libc counterparts, and can be used as drop-in replacements in most cases. + +Caveats +------- + +Given the difference between the way Netmap and the DPDK approach packet I/O, +there are caveats and limitations to be aware of when trying to use the ``compat_netmap`` library, the most important of these are listed below. +These may change as the library is updated: + +* Any system call that can potentially affect file descriptors cannot be used with a descriptor returned by the ``rte_netmap_open()`` function. + +Note that: + +* The ``rte_netmap_mmap()`` function merely returns the address of a DPDK memzone. + The address, length, flags, offset, and other arguments are ignored. + +* The ``rte_netmap_poll()`` function only supports infinite (negative) or zero time outs. + It effectively turns calls to the ``poll()`` system call made in a Netmap application into polling of the DPDK ports, + changing the semantics of the usual POSIX defined poll. + +* Not all of Netmap's features are supported: host rings, + slot flags and so on are not supported or are simply not relevant in the DPDK model. + +* The Netmap manual page states that "*a device obtained through /dev/netmap also supports the ioctl supported by network devices*". + This is not the case with this compatibility layer. + +* The Netmap kernel module exposes a sysfs interface to change some internal parameters, such as the size of the shared memory region. + This interface is not available when using this compatibility layer. + +Porting Netmap Applications +--------------------------- + +Porting Netmap applications typically involves two major steps: + +* Changing the system calls to use their ``compat_netmap`` library counterparts. + +* Adding further DPDK initialization code. + +Since the ``compat_netmap`` functions have the same signature as the usual libc calls, the change is trivial in most cases. + +The usual DPDK initialization code involving ``rte_eal_init()`` and ``rte_eal_pci_probe()`` +has to be added to the Netmap application in the same way it is used in all other DPDK sample applications. +Please refer to the *DPDK Programmer's Guide* and example source code for details about initialization. + +In addition of the regular DPDK initialization code, +the ported application needs to call initialization functions for the ``compat_netmap`` library, +namely ``rte_netmap_init()`` and ``rte_netmap_init_port()``. + +These two initialization functions take ``compat_netmap`` specific data structures as parameters: +``struct rte_netmap_conf`` and ``struct rte_netmap_port_conf``. +The structures' fields are Netmap related and are self-explanatory for developers familiar with Netmap. +They are defined in ``$RTE_SDK/examples/netmap_compat/lib/compat_netmap.h``. + +The bridge application is an example largely based on the bridge example shipped with the Netmap distribution. +It shows how a minimal Netmap application with minimal and straightforward source code changes can be run on top of the DPDK. +Please refer to ``$RTE_SDK/examples/netmap_compat/bridge/bridge.c`` for an example of a ported application. + +Compiling the "bridge" Sample Application +----------------------------------------- + +#. Go to the example directory: + + .. code-block:: console + + export RTE_SDK=/path/to/rte_sdk + cd ${RTE_SDK}/examples/netmap_compat + +#. Set the target (a default target is used if not specified). For example: + + .. code-block:: console + + export RTE_TARGET=x86_64-native-linuxapp-gcc + + See the *DPDK Getting Started Guide for Linux* for possible ``RTE_TARGET`` values. + +#. Build the application: + + .. code-block:: console + + make + +Running the "bridge" Sample Application +--------------------------------------- + +The application requires a single command line option: + +.. code-block:: console + + ./build/bridge [EAL options] -- -i INTERFACE_A [-i INTERFACE_B] + +where, + +* ``-i INTERFACE``: Interface (DPDK port number) to use. + + If a single ``-i`` parameter is given, the interface will send back all the traffic it receives. + If two ``-i`` parameters are given, the two interfaces form a bridge, + where traffic received on one interface is replicated and sent to the other interface. + +For example, to run the application in a linuxapp environment using port 0 and 2: + +.. code-block:: console + + ./build/bridge [EAL options] -- -i 0 -i 2 + +Refer to the *DPDK Getting Started Guide for Linux* for general information on running applications and +the Environment Abstraction Layer (EAL) options. + +Note that unlike a traditional bridge or the ``l2fwd`` sample application, no MAC address changes are done on the frames. +Do not forget to take this into account when configuring a traffic generators and testing this sample application. -- cgit 1.2.3-korg