From 97f17497d162afdb82c8704bf097f0fee3724b2e Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:50:17 -0700 Subject: Imported Upstream version 16.04 Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier --- drivers/net/bnx2x/ecore_init.h | 819 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 819 insertions(+) create mode 100644 drivers/net/bnx2x/ecore_init.h (limited to 'drivers/net/bnx2x/ecore_init.h') diff --git a/drivers/net/bnx2x/ecore_init.h b/drivers/net/bnx2x/ecore_init.h new file mode 100644 index 00000000..d25e2803 --- /dev/null +++ b/drivers/net/bnx2x/ecore_init.h @@ -0,0 +1,819 @@ +/*- + * Copyright (c) 2007-2013 QLogic Corporation. All rights reserved. + * + * Eric Davis + * David Christensen + * Gary Zambrano + * + * Copyright (c) 2013-2015 Brocade Communications Systems, Inc. + * Copyright (c) 2015 QLogic Corporation. + * All rights reserved. + * www.qlogic.com + * + * See LICENSE.bnx2x_pmd for copyright and licensing details. + */ + +#ifndef ECORE_INIT_H +#define ECORE_INIT_H + +/* Init operation types and structures */ +enum { + OP_RD = 0x1, /* read a single register */ + OP_WR, /* write a single register */ + OP_SW, /* copy a string to the device */ + OP_ZR, /* clear memory */ + OP_ZP, /* unzip then copy with DMAE */ + OP_WR_64, /* write 64 bit pattern */ + OP_WB, /* copy a string using DMAE */ + OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */ + OP_IF_MODE_OR, /* Skip the following ops if all init modes don't match */ + OP_IF_MODE_AND, /* Skip the following ops if any init modes don't match */ + OP_IF_PHASE, + OP_RT, + OP_DELAY, + OP_VERIFY, + OP_MAX +}; + +enum { + STAGE_START, + STAGE_END, +}; + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +/* structs for the various opcodes */ +struct raw_op { + uint32_t op:8; + uint32_t offset:24; + uint32_t raw_data; +}; + +struct op_read { + uint32_t op:8; + uint32_t offset:24; + uint32_t val; +}; + +struct op_write { + uint32_t op:8; + uint32_t offset:24; + uint32_t val; +}; + +struct op_arr_write { + uint32_t op:8; + uint32_t offset:24; +#ifdef __BIG_ENDIAN + uint16_t data_len; + uint16_t data_off; +#else /* __LITTLE_ENDIAN */ + uint16_t data_off; + uint16_t data_len; +#endif +}; + +struct op_zero { + uint32_t op:8; + uint32_t offset:24; + uint32_t len; +}; + +struct op_if_mode { + uint32_t op:8; + uint32_t cmd_offset:24; + uint32_t mode_bit_map; +}; + +struct op_if_phase { + uint32_t op:8; + uint32_t cmd_offset:24; + uint32_t phase_bit_map; +}; + +struct op_delay { + uint32_t op:8; + uint32_t reserved:24; + uint32_t delay; +}; + +union init_op { + struct op_read read; + struct op_write write; + struct op_arr_write arr_wr; + struct op_zero zero; + struct raw_op raw; + struct op_if_mode if_mode; + struct op_if_phase if_phase; + struct op_delay delay; +}; + + +/* Init Phases */ +enum { + PHASE_COMMON, + PHASE_PORT0, + PHASE_PORT1, + PHASE_PF0, + PHASE_PF1, + PHASE_PF2, + PHASE_PF3, + PHASE_PF4, + PHASE_PF5, + PHASE_PF6, + PHASE_PF7, + NUM_OF_INIT_PHASES +}; + +/* Init Modes */ +enum { + MODE_ASIC = 0x00000001, + MODE_FPGA = 0x00000002, + MODE_EMUL = 0x00000004, + MODE_E2 = 0x00000008, + MODE_E3 = 0x00000010, + MODE_PORT2 = 0x00000020, + MODE_PORT4 = 0x00000040, + MODE_SF = 0x00000080, + MODE_MF = 0x00000100, + MODE_MF_SD = 0x00000200, + MODE_MF_SI = 0x00000400, + MODE_MF_AFEX = 0x00000800, + MODE_E3_A0 = 0x00001000, + MODE_E3_B0 = 0x00002000, + MODE_COS3 = 0x00004000, + MODE_COS6 = 0x00008000, + MODE_LITTLE_ENDIAN = 0x00010000, + MODE_BIG_ENDIAN = 0x00020000, +}; + +/* Init Blocks */ +enum { + BLOCK_ATC, + BLOCK_BRB1, + BLOCK_CCM, + BLOCK_CDU, + BLOCK_CFC, + BLOCK_CSDM, + BLOCK_CSEM, + BLOCK_DBG, + BLOCK_DMAE, + BLOCK_DORQ, + BLOCK_HC, + BLOCK_IGU, + BLOCK_MISC, + BLOCK_NIG, + BLOCK_PBF, + BLOCK_PGLUE_B, + BLOCK_PRS, + BLOCK_PXP2, + BLOCK_PXP, + BLOCK_QM, + BLOCK_SRC, + BLOCK_TCM, + BLOCK_TM, + BLOCK_TSDM, + BLOCK_TSEM, + BLOCK_UCM, + BLOCK_UPB, + BLOCK_USDM, + BLOCK_USEM, + BLOCK_XCM, + BLOCK_XPB, + BLOCK_XSDM, + BLOCK_XSEM, + BLOCK_MISC_AEU, + NUM_OF_INIT_BLOCKS +}; + + + + + + + + +/* Vnics per mode */ +#define ECORE_PORT2_MODE_NUM_VNICS 4 + + +/* QM queue numbers */ +#define ECORE_ETH_Q 0 +#define ECORE_TOE_Q 3 +#define ECORE_TOE_ACK_Q 6 +#define ECORE_ISCSI_Q 9 +#define ECORE_ISCSI_ACK_Q 11 +#define ECORE_FCOE_Q 10 + +/* Vnics per mode */ +#define ECORE_PORT4_MODE_NUM_VNICS 2 + +/* COS offset for port1 in E3 B0 4port mode */ +#define ECORE_E3B0_PORT1_COS_OFFSET 3 + +/* QM Register addresses */ +#define ECORE_Q_VOQ_REG_ADDR(pf_q_num)\ + (QM_REG_QVOQIDX_0 + 4 * (pf_q_num)) +#define ECORE_VOQ_Q_REG_ADDR(cos, pf_q_num)\ + (QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5))) +#define ECORE_Q_CMDQ_REG_ADDR(pf_q_num)\ + (QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4)) + +/* extracts the QM queue number for the specified port and vnic */ +#define ECORE_PF_Q_NUM(q_num, port, vnic)\ + ((((port) << 1) | (vnic)) * 16 + (q_num)) + + +/* Maps the specified queue to the specified COS */ +static inline void ecore_map_q_cos(struct bnx2x_softc *sc, uint32_t q_num, uint32_t new_cos) +{ + /* find current COS mapping */ + uint32_t curr_cos = REG_RD(sc, QM_REG_QVOQIDX_0 + q_num * 4); + + /* check if queue->COS mapping has changed */ + if (curr_cos != new_cos) { + uint32_t num_vnics = ECORE_PORT2_MODE_NUM_VNICS; + uint32_t reg_addr, reg_bit_map, vnic; + + /* update parameters for 4port mode */ + if (INIT_MODE_FLAGS(sc) & MODE_PORT4) { + num_vnics = ECORE_PORT4_MODE_NUM_VNICS; + if (PORT_ID(sc)) { + curr_cos += ECORE_E3B0_PORT1_COS_OFFSET; + new_cos += ECORE_E3B0_PORT1_COS_OFFSET; + } + } + + /* change queue mapping for each VNIC */ + for (vnic = 0; vnic < num_vnics; vnic++) { + uint32_t pf_q_num = + ECORE_PF_Q_NUM(q_num, PORT_ID(sc), vnic); + uint32_t q_bit_map = 1 << (pf_q_num & 0x1f); + + /* overwrite queue->VOQ mapping */ + REG_WR(sc, ECORE_Q_VOQ_REG_ADDR(pf_q_num), new_cos); + + /* clear queue bit from current COS bit map */ + reg_addr = ECORE_VOQ_Q_REG_ADDR(curr_cos, pf_q_num); + reg_bit_map = REG_RD(sc, reg_addr); + REG_WR(sc, reg_addr, reg_bit_map & (~q_bit_map)); + + /* set queue bit in new COS bit map */ + reg_addr = ECORE_VOQ_Q_REG_ADDR(new_cos, pf_q_num); + reg_bit_map = REG_RD(sc, reg_addr); + REG_WR(sc, reg_addr, reg_bit_map | q_bit_map); + + /* set/clear queue bit in command-queue bit map + (E2/E3A0 only, valid COS values are 0/1) */ + if (!(INIT_MODE_FLAGS(sc) & MODE_E3_B0)) { + reg_addr = ECORE_Q_CMDQ_REG_ADDR(pf_q_num); + reg_bit_map = REG_RD(sc, reg_addr); + q_bit_map = 1 << (2 * (pf_q_num & 0xf)); + reg_bit_map = new_cos ? + (reg_bit_map | q_bit_map) : + (reg_bit_map & (~q_bit_map)); + REG_WR(sc, reg_addr, reg_bit_map); + } + } + } +} + +/* Configures the QM according to the specified per-traffic-type COSes */ +static inline void ecore_dcb_config_qm(struct bnx2x_softc *sc, enum cos_mode mode, + struct priority_cos *traffic_cos) +{ + ecore_map_q_cos(sc, ECORE_FCOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos); + ecore_map_q_cos(sc, ECORE_ISCSI_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + ecore_map_q_cos(sc, ECORE_ISCSI_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + if (mode != STATIC_COS) { + /* required only in OVERRIDE_COS mode */ + ecore_map_q_cos(sc, ECORE_ETH_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + ecore_map_q_cos(sc, ECORE_TOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + ecore_map_q_cos(sc, ECORE_TOE_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + } +} + + +/* + * congestion managment port init api description + * the api works as follows: + * the driver should pass the cmng_init_input struct, the port_init function + * will prepare the required internal ram structure which will be passed back + * to the driver (cmng_init) that will write it into the internal ram. + * + * IMPORTANT REMARKS: + * 1. the cmng_init struct does not represent the contiguous internal ram + * structure. the driver should use the XSTORM_CMNG_PERPORT_VARS_OFFSET + * offset in order to write the port sub struct and the + * PFID_FROM_PORT_AND_VNIC offset for writing the vnic sub struct (in other + * words - don't use memcpy!). + * 2. although the cmng_init struct is filled for the maximal vnic number + * possible, the driver should only write the valid vnics into the internal + * ram according to the appropriate port mode. + */ +#define BITS_TO_BYTES(x) ((x)/8) + +/* CMNG constants, as derived from system spec calculations */ + +/* default MIN rate in case VNIC min rate is configured to zero- 100Mbps */ +#define DEF_MIN_RATE 100 + +/* resolution of the rate shaping timer - 400 usec */ +#define RS_PERIODIC_TIMEOUT_USEC 400 + +/* + * number of bytes in single QM arbitration cycle - + * coefficient for calculating the fairness timer + */ +#define QM_ARB_BYTES 160000 + +/* resolution of Min algorithm 1:100 */ +#define MIN_RES 100 + +/* + * how many bytes above threshold for + * the minimal credit of Min algorithm + */ +#define MIN_ABOVE_THRESH 32768 + +/* + * Fairness algorithm integration time coefficient - + * for calculating the actual Tfair + */ +#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES) + +/* Memory of fairness algorithm - 2 cycles */ +#define FAIR_MEM 2 +#define SAFC_TIMEOUT_USEC 52 + +#define SDM_TICKS 4 + + +static inline void ecore_init_max(const struct cmng_init_input *input_data, + uint32_t r_param, struct cmng_init *ram_data) +{ + uint32_t vnic; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + /* + * rate shaping per-port variables + * 100 micro seconds in SDM ticks = 25 + * since each tick is 4 microSeconds + */ + + pdata->rs_vars.rs_periodic_timeout = + RS_PERIODIC_TIMEOUT_USEC / SDM_TICKS; + + /* this is the threshold below which no timer arming will occur. + * 1.25 coefficient is for the threshold to be a little bigger + * then the real time to compensate for timer in-accuracy + */ + pdata->rs_vars.rs_threshold = + (5 * RS_PERIODIC_TIMEOUT_USEC * r_param)/4; + + /* rate shaping per-vnic variables */ + for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) { + /* global vnic counter */ + vdata->vnic_max_rate[vnic].vn_counter.rate = + input_data->vnic_max_rate[vnic]; + /* + * maximal Mbps for this vnic + * the quota in each timer period - number of bytes + * transmitted in this period + */ + vdata->vnic_max_rate[vnic].vn_counter.quota = + RS_PERIODIC_TIMEOUT_USEC * + (uint32_t)vdata->vnic_max_rate[vnic].vn_counter.rate / 8; + } + +} + +static inline void ecore_init_max_per_vn(uint16_t vnic_max_rate, + struct rate_shaping_vars_per_vn *ram_data) +{ + /* global vnic counter */ + ram_data->vn_counter.rate = vnic_max_rate; + + /* + * maximal Mbps for this vnic + * the quota in each timer period - number of bytes + * transmitted in this period + */ + ram_data->vn_counter.quota = + RS_PERIODIC_TIMEOUT_USEC * (uint32_t)vnic_max_rate / 8; +} + +static inline void ecore_init_min(const struct cmng_init_input *input_data, + uint32_t r_param, struct cmng_init *ram_data) +{ + uint32_t vnic, fair_periodic_timeout_usec, vnicWeightSum, tFair; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + + /* this is the resolution of the fairness timer */ + fair_periodic_timeout_usec = QM_ARB_BYTES / r_param; + + /* + * fairness per-port variables + * for 10G it is 1000usec. for 1G it is 10000usec. + */ + tFair = T_FAIR_COEF / input_data->port_rate; + + /* this is the threshold below which we won't arm the timer anymore */ + pdata->fair_vars.fair_threshold = QM_ARB_BYTES; + + /* + * we multiply by 1e3/8 to get bytes/msec. We don't want the credits + * to pass a credit of the T_FAIR*FAIR_MEM (algorithm resolution) + */ + pdata->fair_vars.upper_bound = r_param * tFair * FAIR_MEM; + + /* since each tick is 4 microSeconds */ + pdata->fair_vars.fairness_timeout = + fair_periodic_timeout_usec / SDM_TICKS; + + /* calculate sum of weights */ + vnicWeightSum = 0; + + for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) + vnicWeightSum += input_data->vnic_min_rate[vnic]; + + /* global vnic counter */ + if (vnicWeightSum > 0) { + /* fairness per-vnic variables */ + for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) { + /* + * this is the credit for each period of the fairness + * algorithm - number of bytes in T_FAIR (this vnic + * share of the port rate) + */ + vdata->vnic_min_rate[vnic].vn_credit_delta = + ((uint32_t)(input_data->vnic_min_rate[vnic]) * 100 * + (T_FAIR_COEF / (8 * 100 * vnicWeightSum))); + if (vdata->vnic_min_rate[vnic].vn_credit_delta < + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH) { + vdata->vnic_min_rate[vnic].vn_credit_delta = + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH; + } + } + } +} + +static inline void ecore_init_fw_wrr(const struct cmng_init_input *input_data, + struct cmng_init *ram_data) +{ + uint32_t vnic, cos; + uint32_t cosWeightSum = 0; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + + for (cos = 0; cos < MAX_COS_NUMBER; cos++) + cosWeightSum += input_data->cos_min_rate[cos]; + + if (cosWeightSum > 0) { + + for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) { + /* + * Since cos and vnic shouldn't work together the rate + * to divide between the coses is the port rate. + */ + uint32_t *ccd = vdata->vnic_min_rate[vnic].cos_credit_delta; + for (cos = 0; cos < MAX_COS_NUMBER; cos++) { + /* + * this is the credit for each period of + * the fairness algorithm - number of bytes + * in T_FAIR (this cos share of the vnic rate) + */ + ccd[cos] = + ((uint32_t)input_data->cos_min_rate[cos] * 100 * + (T_FAIR_COEF / (8 * 100 * cosWeightSum))); + if (ccd[cos] < pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH) { + ccd[cos] = + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH; + } + } + } + } +} + +static inline void ecore_init_safc(struct cmng_init *ram_data) +{ + /* in microSeconds */ + ram_data->port.safc_vars.safc_timeout_usec = SAFC_TIMEOUT_USEC; +} + +/* Congestion management port init */ +static inline void ecore_init_cmng(const struct cmng_init_input *input_data, + struct cmng_init *ram_data) +{ + uint32_t r_param; + ECORE_MEMSET(ram_data, 0,sizeof(struct cmng_init)); + + ram_data->port.flags = input_data->flags; + + /* + * number of bytes transmitted in a rate of 10Gbps + * in one usec = 1.25KB. + */ + r_param = BITS_TO_BYTES(input_data->port_rate); + ecore_init_max(input_data, r_param, ram_data); + ecore_init_min(input_data, r_param, ram_data); + ecore_init_fw_wrr(input_data, ram_data); + ecore_init_safc(ram_data); +} + + + + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +#define INITOP_SET 0 /* set the HW directly */ +#define INITOP_CLEAR 1 /* clear the HW directly */ +#define INITOP_INIT 2 /* set the init-value array */ + +/**************************************************************************** +* ILT management +****************************************************************************/ +struct ilt_line { + ecore_dma_addr_t page_mapping; + void *page; + uint32_t size; +}; + +struct ilt_client_info { + uint32_t page_size; + uint16_t start; + uint16_t end; + uint16_t client_num; + uint16_t flags; +#define ILT_CLIENT_SKIP_INIT 0x1 +#define ILT_CLIENT_SKIP_MEM 0x2 +}; + +struct ecore_ilt { + uint32_t start_line; + struct ilt_line *lines; + struct ilt_client_info clients[4]; +#define ILT_CLIENT_CDU 0 +#define ILT_CLIENT_QM 1 +#define ILT_CLIENT_SRC 2 +#define ILT_CLIENT_TM 3 +}; + +/**************************************************************************** +* SRC configuration +****************************************************************************/ +struct src_ent { + uint8_t opaque[56]; + uint64_t next; +}; + +/**************************************************************************** +* Parity configuration +****************************************************************************/ +#define BLOCK_PRTY_INFO(block, en_mask, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK, \ + block##_REG_##block##_PRTY_STS_CLR, \ + en_mask, {m1h, m2, m3}, #block \ +} + +#define BLOCK_PRTY_INFO_0(block, en_mask, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_0, \ + block##_REG_##block##_PRTY_STS_CLR_0, \ + en_mask, {m1h, m2, m3}, #block"_0" \ +} + +#define BLOCK_PRTY_INFO_1(block, en_mask, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_1, \ + block##_REG_##block##_PRTY_STS_CLR_1, \ + en_mask, {m1h, m2, m3}, #block"_1" \ +} + +static const struct { + uint32_t mask_addr; + uint32_t sts_clr_addr; + uint32_t en_mask; /* Mask to enable parity attentions */ + struct { + uint32_t e1h; /* 57711 */ + uint32_t e2; /* 57712 */ + uint32_t e3; /* 578xx */ + } reg_mask; /* Register mask (all valid bits) */ + char name[8]; /* Block's longest name is 7 characters long + * (name + suffix) + */ +} ecore_blocks_parity_data[] = { + /* bit 19 masked */ + /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */ + /* bit 5,18,20-31 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */ + /* bit 5 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */ + /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */ + /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */ + + /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't + * want to handle "system kill" flow at the moment. + */ + BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x7ffffff, + 0x7ffffff), + BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(PXP2, 0x1ffffff, 0x7f, 0x7ff, 0x1ffffff), + BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0, 0), + BLOCK_PRTY_INFO(NIG, 0xffffffff, 0xffffffff, 0, 0), + BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0xff, 0xffff), + BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(QM, 0, 0xfff, 0xfff, 0xfff), + BLOCK_PRTY_INFO(ATC, 0x1f, 0, 0x1f, 0x1f), + BLOCK_PRTY_INFO(PGLUE_B, 0x3, 0, 0x3, 0x3), + BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3), + {GRCBASE_UPB + PB_REG_PB_PRTY_MASK, + GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf, + {0xf, 0xf, 0xf}, "UPB"}, + {GRCBASE_XPB + PB_REG_PB_PRTY_MASK, + GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0, + {0xf, 0xf, 0xf}, "XPB"}, + BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7), + BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0x3f), + BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff), + BLOCK_PRTY_INFO(PBF, 0, 0x3ffff, 0xfffff, 0xfffffff), + BLOCK_PRTY_INFO(TM, 0, 0x7f, 0x7f, 0x7f), + BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(TCM, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(CCM, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(UCM, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(XCM, 0, 0x3fffffff, 0x3fffffff, 0x3fffffff), + BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(TSEM, 0, 0x1f, 0x3f, 0x3f), + BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(USEM, 0, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(CSEM, 0, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(XSEM, 0, 0x1f, 0x3f, 0x3f), +}; + + +/* [28] MCP Latched rom_parity + * [29] MCP Latched ump_rx_parity + * [30] MCP Latched ump_tx_parity + * [31] MCP Latched scpad_parity + */ +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) + +/* Below registers control the MCP parity attention output. When + * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are + * enabled, when cleared - disabled. + */ +static const uint32_t mcp_attn_ctl_regs[] = { + MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_REG_AEU_ENABLE4_NIG_0, + MISC_REG_AEU_ENABLE4_PXP_0, + MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_REG_AEU_ENABLE4_NIG_1, + MISC_REG_AEU_ENABLE4_PXP_1 +}; + +static inline void ecore_set_mcp_parity(struct bnx2x_softc *sc, uint8_t enable) +{ + uint32_t i; + uint32_t reg_val; + + for (i = 0; i < ARRSIZE(mcp_attn_ctl_regs); i++) { + reg_val = REG_RD(sc, mcp_attn_ctl_regs[i]); + + if (enable) + reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; + else + reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; + + REG_WR(sc, mcp_attn_ctl_regs[i], reg_val); + } +} + +static inline uint32_t ecore_parity_reg_mask(struct bnx2x_softc *sc, int idx) +{ + if (CHIP_IS_E1H(sc)) + return ecore_blocks_parity_data[idx].reg_mask.e1h; + else if (CHIP_IS_E2(sc)) + return ecore_blocks_parity_data[idx].reg_mask.e2; + else /* CHIP_IS_E3 */ + return ecore_blocks_parity_data[idx].reg_mask.e3; +} + +static inline void ecore_disable_blocks_parity(struct bnx2x_softc *sc) +{ + uint32_t i; + + for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) { + uint32_t dis_mask = ecore_parity_reg_mask(sc, i); + + if (dis_mask) { + REG_WR(sc, ecore_blocks_parity_data[i].mask_addr, + dis_mask); + ECORE_MSG("Setting parity mask " + "for %s to\t\t0x%x", + ecore_blocks_parity_data[i].name, dis_mask); + } + } + + /* Disable MCP parity attentions */ + ecore_set_mcp_parity(sc, FALSE); +} + +/** + * Clear the parity error status registers. + */ +static inline void ecore_clear_blocks_parity(struct bnx2x_softc *sc) +{ + uint32_t i; + uint32_t reg_val, mcp_aeu_bits = + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY; + + /* Clear SEM_FAST parities */ + REG_WR(sc, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(sc, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(sc, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(sc, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + + for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) { + uint32_t reg_mask = ecore_parity_reg_mask(sc, i); + + if (reg_mask) { + reg_val = REG_RD(sc, ecore_blocks_parity_data[i]. + sts_clr_addr); + if (reg_val & reg_mask) + ECORE_MSG("Parity errors in %s: 0x%x", + ecore_blocks_parity_data[i].name, + reg_val & reg_mask); + } + } + + /* Check if there were parity attentions in MCP */ + reg_val = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_MCP); + if (reg_val & mcp_aeu_bits) + ECORE_MSG("Parity error in MCP: 0x%x", + reg_val & mcp_aeu_bits); + + /* Clear parity attentions in MCP: + * [7] clears Latched rom_parity + * [8] clears Latched ump_rx_parity + * [9] clears Latched ump_tx_parity + * [10] clears Latched scpad_parity (both ports) + */ + REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780); +} + +static inline void ecore_enable_blocks_parity(struct bnx2x_softc *sc) +{ + uint32_t i; + + for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) { + uint32_t reg_mask = ecore_parity_reg_mask(sc, i); + + if (reg_mask) + REG_WR(sc, ecore_blocks_parity_data[i].mask_addr, + ecore_blocks_parity_data[i].en_mask & reg_mask); + } + + /* Enable MCP parity attentions */ + ecore_set_mcp_parity(sc, TRUE); +} + + +#endif /* ECORE_INIT_H */ -- cgit 1.2.3-korg