From 97f17497d162afdb82c8704bf097f0fee3724b2e Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:50:17 -0700 Subject: Imported Upstream version 16.04 Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757 Signed-off-by: C.J. Collier --- lib/librte_eal/linuxapp/eal/eal.c | 936 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 936 insertions(+) create mode 100644 lib/librte_eal/linuxapp/eal/eal.c (limited to 'lib/librte_eal/linuxapp/eal/eal.c') diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c new file mode 100644 index 00000000..8aafd519 --- /dev/null +++ b/lib/librte_eal/linuxapp/eal/eal.c @@ -0,0 +1,936 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. + * Copyright(c) 2012-2014 6WIND S.A. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(RTE_ARCH_X86) +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "eal_private.h" +#include "eal_thread.h" +#include "eal_internal_cfg.h" +#include "eal_filesystem.h" +#include "eal_hugepages.h" +#include "eal_options.h" + +#define MEMSIZE_IF_NO_HUGE_PAGE (64ULL * 1024ULL * 1024ULL) + +#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10) + +/* Allow the application to print its usage message too if set */ +static rte_usage_hook_t rte_application_usage_hook = NULL; + +/* early configuration structure, when memory config is not mmapped */ +static struct rte_mem_config early_mem_config; + +/* define fd variable here, because file needs to be kept open for the + * duration of the program, as we hold a write lock on it in the primary proc */ +static int mem_cfg_fd = -1; + +static struct flock wr_lock = { + .l_type = F_WRLCK, + .l_whence = SEEK_SET, + .l_start = offsetof(struct rte_mem_config, memseg), + .l_len = sizeof(early_mem_config.memseg), +}; + +/* Address of global and public configuration */ +static struct rte_config rte_config = { + .mem_config = &early_mem_config, +}; + +/* internal configuration (per-core) */ +struct lcore_config lcore_config[RTE_MAX_LCORE]; + +/* internal configuration */ +struct internal_config internal_config; + +/* used by rte_rdtsc() */ +int rte_cycles_vmware_tsc_map; + +/* Return a pointer to the configuration structure */ +struct rte_config * +rte_eal_get_configuration(void) +{ + return &rte_config; +} + +/* parse a sysfs (or other) file containing one integer value */ +int +eal_parse_sysfs_value(const char *filename, unsigned long *val) +{ + FILE *f; + char buf[BUFSIZ]; + char *end = NULL; + + if ((f = fopen(filename, "r")) == NULL) { + RTE_LOG(ERR, EAL, "%s(): cannot open sysfs value %s\n", + __func__, filename); + return -1; + } + + if (fgets(buf, sizeof(buf), f) == NULL) { + RTE_LOG(ERR, EAL, "%s(): cannot read sysfs value %s\n", + __func__, filename); + fclose(f); + return -1; + } + *val = strtoul(buf, &end, 0); + if ((buf[0] == '\0') || (end == NULL) || (*end != '\n')) { + RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs value %s\n", + __func__, filename); + fclose(f); + return -1; + } + fclose(f); + return 0; +} + + +/* create memory configuration in shared/mmap memory. Take out + * a write lock on the memsegs, so we can auto-detect primary/secondary. + * This means we never close the file while running (auto-close on exit). + * We also don't lock the whole file, so that in future we can use read-locks + * on other parts, e.g. memzones, to detect if there are running secondary + * processes. */ +static void +rte_eal_config_create(void) +{ + void *rte_mem_cfg_addr; + int retval; + + const char *pathname = eal_runtime_config_path(); + + if (internal_config.no_shconf) + return; + + /* map the config before hugepage address so that we don't waste a page */ + if (internal_config.base_virtaddr != 0) + rte_mem_cfg_addr = (void *) + RTE_ALIGN_FLOOR(internal_config.base_virtaddr - + sizeof(struct rte_mem_config), sysconf(_SC_PAGE_SIZE)); + else + rte_mem_cfg_addr = NULL; + + if (mem_cfg_fd < 0){ + mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0660); + if (mem_cfg_fd < 0) + rte_panic("Cannot open '%s' for rte_mem_config\n", pathname); + } + + retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config)); + if (retval < 0){ + close(mem_cfg_fd); + rte_panic("Cannot resize '%s' for rte_mem_config\n", pathname); + } + + retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock); + if (retval < 0){ + close(mem_cfg_fd); + rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is another primary " + "process running?\n", pathname); + } + + rte_mem_cfg_addr = mmap(rte_mem_cfg_addr, sizeof(*rte_config.mem_config), + PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0); + + if (rte_mem_cfg_addr == MAP_FAILED){ + rte_panic("Cannot mmap memory for rte_config\n"); + } + memcpy(rte_mem_cfg_addr, &early_mem_config, sizeof(early_mem_config)); + rte_config.mem_config = (struct rte_mem_config *) rte_mem_cfg_addr; + + /* store address of the config in the config itself so that secondary + * processes could later map the config into this exact location */ + rte_config.mem_config->mem_cfg_addr = (uintptr_t) rte_mem_cfg_addr; + +} + +/* attach to an existing shared memory config */ +static void +rte_eal_config_attach(void) +{ + struct rte_mem_config *mem_config; + + const char *pathname = eal_runtime_config_path(); + + if (internal_config.no_shconf) + return; + + if (mem_cfg_fd < 0){ + mem_cfg_fd = open(pathname, O_RDWR); + if (mem_cfg_fd < 0) + rte_panic("Cannot open '%s' for rte_mem_config\n", pathname); + } + + /* map it as read-only first */ + mem_config = (struct rte_mem_config *) mmap(NULL, sizeof(*mem_config), + PROT_READ, MAP_SHARED, mem_cfg_fd, 0); + if (mem_config == MAP_FAILED) + rte_panic("Cannot mmap memory for rte_config\n"); + + rte_config.mem_config = mem_config; +} + +/* reattach the shared config at exact memory location primary process has it */ +static void +rte_eal_config_reattach(void) +{ + struct rte_mem_config *mem_config; + void *rte_mem_cfg_addr; + + if (internal_config.no_shconf) + return; + + /* save the address primary process has mapped shared config to */ + rte_mem_cfg_addr = (void *) (uintptr_t) rte_config.mem_config->mem_cfg_addr; + + /* unmap original config */ + munmap(rte_config.mem_config, sizeof(struct rte_mem_config)); + + /* remap the config at proper address */ + mem_config = (struct rte_mem_config *) mmap(rte_mem_cfg_addr, + sizeof(*mem_config), PROT_READ | PROT_WRITE, MAP_SHARED, + mem_cfg_fd, 0); + close(mem_cfg_fd); + if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr) + rte_panic("Cannot mmap memory for rte_config\n"); + + rte_config.mem_config = mem_config; +} + +/* Detect if we are a primary or a secondary process */ +enum rte_proc_type_t +eal_proc_type_detect(void) +{ + enum rte_proc_type_t ptype = RTE_PROC_PRIMARY; + const char *pathname = eal_runtime_config_path(); + + /* if we can open the file but not get a write-lock we are a secondary + * process. NOTE: if we get a file handle back, we keep that open + * and don't close it to prevent a race condition between multiple opens */ + if (((mem_cfg_fd = open(pathname, O_RDWR)) >= 0) && + (fcntl(mem_cfg_fd, F_SETLK, &wr_lock) < 0)) + ptype = RTE_PROC_SECONDARY; + + RTE_LOG(INFO, EAL, "Auto-detected process type: %s\n", + ptype == RTE_PROC_PRIMARY ? "PRIMARY" : "SECONDARY"); + + return ptype; +} + +/* Sets up rte_config structure with the pointer to shared memory config.*/ +static void +rte_config_init(void) +{ + rte_config.process_type = internal_config.process_type; + + switch (rte_config.process_type){ + case RTE_PROC_PRIMARY: + rte_eal_config_create(); + break; + case RTE_PROC_SECONDARY: + rte_eal_config_attach(); + rte_eal_mcfg_wait_complete(rte_config.mem_config); + rte_eal_config_reattach(); + break; + case RTE_PROC_AUTO: + case RTE_PROC_INVALID: + rte_panic("Invalid process type\n"); + } +} + +/* Unlocks hugepage directories that were locked by eal_hugepage_info_init */ +static void +eal_hugedirs_unlock(void) +{ + int i; + + for (i = 0; i < MAX_HUGEPAGE_SIZES; i++) + { + /* skip uninitialized */ + if (internal_config.hugepage_info[i].lock_descriptor < 0) + continue; + /* unlock hugepage file */ + flock(internal_config.hugepage_info[i].lock_descriptor, LOCK_UN); + close(internal_config.hugepage_info[i].lock_descriptor); + /* reset the field */ + internal_config.hugepage_info[i].lock_descriptor = -1; + } +} + +/* display usage */ +static void +eal_usage(const char *prgname) +{ + printf("\nUsage: %s ", prgname); + eal_common_usage(); + printf("EAL Linux options:\n" + " --"OPT_SOCKET_MEM" Memory to allocate on sockets (comma separated values)\n" + " --"OPT_HUGE_DIR" Directory where hugetlbfs is mounted\n" + " --"OPT_FILE_PREFIX" Prefix for hugepage filenames\n" + " --"OPT_BASE_VIRTADDR" Base virtual address\n" + " --"OPT_CREATE_UIO_DEV" Create /dev/uioX (usually done by hotplug)\n" + " --"OPT_VFIO_INTR" Interrupt mode for VFIO (legacy|msi|msix)\n" + " --"OPT_XEN_DOM0" Support running on Xen dom0 without hugetlbfs\n" + "\n"); + /* Allow the application to print its usage message too if hook is set */ + if ( rte_application_usage_hook ) { + printf("===== Application Usage =====\n\n"); + rte_application_usage_hook(prgname); + } +} + +/* Set a per-application usage message */ +rte_usage_hook_t +rte_set_application_usage_hook( rte_usage_hook_t usage_func ) +{ + rte_usage_hook_t old_func; + + /* Will be NULL on the first call to denote the last usage routine. */ + old_func = rte_application_usage_hook; + rte_application_usage_hook = usage_func; + + return old_func; +} + +static int +eal_parse_socket_mem(char *socket_mem) +{ + char * arg[RTE_MAX_NUMA_NODES]; + char *end; + int arg_num, i, len; + uint64_t total_mem = 0; + + len = strnlen(socket_mem, SOCKET_MEM_STRLEN); + if (len == SOCKET_MEM_STRLEN) { + RTE_LOG(ERR, EAL, "--socket-mem is too long\n"); + return -1; + } + + /* all other error cases will be caught later */ + if (!isdigit(socket_mem[len-1])) + return -1; + + /* split the optarg into separate socket values */ + arg_num = rte_strsplit(socket_mem, len, + arg, RTE_MAX_NUMA_NODES, ','); + + /* if split failed, or 0 arguments */ + if (arg_num <= 0) + return -1; + + internal_config.force_sockets = 1; + + /* parse each defined socket option */ + errno = 0; + for (i = 0; i < arg_num; i++) { + end = NULL; + internal_config.socket_mem[i] = strtoull(arg[i], &end, 10); + + /* check for invalid input */ + if ((errno != 0) || + (arg[i][0] == '\0') || (end == NULL) || (*end != '\0')) + return -1; + internal_config.socket_mem[i] *= 1024ULL; + internal_config.socket_mem[i] *= 1024ULL; + total_mem += internal_config.socket_mem[i]; + } + + /* check if we have a positive amount of total memory */ + if (total_mem == 0) + return -1; + + return 0; +} + +static int +eal_parse_base_virtaddr(const char *arg) +{ + char *end; + uint64_t addr; + + errno = 0; + addr = strtoull(arg, &end, 16); + + /* check for errors */ + if ((errno != 0) || (arg[0] == '\0') || end == NULL || (*end != '\0')) + return -1; + + /* make sure we don't exceed 32-bit boundary on 32-bit target */ +#ifndef RTE_ARCH_64 + if (addr >= UINTPTR_MAX) + return -1; +#endif + + /* align the addr on 16M boundary, 16MB is the minimum huge page + * size on IBM Power architecture. If the addr is aligned to 16MB, + * it can align to 2MB for x86. So this alignment can also be used + * on x86 */ + internal_config.base_virtaddr = + RTE_PTR_ALIGN_CEIL((uintptr_t)addr, (size_t)RTE_PGSIZE_16M); + + return 0; +} + +static int +eal_parse_vfio_intr(const char *mode) +{ + unsigned i; + static struct { + const char *name; + enum rte_intr_mode value; + } map[] = { + { "legacy", RTE_INTR_MODE_LEGACY }, + { "msi", RTE_INTR_MODE_MSI }, + { "msix", RTE_INTR_MODE_MSIX }, + }; + + for (i = 0; i < RTE_DIM(map); i++) { + if (!strcmp(mode, map[i].name)) { + internal_config.vfio_intr_mode = map[i].value; + return 0; + } + } + return -1; +} + +static inline size_t +eal_get_hugepage_mem_size(void) +{ + uint64_t size = 0; + unsigned i, j; + + for (i = 0; i < internal_config.num_hugepage_sizes; i++) { + struct hugepage_info *hpi = &internal_config.hugepage_info[i]; + if (hpi->hugedir != NULL) { + for (j = 0; j < RTE_MAX_NUMA_NODES; j++) { + size += hpi->hugepage_sz * hpi->num_pages[j]; + } + } + } + + return (size < SIZE_MAX) ? (size_t)(size) : SIZE_MAX; +} + +/* Parse the arguments for --log-level only */ +static void +eal_log_level_parse(int argc, char **argv) +{ + int opt; + char **argvopt; + int option_index; + const int old_optind = optind; + const int old_optopt = optopt; + char * const old_optarg = optarg; + + argvopt = argv; + optind = 1; + + eal_reset_internal_config(&internal_config); + + while ((opt = getopt_long(argc, argvopt, eal_short_options, + eal_long_options, &option_index)) != EOF) { + + int ret; + + /* getopt is not happy, stop right now */ + if (opt == '?') + break; + + ret = (opt == OPT_LOG_LEVEL_NUM) ? + eal_parse_common_option(opt, optarg, &internal_config) : 0; + + /* common parser is not happy */ + if (ret < 0) + break; + } + + /* restore getopt lib */ + optind = old_optind; + optopt = old_optopt; + optarg = old_optarg; +} + +/* Parse the argument given in the command line of the application */ +static int +eal_parse_args(int argc, char **argv) +{ + int opt, ret; + char **argvopt; + int option_index; + char *prgname = argv[0]; + const int old_optind = optind; + const int old_optopt = optopt; + char * const old_optarg = optarg; + + argvopt = argv; + optind = 1; + + while ((opt = getopt_long(argc, argvopt, eal_short_options, + eal_long_options, &option_index)) != EOF) { + + /* getopt is not happy, stop right now */ + if (opt == '?') { + eal_usage(prgname); + ret = -1; + goto out; + } + + ret = eal_parse_common_option(opt, optarg, &internal_config); + /* common parser is not happy */ + if (ret < 0) { + eal_usage(prgname); + ret = -1; + goto out; + } + /* common parser handled this option */ + if (ret == 0) + continue; + + switch (opt) { + case 'h': + eal_usage(prgname); + exit(EXIT_SUCCESS); + + /* long options */ + case OPT_XEN_DOM0_NUM: +#ifdef RTE_LIBRTE_XEN_DOM0 + internal_config.xen_dom0_support = 1; +#else + RTE_LOG(ERR, EAL, "Can't support DPDK app " + "running on Dom0, please configure" + " RTE_LIBRTE_XEN_DOM0=y\n"); + ret = -1; + goto out; +#endif + break; + + case OPT_HUGE_DIR_NUM: + internal_config.hugepage_dir = optarg; + break; + + case OPT_FILE_PREFIX_NUM: + internal_config.hugefile_prefix = optarg; + break; + + case OPT_SOCKET_MEM_NUM: + if (eal_parse_socket_mem(optarg) < 0) { + RTE_LOG(ERR, EAL, "invalid parameters for --" + OPT_SOCKET_MEM "\n"); + eal_usage(prgname); + ret = -1; + goto out; + } + break; + + case OPT_BASE_VIRTADDR_NUM: + if (eal_parse_base_virtaddr(optarg) < 0) { + RTE_LOG(ERR, EAL, "invalid parameter for --" + OPT_BASE_VIRTADDR "\n"); + eal_usage(prgname); + ret = -1; + goto out; + } + break; + + case OPT_VFIO_INTR_NUM: + if (eal_parse_vfio_intr(optarg) < 0) { + RTE_LOG(ERR, EAL, "invalid parameters for --" + OPT_VFIO_INTR "\n"); + eal_usage(prgname); + ret = -1; + goto out; + } + break; + + case OPT_CREATE_UIO_DEV_NUM: + internal_config.create_uio_dev = 1; + break; + + default: + if (opt < OPT_LONG_MIN_NUM && isprint(opt)) { + RTE_LOG(ERR, EAL, "Option %c is not supported " + "on Linux\n", opt); + } else if (opt >= OPT_LONG_MIN_NUM && + opt < OPT_LONG_MAX_NUM) { + RTE_LOG(ERR, EAL, "Option %s is not supported " + "on Linux\n", + eal_long_options[option_index].name); + } else { + RTE_LOG(ERR, EAL, "Option %d is not supported " + "on Linux\n", opt); + } + eal_usage(prgname); + ret = -1; + goto out; + } + } + + if (eal_adjust_config(&internal_config) != 0) { + ret = -1; + goto out; + } + + /* sanity checks */ + if (eal_check_common_options(&internal_config) != 0) { + eal_usage(prgname); + ret = -1; + goto out; + } + + /* --xen-dom0 doesn't make sense with --socket-mem */ + if (internal_config.xen_dom0_support && internal_config.force_sockets == 1) { + RTE_LOG(ERR, EAL, "Options --"OPT_SOCKET_MEM" cannot be specified " + "together with --"OPT_XEN_DOM0"\n"); + eal_usage(prgname); + ret = -1; + goto out; + } + + if (optind >= 0) + argv[optind-1] = prgname; + ret = optind-1; + +out: + /* restore getopt lib */ + optind = old_optind; + optopt = old_optopt; + optarg = old_optarg; + + return ret; +} + +static void +eal_check_mem_on_local_socket(void) +{ + const struct rte_memseg *ms; + int i, socket_id; + + socket_id = rte_lcore_to_socket_id(rte_config.master_lcore); + + ms = rte_eal_get_physmem_layout(); + + for (i = 0; i < RTE_MAX_MEMSEG; i++) + if (ms[i].socket_id == socket_id && + ms[i].len > 0) + return; + + RTE_LOG(WARNING, EAL, "WARNING: Master core has no " + "memory on local socket!\n"); +} + +static int +sync_func(__attribute__((unused)) void *arg) +{ + return 0; +} + +inline static void +rte_eal_mcfg_complete(void) +{ + /* ALL shared mem_config related INIT DONE */ + if (rte_config.process_type == RTE_PROC_PRIMARY) + rte_config.mem_config->magic = RTE_MAGIC; +} + +/* + * Request iopl privilege for all RPL, returns 0 on success + * iopl() call is mostly for the i386 architecture. For other architectures, + * return -1 to indicate IO privilege can't be changed in this way. + */ +int +rte_eal_iopl_init(void) +{ +#if defined(RTE_ARCH_X86) + if (iopl(3) != 0) + return -1; + return 0; +#elif defined(RTE_ARCH_ARM) || defined(RTE_ARCH_ARM64) + return 0; /* iopl syscall not supported for ARM/ARM64 */ +#else + return -1; +#endif +} + +/* Launch threads, called at application init(). */ +int +rte_eal_init(int argc, char **argv) +{ + int i, fctret, ret; + pthread_t thread_id; + static rte_atomic32_t run_once = RTE_ATOMIC32_INIT(0); + const char *logid; + char cpuset[RTE_CPU_AFFINITY_STR_LEN]; + char thread_name[RTE_MAX_THREAD_NAME_LEN]; + + if (!rte_atomic32_test_and_set(&run_once)) + return -1; + + logid = strrchr(argv[0], '/'); + logid = strdup(logid ? logid + 1: argv[0]); + + thread_id = pthread_self(); + + if (rte_eal_log_early_init() < 0) + rte_panic("Cannot init early logs\n"); + + eal_log_level_parse(argc, argv); + + /* set log level as early as possible */ + rte_set_log_level(internal_config.log_level); + + if (rte_eal_cpu_init() < 0) + rte_panic("Cannot detect lcores\n"); + + fctret = eal_parse_args(argc, argv); + if (fctret < 0) + exit(1); + + if (internal_config.no_hugetlbfs == 0 && + internal_config.process_type != RTE_PROC_SECONDARY && + internal_config.xen_dom0_support == 0 && + eal_hugepage_info_init() < 0) + rte_panic("Cannot get hugepage information\n"); + + if (internal_config.memory == 0 && internal_config.force_sockets == 0) { + if (internal_config.no_hugetlbfs) + internal_config.memory = MEMSIZE_IF_NO_HUGE_PAGE; + else + internal_config.memory = eal_get_hugepage_mem_size(); + } + + if (internal_config.vmware_tsc_map == 1) { +#ifdef RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT + rte_cycles_vmware_tsc_map = 1; + RTE_LOG (DEBUG, EAL, "Using VMWARE TSC MAP, " + "you must have monitor_control.pseudo_perfctr = TRUE\n"); +#else + RTE_LOG (WARNING, EAL, "Ignoring --vmware-tsc-map because " + "RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is not set\n"); +#endif + } + + rte_srand(rte_rdtsc()); + + rte_config_init(); + + if (rte_eal_pci_init() < 0) + rte_panic("Cannot init PCI\n"); + +#ifdef RTE_LIBRTE_IVSHMEM + if (rte_eal_ivshmem_init() < 0) + rte_panic("Cannot init IVSHMEM\n"); +#endif + + if (rte_eal_memory_init() < 0) + rte_panic("Cannot init memory\n"); + + /* the directories are locked during eal_hugepage_info_init */ + eal_hugedirs_unlock(); + + if (rte_eal_memzone_init() < 0) + rte_panic("Cannot init memzone\n"); + + if (rte_eal_tailqs_init() < 0) + rte_panic("Cannot init tail queues for objects\n"); + +#ifdef RTE_LIBRTE_IVSHMEM + if (rte_eal_ivshmem_obj_init() < 0) + rte_panic("Cannot init IVSHMEM objects\n"); +#endif + + if (rte_eal_log_init(logid, internal_config.syslog_facility) < 0) + rte_panic("Cannot init logs\n"); + + if (rte_eal_alarm_init() < 0) + rte_panic("Cannot init interrupt-handling thread\n"); + + if (rte_eal_timer_init() < 0) + rte_panic("Cannot init HPET or TSC timers\n"); + + eal_check_mem_on_local_socket(); + + if (eal_plugins_init() < 0) + rte_panic("Cannot init plugins\n"); + + eal_thread_init_master(rte_config.master_lcore); + + ret = eal_thread_dump_affinity(cpuset, RTE_CPU_AFFINITY_STR_LEN); + + RTE_LOG(DEBUG, EAL, "Master lcore %u is ready (tid=%x;cpuset=[%s%s])\n", + rte_config.master_lcore, (int)thread_id, cpuset, + ret == 0 ? "" : "..."); + + if (rte_eal_dev_init() < 0) + rte_panic("Cannot init pmd devices\n"); + + if (rte_eal_intr_init() < 0) + rte_panic("Cannot init interrupt-handling thread\n"); + + RTE_LCORE_FOREACH_SLAVE(i) { + + /* + * create communication pipes between master thread + * and children + */ + if (pipe(lcore_config[i].pipe_master2slave) < 0) + rte_panic("Cannot create pipe\n"); + if (pipe(lcore_config[i].pipe_slave2master) < 0) + rte_panic("Cannot create pipe\n"); + + lcore_config[i].state = WAIT; + + /* create a thread for each lcore */ + ret = pthread_create(&lcore_config[i].thread_id, NULL, + eal_thread_loop, NULL); + if (ret != 0) + rte_panic("Cannot create thread\n"); + + /* Set thread_name for aid in debugging. */ + snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN, + "lcore-slave-%d", i); + ret = rte_thread_setname(lcore_config[i].thread_id, + thread_name); + if (ret != 0) + RTE_LOG(ERR, EAL, + "Cannot set name for lcore thread\n"); + } + + /* + * Launch a dummy function on all slave lcores, so that master lcore + * knows they are all ready when this function returns. + */ + rte_eal_mp_remote_launch(sync_func, NULL, SKIP_MASTER); + rte_eal_mp_wait_lcore(); + + /* Probe & Initialize PCI devices */ + if (rte_eal_pci_probe()) + rte_panic("Cannot probe PCI\n"); + + rte_eal_mcfg_complete(); + + return fctret; +} + +/* get core role */ +enum rte_lcore_role_t +rte_eal_lcore_role(unsigned lcore_id) +{ + return rte_config.lcore_role[lcore_id]; +} + +enum rte_proc_type_t +rte_eal_process_type(void) +{ + return rte_config.process_type; +} + +int rte_eal_has_hugepages(void) +{ + return ! internal_config.no_hugetlbfs; +} + +int +rte_eal_check_module(const char *module_name) +{ + char sysfs_mod_name[PATH_MAX]; + struct stat st; + int n; + + if (NULL == module_name) + return -1; + + /* Check if there is sysfs mounted */ + if (stat("/sys/module", &st) != 0) { + RTE_LOG(DEBUG, EAL, "sysfs is not mounted! error %i (%s)\n", + errno, strerror(errno)); + return -1; + } + + /* A module might be built-in, therefore try sysfs */ + n = snprintf(sysfs_mod_name, PATH_MAX, "/sys/module/%s", module_name); + if (n < 0 || n > PATH_MAX) { + RTE_LOG(DEBUG, EAL, "Could not format module path\n"); + return -1; + } + + if (stat(sysfs_mod_name, &st) != 0) { + RTE_LOG(DEBUG, EAL, "Module %s not found! error %i (%s)\n", + sysfs_mod_name, errno, strerror(errno)); + return 0; + } + + /* Module has been found */ + return 1; +} -- cgit 1.2.3-korg