From 5129044dce1f85ce4950f31bcf90f3886466f06a Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:54:47 -0700 Subject: Imported upstream release 16.04 * gbp import-orig ../dpdk-16.04.tar.xz Change-Id: Iac2196db782ba322f6974d8a752acc34ce5024c3 Signed-off-by: C.J. Collier --- drivers/net/ixgbe/base/ixgbe_vf.c | 726 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 726 insertions(+) create mode 100644 drivers/net/ixgbe/base/ixgbe_vf.c (limited to 'drivers/net/ixgbe/base/ixgbe_vf.c') diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c new file mode 100644 index 00000000..40dc1c8c --- /dev/null +++ b/drivers/net/ixgbe/base/ixgbe_vf.c @@ -0,0 +1,726 @@ +/******************************************************************************* + +Copyright (c) 2001-2015, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + + +#include "ixgbe_api.h" +#include "ixgbe_type.h" +#include "ixgbe_vf.h" + +#ifndef IXGBE_VFWRITE_REG +#define IXGBE_VFWRITE_REG IXGBE_WRITE_REG +#endif +#ifndef IXGBE_VFREAD_REG +#define IXGBE_VFREAD_REG IXGBE_READ_REG +#endif + +/** + * ixgbe_init_ops_vf - Initialize the pointers for vf + * @hw: pointer to hardware structure + * + * This will assign function pointers, adapter-specific functions can + * override the assignment of generic function pointers by assigning + * their own adapter-specific function pointers. + * Does not touch the hardware. + **/ +s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw) +{ + /* MAC */ + hw->mac.ops.init_hw = ixgbe_init_hw_vf; + hw->mac.ops.reset_hw = ixgbe_reset_hw_vf; + hw->mac.ops.start_hw = ixgbe_start_hw_vf; + /* Cannot clear stats on VF */ + hw->mac.ops.clear_hw_cntrs = NULL; + hw->mac.ops.get_media_type = NULL; + hw->mac.ops.get_mac_addr = ixgbe_get_mac_addr_vf; + hw->mac.ops.stop_adapter = ixgbe_stop_adapter_vf; + hw->mac.ops.get_bus_info = NULL; + + /* Link */ + hw->mac.ops.setup_link = ixgbe_setup_mac_link_vf; + hw->mac.ops.check_link = ixgbe_check_mac_link_vf; + hw->mac.ops.get_link_capabilities = NULL; + + /* RAR, Multicast, VLAN */ + hw->mac.ops.set_rar = ixgbe_set_rar_vf; + hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf; + hw->mac.ops.init_rx_addrs = NULL; + hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf; + hw->mac.ops.enable_mc = NULL; + hw->mac.ops.disable_mc = NULL; + hw->mac.ops.clear_vfta = NULL; + hw->mac.ops.set_vfta = ixgbe_set_vfta_vf; + + hw->mac.max_tx_queues = 1; + hw->mac.max_rx_queues = 1; + + hw->mbx.ops.init_params = ixgbe_init_mbx_params_vf; + + return IXGBE_SUCCESS; +} + +/* ixgbe_virt_clr_reg - Set register to default (power on) state. + * @hw: pointer to hardware structure + */ +static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw) +{ + int i; + u32 vfsrrctl; + u32 vfdca_rxctrl; + u32 vfdca_txctrl; + + /* VRSRRCTL default values (BSIZEPACKET = 2048, BSIZEHEADER = 256) */ + vfsrrctl = 0x100 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT; + vfsrrctl |= 0x800 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + + /* DCA_RXCTRL default value */ + vfdca_rxctrl = IXGBE_DCA_RXCTRL_DESC_RRO_EN | + IXGBE_DCA_RXCTRL_DATA_WRO_EN | + IXGBE_DCA_RXCTRL_HEAD_WRO_EN; + + /* DCA_TXCTRL default value */ + vfdca_txctrl = IXGBE_DCA_TXCTRL_DESC_RRO_EN | + IXGBE_DCA_TXCTRL_DESC_WRO_EN | + IXGBE_DCA_TXCTRL_DATA_RRO_EN; + + IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0); + + for (i = 0; i < 7; i++) { + IXGBE_WRITE_REG(hw, IXGBE_VFRDH(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), vfsrrctl); + IXGBE_WRITE_REG(hw, IXGBE_VFTDH(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTDT(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAH(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFDCA_RXCTRL(i), vfdca_rxctrl); + IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), vfdca_txctrl); + } + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized + **/ +s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw) +{ + /* Clear adapter stopped flag */ + hw->adapter_stopped = false; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_init_hw_vf - virtual function hardware initialization + * @hw: pointer to hardware structure + * + * Initialize the hardware by resetting the hardware and then starting + * the hardware + **/ +s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw) +{ + s32 status = hw->mac.ops.start_hw(hw); + + hw->mac.ops.get_mac_addr(hw, hw->mac.addr); + + return status; +} + +/** + * ixgbe_reset_hw_vf - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by reseting the transmit and receive units, masks and + * clears all interrupts. + **/ +s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 timeout = IXGBE_VF_INIT_TIMEOUT; + s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR; + u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN]; + u8 *addr = (u8 *)(&msgbuf[1]); + + DEBUGFUNC("ixgbevf_reset_hw_vf"); + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* reset the api version */ + hw->api_version = ixgbe_mbox_api_10; + + DEBUGOUT("Issuing a function level reset to MAC\n"); + + IXGBE_VFWRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST); + IXGBE_WRITE_FLUSH(hw); + + msec_delay(50); + + /* we cannot reset while the RSTI / RSTD bits are asserted */ + while (!mbx->ops.check_for_rst(hw, 0) && timeout) { + timeout--; + usec_delay(5); + } + + if (!timeout) + return IXGBE_ERR_RESET_FAILED; + + /* Reset VF registers to initial values */ + ixgbe_virt_clr_reg(hw); + + /* mailbox timeout can now become active */ + mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT; + + msgbuf[0] = IXGBE_VF_RESET; + mbx->ops.write_posted(hw, msgbuf, 1, 0); + + msec_delay(10); + + /* + * set our "perm_addr" based on info provided by PF + * also set up the mc_filter_type which is piggy backed + * on the mac address in word 3 + */ + ret_val = mbx->ops.read_posted(hw, msgbuf, + IXGBE_VF_PERMADDR_MSG_LEN, 0); + if (ret_val) + return ret_val; + + if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) && + msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK)) + return IXGBE_ERR_INVALID_MAC_ADDR; + + if (msgbuf[0] == (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK)) + memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS); + + hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD]; + + return ret_val; +} + +/** + * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw) +{ + u32 reg_val; + u16 i; + + /* + * Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + hw->adapter_stopped = true; + + /* Clear interrupt mask to stop from interrupts being generated */ + IXGBE_VFWRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK); + + /* Clear any pending interrupts, flush previous writes */ + IXGBE_VFREAD_REG(hw, IXGBE_VTEICR); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < hw->mac.max_tx_queues; i++) + IXGBE_VFWRITE_REG(hw, IXGBE_VFTXDCTL(i), IXGBE_TXDCTL_SWFLSH); + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < hw->mac.max_rx_queues; i++) { + reg_val = IXGBE_VFREAD_REG(hw, IXGBE_VFRXDCTL(i)); + reg_val &= ~IXGBE_RXDCTL_ENABLE; + IXGBE_VFWRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val); + } + /* Clear packet split and pool config */ + IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0); + + /* flush all queues disables */ + IXGBE_WRITE_FLUSH(hw); + msec_delay(2); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address + * + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initialization + * to mc_filter_type. + **/ +STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector = 0; + + switch (hw->mac.mc_filter_type) { + case 0: /* use bits [47:36] of the address */ + vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); + break; + case 1: /* use bits [46:35] of the address */ + vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); + break; + case 2: /* use bits [45:34] of the address */ + vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); + break; + case 3: /* use bits [43:32] of the address */ + vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); + break; + default: /* Invalid mc_filter_type */ + DEBUGOUT("MC filter type param set incorrectly\n"); + ASSERT(0); + break; + } + + /* vector can only be 12-bits or boundary will be exceeded */ + vector &= 0xFFF; + return vector; +} + +STATIC void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw, + u32 *msg, u16 size) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 retmsg[IXGBE_VFMAILBOX_SIZE]; + s32 retval = mbx->ops.write_posted(hw, msg, size, 0); + + if (!retval) + mbx->ops.read_posted(hw, retmsg, size, 0); +} + +/** + * ixgbe_set_rar_vf - set device MAC address + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active + **/ +s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + UNREFERENCED_3PARAMETER(vmdq, enable_addr, index); + + memset(msgbuf, 0, 12); + msgbuf[0] = IXGBE_VF_SET_MAC_ADDR; + memcpy(msg_addr, addr, 6); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); + + msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS; + + /* if nacked the address was rejected, use "perm_addr" */ + if (!ret_val && + (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK))) + ixgbe_get_mac_addr_vf(hw, hw->mac.addr); + + return ret_val; +} + +/** + * ixgbe_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @next: caller supplied function to return next address in list + * + * Updates the Multicast Table Array. + **/ +s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr next, + bool clear) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 msgbuf[IXGBE_VFMAILBOX_SIZE]; + u16 *vector_list = (u16 *)&msgbuf[1]; + u32 vector; + u32 cnt, i; + u32 vmdq; + + UNREFERENCED_1PARAMETER(clear); + + DEBUGFUNC("ixgbe_update_mc_addr_list_vf"); + + /* Each entry in the list uses 1 16 bit word. We have 30 + * 16 bit words available in our HW msg buffer (minus 1 for the + * msg type). That's 30 hash values if we pack 'em right. If + * there are more than 30 MC addresses to add then punt the + * extras for now and then add code to handle more than 30 later. + * It would be unusual for a server to request that many multi-cast + * addresses except for in large enterprise network environments. + */ + + DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count); + + cnt = (mc_addr_count > 30) ? 30 : mc_addr_count; + msgbuf[0] = IXGBE_VF_SET_MULTICAST; + msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT; + + for (i = 0; i < cnt; i++) { + vector = ixgbe_mta_vector(hw, next(hw, &mc_addr_list, &vmdq)); + DEBUGOUT1("Hash value = 0x%03X\n", vector); + vector_list[i] = (u16)vector; + } + + return mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE, 0); +} + +/** + * ixgbe_set_vfta_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vlan: 12 bit VLAN ID + * @vind: unused by VF drivers + * @vlan_on: if true then set bit, else clear bit + **/ +s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + s32 ret_val; + UNREFERENCED_1PARAMETER(vind); + + msgbuf[0] = IXGBE_VF_SET_VLAN; + msgbuf[1] = vlan; + /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */ + msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT; + + ret_val = mbx->ops.write_posted(hw, msgbuf, 2, 0); + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 1, 0); + + if (!ret_val && (msgbuf[0] & IXGBE_VT_MSGTYPE_ACK)) + return IXGBE_SUCCESS; + + return ret_val | (msgbuf[0] & IXGBE_VT_MSGTYPE_NACK); +} + +/** + * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues + * @hw: pointer to hardware structure + * + * Returns the number of transmit queues for the given adapter. + **/ +u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw) +{ + UNREFERENCED_1PARAMETER(hw); + return IXGBE_VF_MAX_TX_QUEUES; +} + +/** + * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues + * @hw: pointer to hardware structure + * + * Returns the number of receive queues for the given adapter. + **/ +u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw) +{ + UNREFERENCED_1PARAMETER(hw); + return IXGBE_VF_MAX_RX_QUEUES; +} + +/** + * ixgbe_get_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + **/ +s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr) +{ + int i; + + for (i = 0; i < IXGBE_ETH_LENGTH_OF_ADDRESS; i++) + mac_addr[i] = hw->mac.perm_addr[i]; + + return IXGBE_SUCCESS; +} + +s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, sizeof(msgbuf)); + /* + * If index is one then this is the start of a new list and needs + * indication to the PF so it can do it's own list management. + * If it is zero then that tells the PF to just clear all of + * this VF's macvlans and there is no new list. + */ + msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT; + msgbuf[0] |= IXGBE_VF_SET_MACVLAN; + if (addr) + memcpy(msg_addr, addr, 6); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); + + msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS; + + if (!ret_val) + if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK)) + ret_val = IXGBE_ERR_OUT_OF_MEM; + + return ret_val; +} + +/** + * ixgbe_setup_mac_link_vf - Setup MAC link settings + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + UNREFERENCED_3PARAMETER(hw, speed, autoneg_wait_to_complete); + return IXGBE_SUCCESS; +} + +/** + * ixgbe_check_mac_link_vf - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool autoneg_wait_to_complete) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + struct ixgbe_mac_info *mac = &hw->mac; + s32 ret_val = IXGBE_SUCCESS; + u32 links_reg; + u32 in_msg = 0; + UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); + + /* If we were hit with a reset drop the link */ + if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) + mac->get_link_status = true; + + if (!mac->get_link_status) + goto out; + + /* if link status is down no point in checking to see if pf is up */ + links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS); + if (!(links_reg & IXGBE_LINKS_UP)) + goto out; + + /* for SFP+ modules and DA cables on 82599 it can take up to 500usecs + * before the link status is correct + */ + if (mac->type == ixgbe_mac_82599_vf) { + int i; + + for (i = 0; i < 5; i++) { + usec_delay(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS); + + if (!(links_reg & IXGBE_LINKS_UP)) + goto out; + } + } + + switch (links_reg & IXGBE_LINKS_SPEED_82599) { + case IXGBE_LINKS_SPEED_10G_82599: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_LINKS_SPEED_1G_82599: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + case IXGBE_LINKS_SPEED_100_82599: + *speed = IXGBE_LINK_SPEED_100_FULL; + break; + } + + /* if the read failed it could just be a mailbox collision, best wait + * until we are called again and don't report an error + */ + if (mbx->ops.read(hw, &in_msg, 1, 0)) + goto out; + + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { + /* msg is not CTS and is NACK we must have lost CTS status */ + if (in_msg & IXGBE_VT_MSGTYPE_NACK) + ret_val = -1; + goto out; + } + + /* the pf is talking, if we timed out in the past we reinit */ + if (!mbx->timeout) { + ret_val = -1; + goto out; + } + + /* if we passed all the tests above then the link is up and we no + * longer need to check for link + */ + mac->get_link_status = false; + +out: + *link_up = !mac->get_link_status; + return ret_val; +} + +/** + * ixgbevf_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size + **/ +void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size) +{ + u32 msgbuf[2]; + + msgbuf[0] = IXGBE_VF_SET_LPE; + msgbuf[1] = max_size; + ixgbevf_write_msg_read_ack(hw, msgbuf, 2); +} + +/** + * ixgbevf_negotiate_api_version - Negotiate supported API version + * @hw: pointer to the HW structure + * @api: integer containing requested API version + **/ +int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api) +{ + int err; + u32 msg[3]; + + /* Negotiate the mailbox API version */ + msg[0] = IXGBE_VF_API_NEGOTIATE; + msg[1] = api; + msg[2] = 0; + err = hw->mbx.ops.write_posted(hw, msg, 3, 0); + + if (!err) + err = hw->mbx.ops.read_posted(hw, msg, 3, 0); + + if (!err) { + msg[0] &= ~IXGBE_VT_MSGTYPE_CTS; + + /* Store value and return 0 on success */ + if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) { + hw->api_version = api; + return 0; + } + + err = IXGBE_ERR_INVALID_ARGUMENT; + } + + return err; +} + +int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs, + unsigned int *default_tc) +{ + int err; + u32 msg[5]; + + /* do nothing if API doesn't support ixgbevf_get_queues */ + switch (hw->api_version) { + case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: + break; + default: + return 0; + } + + /* Fetch queue configuration from the PF */ + msg[0] = IXGBE_VF_GET_QUEUES; + msg[1] = msg[2] = msg[3] = msg[4] = 0; + err = hw->mbx.ops.write_posted(hw, msg, 5, 0); + + if (!err) + err = hw->mbx.ops.read_posted(hw, msg, 5, 0); + + if (!err) { + msg[0] &= ~IXGBE_VT_MSGTYPE_CTS; + + /* + * if we we didn't get an ACK there must have been + * some sort of mailbox error so we should treat it + * as such + */ + if (msg[0] != (IXGBE_VF_GET_QUEUES | IXGBE_VT_MSGTYPE_ACK)) + return IXGBE_ERR_MBX; + + /* record and validate values from message */ + hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES]; + if (hw->mac.max_tx_queues == 0 || + hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES) + hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES; + + hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES]; + if (hw->mac.max_rx_queues == 0 || + hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES) + hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES; + + *num_tcs = msg[IXGBE_VF_TRANS_VLAN]; + /* in case of unknown state assume we cannot tag frames */ + if (*num_tcs > hw->mac.max_rx_queues) + *num_tcs = 1; + + *default_tc = msg[IXGBE_VF_DEF_QUEUE]; + /* default to queue 0 on out-of-bounds queue number */ + if (*default_tc >= hw->mac.max_tx_queues) + *default_tc = 0; + } + + return err; +} -- cgit 1.2.3-korg