From 97f17497d162afdb82c8704bf097f0fee3724b2e Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:50:17 -0700 Subject: Imported Upstream version 16.04 Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier --- examples/multi_process/symmetric_mp/Makefile | 50 +++ examples/multi_process/symmetric_mp/main.c | 472 +++++++++++++++++++++++++++ 2 files changed, 522 insertions(+) create mode 100644 examples/multi_process/symmetric_mp/Makefile create mode 100644 examples/multi_process/symmetric_mp/main.c (limited to 'examples/multi_process/symmetric_mp') diff --git a/examples/multi_process/symmetric_mp/Makefile b/examples/multi_process/symmetric_mp/Makefile new file mode 100644 index 00000000..c789f3c9 --- /dev/null +++ b/examples/multi_process/symmetric_mp/Makefile @@ -0,0 +1,50 @@ +# BSD LICENSE +# +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +ifeq ($(RTE_SDK),) +$(error "Please define RTE_SDK environment variable") +endif + +# Default target, can be overriden by command line or environment +RTE_TARGET ?= x86_64-native-linuxapp-gcc + +include $(RTE_SDK)/mk/rte.vars.mk + +# binary name +APP = symmetric_mp + +# all source are stored in SRCS-y +SRCS-y := main.c + +CFLAGS += -O3 +CFLAGS += $(WERROR_FLAGS) + +include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/examples/multi_process/symmetric_mp/main.c b/examples/multi_process/symmetric_mp/main.c new file mode 100644 index 00000000..6bbff076 --- /dev/null +++ b/examples/multi_process/symmetric_mp/main.c @@ -0,0 +1,472 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Sample application demostrating how to do packet I/O in a multi-process + * environment. The same code can be run as a primary process and as a + * secondary process, just with a different proc-id parameter in each case + * (apart from the EAL flag to indicate a secondary process). + * + * Each process will read from the same ports, given by the port-mask + * parameter, which should be the same in each case, just using a different + * queue per port as determined by the proc-id parameter. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1 + +#define NB_MBUFS 64*1024 /* use 64k mbufs */ +#define MBUF_CACHE_SIZE 256 +#define PKT_BURST 32 +#define RX_RING_SIZE 128 +#define TX_RING_SIZE 512 + +#define PARAM_PROC_ID "proc-id" +#define PARAM_NUM_PROCS "num-procs" + +/* for each lcore, record the elements of the ports array to use */ +struct lcore_ports{ + unsigned start_port; + unsigned num_ports; +}; + +/* structure to record the rx and tx packets. Put two per cache line as ports + * used in pairs */ +struct port_stats{ + unsigned rx; + unsigned tx; + unsigned drop; +} __attribute__((aligned(RTE_CACHE_LINE_SIZE / 2))); + +static int proc_id = -1; +static unsigned num_procs = 0; + +static uint8_t ports[RTE_MAX_ETHPORTS]; +static unsigned num_ports = 0; + +static struct lcore_ports lcore_ports[RTE_MAX_LCORE]; +static struct port_stats pstats[RTE_MAX_ETHPORTS]; + +/* prints the usage statement and quits with an error message */ +static void +smp_usage(const char *prgname, const char *errmsg) +{ + printf("\nError: %s\n",errmsg); + printf("\n%s [EAL options] -- -p " + "--"PARAM_NUM_PROCS" " + " --"PARAM_PROC_ID" \n" + "-p : a hex bitmask indicating what ports are to be used\n" + "--num-procs: the number of processes which will be used\n" + "--proc-id : the id of the current process (id < num-procs)\n" + "\n", + prgname); + exit(1); +} + + +/* signal handler configured for SIGTERM and SIGINT to print stats on exit */ +static void +print_stats(int signum) +{ + unsigned i; + printf("\nExiting on signal %d\n\n", signum); + for (i = 0; i < num_ports; i++){ + const uint8_t p_num = ports[i]; + printf("Port %u: RX - %u, TX - %u, Drop - %u\n", (unsigned)p_num, + pstats[p_num].rx, pstats[p_num].tx, pstats[p_num].drop); + } + exit(0); +} + +/* Parse the argument given in the command line of the application */ +static int +smp_parse_args(int argc, char **argv) +{ + int opt, ret; + char **argvopt; + int option_index; + unsigned i, port_mask = 0; + char *prgname = argv[0]; + static struct option lgopts[] = { + {PARAM_NUM_PROCS, 1, 0, 0}, + {PARAM_PROC_ID, 1, 0, 0}, + {NULL, 0, 0, 0} + }; + + argvopt = argv; + + while ((opt = getopt_long(argc, argvopt, "p:", \ + lgopts, &option_index)) != EOF) { + + switch (opt) { + case 'p': + port_mask = strtoull(optarg, NULL, 16); + break; + /* long options */ + case 0: + if (strncmp(lgopts[option_index].name, PARAM_NUM_PROCS, 8) == 0) + num_procs = atoi(optarg); + else if (strncmp(lgopts[option_index].name, PARAM_PROC_ID, 7) == 0) + proc_id = atoi(optarg); + break; + + default: + smp_usage(prgname, "Cannot parse all command-line arguments\n"); + } + } + + if (optind >= 0) + argv[optind-1] = prgname; + + if (proc_id < 0) + smp_usage(prgname, "Invalid or missing proc-id parameter\n"); + if (rte_eal_process_type() == RTE_PROC_PRIMARY && num_procs == 0) + smp_usage(prgname, "Invalid or missing num-procs parameter\n"); + if (port_mask == 0) + smp_usage(prgname, "Invalid or missing port mask\n"); + + /* get the port numbers from the port mask */ + for(i = 0; i < rte_eth_dev_count(); i++) + if(port_mask & (1 << i)) + ports[num_ports++] = (uint8_t)i; + + ret = optind-1; + optind = 0; /* reset getopt lib */ + + return ret; +} + +/* + * Initialises a given port using global settings and with the rx buffers + * coming from the mbuf_pool passed as parameter + */ +static inline int +smp_port_init(uint8_t port, struct rte_mempool *mbuf_pool, uint16_t num_queues) +{ + struct rte_eth_conf port_conf = { + .rxmode = { + .mq_mode = ETH_MQ_RX_RSS, + .split_hdr_size = 0, + .header_split = 0, /**< Header Split disabled */ + .hw_ip_checksum = 1, /**< IP checksum offload enabled */ + .hw_vlan_filter = 0, /**< VLAN filtering disabled */ + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ + .hw_strip_crc = 0, /**< CRC stripped by hardware */ + }, + .rx_adv_conf = { + .rss_conf = { + .rss_key = NULL, + .rss_hf = ETH_RSS_IP, + }, + }, + .txmode = { + .mq_mode = ETH_MQ_TX_NONE, + } + }; + const uint16_t rx_rings = num_queues, tx_rings = num_queues; + struct rte_eth_dev_info info; + int retval; + uint16_t q; + + if (rte_eal_process_type() == RTE_PROC_SECONDARY) + return 0; + + if (port >= rte_eth_dev_count()) + return -1; + + printf("# Initialising port %u... ", (unsigned)port); + fflush(stdout); + + rte_eth_dev_info_get(port, &info); + info.default_rxconf.rx_drop_en = 1; + + retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf); + if (retval < 0) + return retval; + + for (q = 0; q < rx_rings; q ++) { + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE, + rte_eth_dev_socket_id(port), + &info.default_rxconf, + mbuf_pool); + if (retval < 0) + return retval; + } + + for (q = 0; q < tx_rings; q ++) { + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE, + rte_eth_dev_socket_id(port), + NULL); + if (retval < 0) + return retval; + } + + rte_eth_promiscuous_enable(port); + + retval = rte_eth_dev_start(port); + if (retval < 0) + return retval; + + return 0; +} + +/* Goes through each of the lcores and calculates what ports should + * be used by that core. Fills in the global lcore_ports[] array. + */ +static void +assign_ports_to_cores(void) +{ + + const unsigned lcores = rte_eal_get_configuration()->lcore_count; + const unsigned port_pairs = num_ports / 2; + const unsigned pairs_per_lcore = port_pairs / lcores; + unsigned extra_pairs = port_pairs % lcores; + unsigned ports_assigned = 0; + unsigned i; + + RTE_LCORE_FOREACH(i) { + lcore_ports[i].start_port = ports_assigned; + lcore_ports[i].num_ports = pairs_per_lcore * 2; + if (extra_pairs > 0) { + lcore_ports[i].num_ports += 2; + extra_pairs--; + } + ports_assigned += lcore_ports[i].num_ports; + } +} + +/* Main function used by the processing threads. + * Prints out some configuration details for the thread and then begins + * performing packet RX and TX. + */ +static int +lcore_main(void *arg __rte_unused) +{ + const unsigned id = rte_lcore_id(); + const unsigned start_port = lcore_ports[id].start_port; + const unsigned end_port = start_port + lcore_ports[id].num_ports; + const uint16_t q_id = (uint16_t)proc_id; + unsigned p, i; + char msgbuf[256]; + int msgbufpos = 0; + + if (start_port == end_port){ + printf("Lcore %u has nothing to do\n", id); + return 0; + } + + /* build up message in msgbuf before printing to decrease likelihood + * of multi-core message interleaving. + */ + msgbufpos += snprintf(msgbuf, sizeof(msgbuf) - msgbufpos, + "Lcore %u using ports ", id); + for (p = start_port; p < end_port; p++){ + msgbufpos += snprintf(msgbuf + msgbufpos, sizeof(msgbuf) - msgbufpos, + "%u ", (unsigned)ports[p]); + } + printf("%s\n", msgbuf); + printf("lcore %u using queue %u of each port\n", id, (unsigned)q_id); + + /* handle packet I/O from the ports, reading and writing to the + * queue number corresponding to our process number (not lcore id) + */ + + for (;;) { + struct rte_mbuf *buf[PKT_BURST]; + + for (p = start_port; p < end_port; p++) { + const uint8_t src = ports[p]; + const uint8_t dst = ports[p ^ 1]; /* 0 <-> 1, 2 <-> 3 etc */ + const uint16_t rx_c = rte_eth_rx_burst(src, q_id, buf, PKT_BURST); + if (rx_c == 0) + continue; + pstats[src].rx += rx_c; + + const uint16_t tx_c = rte_eth_tx_burst(dst, q_id, buf, rx_c); + pstats[dst].tx += tx_c; + if (tx_c != rx_c) { + pstats[dst].drop += (rx_c - tx_c); + for (i = tx_c; i < rx_c; i++) + rte_pktmbuf_free(buf[i]); + } + } + } +} + +/* Check the link status of all ports in up to 9s, and print them finally */ +static void +check_all_ports_link_status(uint8_t port_num, uint32_t port_mask) +{ +#define CHECK_INTERVAL 100 /* 100ms */ +#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */ + uint8_t portid, count, all_ports_up, print_flag = 0; + struct rte_eth_link link; + + printf("\nChecking link status"); + fflush(stdout); + for (count = 0; count <= MAX_CHECK_TIME; count++) { + all_ports_up = 1; + for (portid = 0; portid < port_num; portid++) { + if ((port_mask & (1 << portid)) == 0) + continue; + memset(&link, 0, sizeof(link)); + rte_eth_link_get_nowait(portid, &link); + /* print link status if flag set */ + if (print_flag == 1) { + if (link.link_status) + printf("Port %d Link Up - speed %u " + "Mbps - %s\n", (uint8_t)portid, + (unsigned)link.link_speed, + (link.link_duplex == ETH_LINK_FULL_DUPLEX) ? + ("full-duplex") : ("half-duplex\n")); + else + printf("Port %d Link Down\n", + (uint8_t)portid); + continue; + } + /* clear all_ports_up flag if any link down */ + if (link.link_status == ETH_LINK_DOWN) { + all_ports_up = 0; + break; + } + } + /* after finally printing all link status, get out */ + if (print_flag == 1) + break; + + if (all_ports_up == 0) { + printf("."); + fflush(stdout); + rte_delay_ms(CHECK_INTERVAL); + } + + /* set the print_flag if all ports up or timeout */ + if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) { + print_flag = 1; + printf("done\n"); + } + } +} + +/* Main function. + * Performs initialisation and then calls the lcore_main on each core + * to do the packet-processing work. + */ +int +main(int argc, char **argv) +{ + static const char *_SMP_MBUF_POOL = "SMP_MBUF_POOL"; + int ret; + unsigned i; + enum rte_proc_type_t proc_type; + struct rte_mempool *mp; + + /* set up signal handlers to print stats on exit */ + signal(SIGINT, print_stats); + signal(SIGTERM, print_stats); + + /* initialise the EAL for all */ + ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Cannot init EAL\n"); + argc -= ret; + argv += ret; + + /* determine the NIC devices available */ + if (rte_eth_dev_count() == 0) + rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n"); + + /* parse application arguments (those after the EAL ones) */ + smp_parse_args(argc, argv); + + proc_type = rte_eal_process_type(); + mp = (proc_type == RTE_PROC_SECONDARY) ? + rte_mempool_lookup(_SMP_MBUF_POOL) : + rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS, + MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, + rte_socket_id()); + if (mp == NULL) + rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n"); + + if (num_ports & 1) + rte_exit(EXIT_FAILURE, "Application must use an even number of ports\n"); + for(i = 0; i < num_ports; i++){ + if(proc_type == RTE_PROC_PRIMARY) + if (smp_port_init(ports[i], mp, (uint16_t)num_procs) < 0) + rte_exit(EXIT_FAILURE, "Error initialising ports\n"); + } + + if (proc_type == RTE_PROC_PRIMARY) + check_all_ports_link_status((uint8_t)num_ports, (~0x0)); + + assign_ports_to_cores(); + + RTE_LOG(INFO, APP, "Finished Process Init.\n"); + + rte_eal_mp_remote_launch(lcore_main, NULL, CALL_MASTER); + + return 0; +} -- cgit 1.2.3-korg