From f239aed5e674965691846e8ce3f187dd47523689 Mon Sep 17 00:00:00 2001 From: Luca Boccassi Date: Wed, 16 Aug 2017 18:42:05 +0100 Subject: New upstream version 17.08 Change-Id: I288b50990f52646089d6b1f3aaa6ba2f091a51d7 Signed-off-by: Luca Boccassi --- drivers/net/i40e/base/virtchnl.h | 772 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 772 insertions(+) create mode 100644 drivers/net/i40e/base/virtchnl.h (limited to 'drivers/net/i40e/base/virtchnl.h') diff --git a/drivers/net/i40e/base/virtchnl.h b/drivers/net/i40e/base/virtchnl.h new file mode 100644 index 00000000..f00dd360 --- /dev/null +++ b/drivers/net/i40e/base/virtchnl.h @@ -0,0 +1,772 @@ +/******************************************************************************* + +Copyright (c) 2013 - 2015, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + +#ifndef _VIRTCHNL_H_ +#define _VIRTCHNL_H_ + +/* Description: + * This header file describes the VF-PF communication protocol used + * by the drivers for all devices starting from our 40G product line + * + * Admin queue buffer usage: + * desc->opcode is always aqc_opc_send_msg_to_pf + * flags, retval, datalen, and data addr are all used normally. + * The Firmware copies the cookie fields when sending messages between the + * PF and VF, but uses all other fields internally. Due to this limitation, + * we must send all messages as "indirect", i.e. using an external buffer. + * + * All the VSI indexes are relative to the VF. Each VF can have maximum of + * three VSIs. All the queue indexes are relative to the VSI. Each VF can + * have a maximum of sixteen queues for all of its VSIs. + * + * The PF is required to return a status code in v_retval for all messages + * except RESET_VF, which does not require any response. The return value + * is of status_code type, defined in the shared type.h. + * + * In general, VF driver initialization should roughly follow the order of + * these opcodes. The VF driver must first validate the API version of the + * PF driver, then request a reset, then get resources, then configure + * queues and interrupts. After these operations are complete, the VF + * driver may start its queues, optionally add MAC and VLAN filters, and + * process traffic. + */ + +/* START GENERIC DEFINES + * Need to ensure the following enums and defines hold the same meaning and + * value in current and future projects + */ + +/* Error Codes */ +enum virtchnl_status_code { + VIRTCHNL_STATUS_SUCCESS = 0, + VIRTCHNL_ERR_PARAM = -5, + VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38, + VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39, + VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40, + VIRTCHNL_STATUS_NOT_SUPPORTED = -64, +}; + +#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1 +#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2 +#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3 +#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4 +#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5 +#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6 + +enum virtchnl_link_speed { + VIRTCHNL_LINK_SPEED_UNKNOWN = 0, + VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT), + VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT), + VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT), + VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT), + VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT), + VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT), +}; + +/* for hsplit_0 field of Rx HMC context */ +/* deprecated with AVF 1.0 */ +enum virtchnl_rx_hsplit { + VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0, + VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1, + VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2, + VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4, + VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8, +}; + +#define VIRTCHNL_ETH_LENGTH_OF_ADDRESS 6 +/* END GENERIC DEFINES */ + +/* Opcodes for VF-PF communication. These are placed in the v_opcode field + * of the virtchnl_msg structure. + */ +enum virtchnl_ops { +/* The PF sends status change events to VFs using + * the VIRTCHNL_OP_EVENT opcode. + * VFs send requests to the PF using the other ops. + * Use of "advanced opcode" features must be negotiated as part of capabilities + * exchange and are not considered part of base mode feature set. + */ + VIRTCHNL_OP_UNKNOWN = 0, + VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */ + VIRTCHNL_OP_RESET_VF = 2, + VIRTCHNL_OP_GET_VF_RESOURCES = 3, + VIRTCHNL_OP_CONFIG_TX_QUEUE = 4, + VIRTCHNL_OP_CONFIG_RX_QUEUE = 5, + VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6, + VIRTCHNL_OP_CONFIG_IRQ_MAP = 7, + VIRTCHNL_OP_ENABLE_QUEUES = 8, + VIRTCHNL_OP_DISABLE_QUEUES = 9, + VIRTCHNL_OP_ADD_ETH_ADDR = 10, + VIRTCHNL_OP_DEL_ETH_ADDR = 11, + VIRTCHNL_OP_ADD_VLAN = 12, + VIRTCHNL_OP_DEL_VLAN = 13, + VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14, + VIRTCHNL_OP_GET_STATS = 15, + VIRTCHNL_OP_RSVD = 16, + VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */ +#ifdef VIRTCHNL_SOL_VF_SUPPORT + VIRTCHNL_OP_GET_ADDNL_SOL_CONFIG = 19, +#endif +#ifdef VIRTCHNL_IWARP + VIRTCHNL_OP_IWARP = 20, /* advanced opcode */ + VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */ + VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */ +#endif + VIRTCHNL_OP_CONFIG_RSS_KEY = 23, + VIRTCHNL_OP_CONFIG_RSS_LUT = 24, + VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25, + VIRTCHNL_OP_SET_RSS_HENA = 26, + VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27, + VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28, + VIRTCHNL_OP_REQUEST_QUEUES = 29, + +}; + +/* This macro is used to generate a compilation error if a structure + * is not exactly the correct length. It gives a divide by zero error if the + * structure is not of the correct size, otherwise it creates an enum that is + * never used. + */ +#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \ + {virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0)} + +/* Virtual channel message descriptor. This overlays the admin queue + * descriptor. All other data is passed in external buffers. + */ + +struct virtchnl_msg { + u8 pad[8]; /* AQ flags/opcode/len/retval fields */ + enum virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */ + enum virtchnl_status_code v_retval; /* ditto for desc->retval */ + u32 vfid; /* used by PF when sending to VF */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg); + +/* Message descriptions and data structures.*/ + +/* VIRTCHNL_OP_VERSION + * VF posts its version number to the PF. PF responds with its version number + * in the same format, along with a return code. + * Reply from PF has its major/minor versions also in param0 and param1. + * If there is a major version mismatch, then the VF cannot operate. + * If there is a minor version mismatch, then the VF can operate but should + * add a warning to the system log. + * + * This enum element MUST always be specified as == 1, regardless of other + * changes in the API. The PF must always respond to this message without + * error regardless of version mismatch. + */ +#define VIRTCHNL_VERSION_MAJOR 1 +#define VIRTCHNL_VERSION_MINOR 1 +#define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0 + +struct virtchnl_version_info { + u32 major; + u32 minor; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info); + +#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0)) +#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1)) + +/* VIRTCHNL_OP_RESET_VF + * VF sends this request to PF with no parameters + * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register + * until reset completion is indicated. The admin queue must be reinitialized + * after this operation. + * + * When reset is complete, PF must ensure that all queues in all VSIs associated + * with the VF are stopped, all queue configurations in the HMC are set to 0, + * and all MAC and VLAN filters (except the default MAC address) on all VSIs + * are cleared. + */ + +/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV + * vsi_type should always be 6 for backward compatibility. Add other fields + * as needed. + */ +enum virtchnl_vsi_type { + VIRTCHNL_VSI_TYPE_INVALID = 0, + VIRTCHNL_VSI_SRIOV = 6, +}; + +/* VIRTCHNL_OP_GET_VF_RESOURCES + * Version 1.0 VF sends this request to PF with no parameters + * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities + * PF responds with an indirect message containing + * virtchnl_vf_resource and one or more + * virtchnl_vsi_resource structures. + */ + +struct virtchnl_vsi_resource { + u16 vsi_id; + u16 num_queue_pairs; + enum virtchnl_vsi_type vsi_type; + u16 qset_handle; + u8 default_mac_addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource); + +/* VF offload flags + * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including + * TX/RX Checksum offloading and TSO for non-tunnelled packets. + */ +#define VIRTCHNL_VF_OFFLOAD_L2 0x00000001 +#define VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002 +#define VIRTCHNL_VF_OFFLOAD_RSVD 0x00000004 +#define VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008 +#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010 +#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020 +#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040 +#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000 +#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000 +#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000 +#define VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000 +#define VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000 +#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000 +#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM 0X00400000 + +#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \ + VIRTCHNL_VF_OFFLOAD_VLAN | \ + VIRTCHNL_VF_OFFLOAD_RSS_PF) + +struct virtchnl_vf_resource { + u16 num_vsis; + u16 num_queue_pairs; + u16 max_vectors; + u16 max_mtu; + + u32 vf_offload_flags; + u32 rss_key_size; + u32 rss_lut_size; + + struct virtchnl_vsi_resource vsi_res[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource); + +/* VIRTCHNL_OP_CONFIG_TX_QUEUE + * VF sends this message to set up parameters for one TX queue. + * External data buffer contains one instance of virtchnl_txq_info. + * PF configures requested queue and returns a status code. + */ + +/* Tx queue config info */ +struct virtchnl_txq_info { + u16 vsi_id; + u16 queue_id; + u16 ring_len; /* number of descriptors, multiple of 8 */ + u16 headwb_enabled; /* deprecated with AVF 1.0 */ + u64 dma_ring_addr; + u64 dma_headwb_addr; /* deprecated with AVF 1.0 */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info); + +/* VIRTCHNL_OP_CONFIG_RX_QUEUE + * VF sends this message to set up parameters for one RX queue. + * External data buffer contains one instance of virtchnl_rxq_info. + * PF configures requested queue and returns a status code. + */ + +/* Rx queue config info */ +struct virtchnl_rxq_info { + u16 vsi_id; + u16 queue_id; + u32 ring_len; /* number of descriptors, multiple of 32 */ + u16 hdr_size; + u16 splithdr_enabled; /* deprecated with AVF 1.0 */ + u32 databuffer_size; + u32 max_pkt_size; + u32 pad1; + u64 dma_ring_addr; + enum virtchnl_rx_hsplit rx_split_pos; /* deprecated with AVF 1.0 */ + u32 pad2; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info); + +/* VIRTCHNL_OP_CONFIG_VSI_QUEUES + * VF sends this message to set parameters for all active TX and RX queues + * associated with the specified VSI. + * PF configures queues and returns status. + * If the number of queues specified is greater than the number of queues + * associated with the VSI, an error is returned and no queues are configured. + */ +struct virtchnl_queue_pair_info { + /* NOTE: vsi_id and queue_id should be identical for both queues. */ + struct virtchnl_txq_info txq; + struct virtchnl_rxq_info rxq; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info); + +struct virtchnl_vsi_queue_config_info { + u16 vsi_id; + u16 num_queue_pairs; + u32 pad; + struct virtchnl_queue_pair_info qpair[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info); + +/* VIRTCHNL_OP_REQUEST_QUEUES + * VF sends this message to request the PF to allocate additional queues to + * this VF. Each VF gets a guaranteed number of queues on init but asking for + * additional queues must be negotiated. This is a best effort request as it + * is possible the PF does not have enough queues left to support the request. + * If the PF cannot support the number requested it will respond with the + * maximum number it is able to support; otherwise it will respond with the + * number requested. + */ + +/* VF resource request */ +struct virtchnl_vf_res_request { + u16 num_queue_pairs; +}; + +/* VIRTCHNL_OP_CONFIG_IRQ_MAP + * VF uses this message to map vectors to queues. + * The rxq_map and txq_map fields are bitmaps used to indicate which queues + * are to be associated with the specified vector. + * The "other" causes are always mapped to vector 0. + * PF configures interrupt mapping and returns status. + */ +struct virtchnl_vector_map { + u16 vsi_id; + u16 vector_id; + u16 rxq_map; + u16 txq_map; + u16 rxitr_idx; + u16 txitr_idx; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map); + +struct virtchnl_irq_map_info { + u16 num_vectors; + struct virtchnl_vector_map vecmap[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info); + +/* VIRTCHNL_OP_ENABLE_QUEUES + * VIRTCHNL_OP_DISABLE_QUEUES + * VF sends these message to enable or disable TX/RX queue pairs. + * The queues fields are bitmaps indicating which queues to act upon. + * (Currently, we only support 16 queues per VF, but we make the field + * u32 to allow for expansion.) + * PF performs requested action and returns status. + */ +struct virtchnl_queue_select { + u16 vsi_id; + u16 pad; + u32 rx_queues; + u32 tx_queues; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select); + +/* VIRTCHNL_OP_ADD_ETH_ADDR + * VF sends this message in order to add one or more unicast or multicast + * address filters for the specified VSI. + * PF adds the filters and returns status. + */ + +/* VIRTCHNL_OP_DEL_ETH_ADDR + * VF sends this message in order to remove one or more unicast or multicast + * filters for the specified VSI. + * PF removes the filters and returns status. + */ + +struct virtchnl_ether_addr { + u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS]; + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr); + +struct virtchnl_ether_addr_list { + u16 vsi_id; + u16 num_elements; + struct virtchnl_ether_addr list[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list); + +#ifdef VIRTCHNL_SOL_VF_SUPPORT +/* VIRTCHNL_OP_GET_ADDNL_SOL_CONFIG + * VF sends this message to get the default MTU and list of additional ethernet + * addresses it is allowed to use. + * PF responds with an indirect message containing + * virtchnl_addnl_solaris_config with zero or more + * virtchnl_ether_addr structures. + * + * It is expected that this operation will only ever be needed for Solaris VFs + * running under a Solaris PF. + */ +struct virtchnl_addnl_solaris_config { + u16 default_mtu; + struct virtchnl_ether_addr_list al; +}; + +#endif +/* VIRTCHNL_OP_ADD_VLAN + * VF sends this message to add one or more VLAN tag filters for receives. + * PF adds the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +/* VIRTCHNL_OP_DEL_VLAN + * VF sends this message to remove one or more VLAN tag filters for receives. + * PF removes the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +struct virtchnl_vlan_filter_list { + u16 vsi_id; + u16 num_elements; + u16 vlan_id[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list); + +/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE + * VF sends VSI id and flags. + * PF returns status code in retval. + * Note: we assume that broadcast accept mode is always enabled. + */ +struct virtchnl_promisc_info { + u16 vsi_id; + u16 flags; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info); + +#define FLAG_VF_UNICAST_PROMISC 0x00000001 +#define FLAG_VF_MULTICAST_PROMISC 0x00000002 + +/* VIRTCHNL_OP_GET_STATS + * VF sends this message to request stats for the selected VSI. VF uses + * the virtchnl_queue_select struct to specify the VSI. The queue_id + * field is ignored by the PF. + * + * PF replies with struct eth_stats in an external buffer. + */ + +/* VIRTCHNL_OP_CONFIG_RSS_KEY + * VIRTCHNL_OP_CONFIG_RSS_LUT + * VF sends these messages to configure RSS. Only supported if both PF + * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during + * configuration negotiation. If this is the case, then the RSS fields in + * the VF resource struct are valid. + * Both the key and LUT are initialized to 0 by the PF, meaning that + * RSS is effectively disabled until set up by the VF. + */ +struct virtchnl_rss_key { + u16 vsi_id; + u16 key_len; + u8 key[1]; /* RSS hash key, packed bytes */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key); + +struct virtchnl_rss_lut { + u16 vsi_id; + u16 lut_entries; + u8 lut[1]; /* RSS lookup table*/ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut); + +/* VIRTCHNL_OP_GET_RSS_HENA_CAPS + * VIRTCHNL_OP_SET_RSS_HENA + * VF sends these messages to get and set the hash filter enable bits for RSS. + * By default, the PF sets these to all possible traffic types that the + * hardware supports. The VF can query this value if it wants to change the + * traffic types that are hashed by the hardware. + */ +struct virtchnl_rss_hena { + u64 hena; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena); + +/* VIRTCHNL_OP_EVENT + * PF sends this message to inform the VF driver of events that may affect it. + * No direct response is expected from the VF, though it may generate other + * messages in response to this one. + */ +enum virtchnl_event_codes { + VIRTCHNL_EVENT_UNKNOWN = 0, + VIRTCHNL_EVENT_LINK_CHANGE, + VIRTCHNL_EVENT_RESET_IMPENDING, + VIRTCHNL_EVENT_PF_DRIVER_CLOSE, +}; + +#define PF_EVENT_SEVERITY_INFO 0 +#define PF_EVENT_SEVERITY_ATTENTION 1 +#define PF_EVENT_SEVERITY_ACTION_REQUIRED 2 +#define PF_EVENT_SEVERITY_CERTAIN_DOOM 255 + +struct virtchnl_pf_event { + enum virtchnl_event_codes event; + union { + struct { + enum virtchnl_link_speed link_speed; + bool link_status; + } link_event; + } event_data; + + int severity; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event); + +#ifdef VIRTCHNL_IWARP + +/* VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP + * VF uses this message to request PF to map IWARP vectors to IWARP queues. + * The request for this originates from the VF IWARP driver through + * a client interface between VF LAN and VF IWARP driver. + * A vector could have an AEQ and CEQ attached to it although + * there is a single AEQ per VF IWARP instance in which case + * most vectors will have an INVALID_IDX for aeq and valid idx for ceq. + * There will never be a case where there will be multiple CEQs attached + * to a single vector. + * PF configures interrupt mapping and returns status. + */ + +/* HW does not define a type value for AEQ; only for RX/TX and CEQ. + * In order for us to keep the interface simple, SW will define a + * unique type value for AEQ. + */ +#define QUEUE_TYPE_PE_AEQ 0x80 +#define QUEUE_INVALID_IDX 0xFFFF + +struct virtchnl_iwarp_qv_info { + u32 v_idx; /* msix_vector */ + u16 ceq_idx; + u16 aeq_idx; + u8 itr_idx; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info); + +struct virtchnl_iwarp_qvlist_info { + u32 num_vectors; + struct virtchnl_iwarp_qv_info qv_info[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info); + +#endif + +/* VF reset states - these are written into the RSTAT register: + * VFGEN_RSTAT on the VF + * When the PF initiates a reset, it writes 0 + * When the reset is complete, it writes 1 + * When the PF detects that the VF has recovered, it writes 2 + * VF checks this register periodically to determine if a reset has occurred, + * then polls it to know when the reset is complete. + * If either the PF or VF reads the register while the hardware + * is in a reset state, it will return DEADBEEF, which, when masked + * will result in 3. + */ +enum virtchnl_vfr_states { + VIRTCHNL_VFR_INPROGRESS = 0, + VIRTCHNL_VFR_COMPLETED, + VIRTCHNL_VFR_VFACTIVE, +}; + +/** + * virtchnl_vc_validate_vf_msg + * @ver: Virtchnl version info + * @v_opcode: Opcode for the message + * @msg: pointer to the msg buffer + * @msglen: msg length + * + * validate msg format against struct for each opcode + */ +static inline int +virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode, + u8 *msg, u16 msglen) +{ + bool err_msg_format = false; + int valid_len = 0; + + /* Validate message length. */ + switch (v_opcode) { + case VIRTCHNL_OP_VERSION: + valid_len = sizeof(struct virtchnl_version_info); + break; + case VIRTCHNL_OP_RESET_VF: + break; + case VIRTCHNL_OP_GET_VF_RESOURCES: + if (VF_IS_V11(ver)) + valid_len = sizeof(u32); + break; + case VIRTCHNL_OP_CONFIG_TX_QUEUE: + valid_len = sizeof(struct virtchnl_txq_info); + break; + case VIRTCHNL_OP_CONFIG_RX_QUEUE: + valid_len = sizeof(struct virtchnl_rxq_info); + break; + case VIRTCHNL_OP_CONFIG_VSI_QUEUES: + valid_len = sizeof(struct virtchnl_vsi_queue_config_info); + if (msglen >= valid_len) { + struct virtchnl_vsi_queue_config_info *vqc = + (struct virtchnl_vsi_queue_config_info *)msg; + valid_len += (vqc->num_queue_pairs * + sizeof(struct + virtchnl_queue_pair_info)); + if (vqc->num_queue_pairs == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_CONFIG_IRQ_MAP: + valid_len = sizeof(struct virtchnl_irq_map_info); + if (msglen >= valid_len) { + struct virtchnl_irq_map_info *vimi = + (struct virtchnl_irq_map_info *)msg; + valid_len += (vimi->num_vectors * + sizeof(struct virtchnl_vector_map)); + if (vimi->num_vectors == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_ENABLE_QUEUES: + case VIRTCHNL_OP_DISABLE_QUEUES: + valid_len = sizeof(struct virtchnl_queue_select); + break; + case VIRTCHNL_OP_ADD_ETH_ADDR: + case VIRTCHNL_OP_DEL_ETH_ADDR: + valid_len = sizeof(struct virtchnl_ether_addr_list); + if (msglen >= valid_len) { + struct virtchnl_ether_addr_list *veal = + (struct virtchnl_ether_addr_list *)msg; + valid_len += veal->num_elements * + sizeof(struct virtchnl_ether_addr); + if (veal->num_elements == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_ADD_VLAN: + case VIRTCHNL_OP_DEL_VLAN: + valid_len = sizeof(struct virtchnl_vlan_filter_list); + if (msglen >= valid_len) { + struct virtchnl_vlan_filter_list *vfl = + (struct virtchnl_vlan_filter_list *)msg; + valid_len += vfl->num_elements * sizeof(u16); + if (vfl->num_elements == 0) + err_msg_format = true; + } + break; + case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE: + valid_len = sizeof(struct virtchnl_promisc_info); + break; + case VIRTCHNL_OP_GET_STATS: + valid_len = sizeof(struct virtchnl_queue_select); + break; +#ifdef VIRTCHNL_IWARP + case VIRTCHNL_OP_IWARP: + /* These messages are opaque to us and will be validated in + * the RDMA client code. We just need to check for nonzero + * length. The firmware will enforce max length restrictions. + */ + if (msglen) + valid_len = msglen; + else + err_msg_format = true; + break; + case VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP: + break; + case VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP: + valid_len = sizeof(struct virtchnl_iwarp_qvlist_info); + if (msglen >= valid_len) { + struct virtchnl_iwarp_qvlist_info *qv = + (struct virtchnl_iwarp_qvlist_info *)msg; + if (qv->num_vectors == 0) { + err_msg_format = true; + break; + } + valid_len += ((qv->num_vectors - 1) * + sizeof(struct virtchnl_iwarp_qv_info)); + } + break; +#endif + case VIRTCHNL_OP_CONFIG_RSS_KEY: + valid_len = sizeof(struct virtchnl_rss_key); + if (msglen >= valid_len) { + struct virtchnl_rss_key *vrk = + (struct virtchnl_rss_key *)msg; + valid_len += vrk->key_len - 1; + } + break; + case VIRTCHNL_OP_CONFIG_RSS_LUT: + valid_len = sizeof(struct virtchnl_rss_lut); + if (msglen >= valid_len) { + struct virtchnl_rss_lut *vrl = + (struct virtchnl_rss_lut *)msg; + valid_len += vrl->lut_entries - 1; + } + break; + case VIRTCHNL_OP_GET_RSS_HENA_CAPS: + break; + case VIRTCHNL_OP_SET_RSS_HENA: + valid_len = sizeof(struct virtchnl_rss_hena); + break; + case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING: + case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING: + break; + case VIRTCHNL_OP_REQUEST_QUEUES: + valid_len = sizeof(struct virtchnl_vf_res_request); + break; + /* These are always errors coming from the VF. */ + case VIRTCHNL_OP_EVENT: + case VIRTCHNL_OP_UNKNOWN: + default: + return VIRTCHNL_ERR_PARAM; + } + /* few more checks */ + if ((valid_len != msglen) || (err_msg_format)) + return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH; + + return 0; +} +#endif /* _VIRTCHNL_H_ */ -- cgit 1.2.3-korg