From b63264c8342e6a1b6971c79550d2af2024b6a4de Mon Sep 17 00:00:00 2001 From: Luca Boccassi Date: Tue, 14 Aug 2018 18:52:30 +0100 Subject: New upstream version 18.08 Change-Id: I32fdf5e5016556d9c0a6d88ddaf1fc468961790a Signed-off-by: Luca Boccassi --- .../linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c | 2299 -------------------- 1 file changed, 2299 deletions(-) delete mode 100644 lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c (limited to 'lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c') diff --git a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c deleted file mode 100644 index 3f159123..00000000 --- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_82599.c +++ /dev/null @@ -1,2299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - Contact Information: - e1000-devel Mailing List - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_type.h" -#include "ixgbe_82599.h" -#include "ixgbe_api.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); -static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, - u16 offset, u16 *data); -static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data); -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data); - -void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - - /* enable the laser control functions for SFP+ fiber */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { - mac->ops.disable_tx_laser = - &ixgbe_disable_tx_laser_multispeed_fiber; - mac->ops.enable_tx_laser = - &ixgbe_enable_tx_laser_multispeed_fiber; - mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; - - } else { - mac->ops.disable_tx_laser = NULL; - mac->ops.enable_tx_laser = NULL; - mac->ops.flap_tx_laser = NULL; - } - - if (hw->phy.multispeed_fiber) { - /* Set up dual speed SFP+ support */ - mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; - } else { - if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) && - (hw->phy.smart_speed == ixgbe_smart_speed_auto || - hw->phy.smart_speed == ixgbe_smart_speed_on) && - !ixgbe_verify_lesm_fw_enabled_82599(hw)) { - mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; - } else { - mac->ops.setup_link = &ixgbe_setup_mac_link_82599; - } - } -} - -/** - * ixgbe_init_phy_ops_82599 - PHY/SFP specific init - * @hw: pointer to hardware structure - * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. - * - **/ -s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val = 0; - u32 esdp; - - if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { - /* Store flag indicating I2C bus access control unit. */ - hw->phy.qsfp_shared_i2c_bus = TRUE; - - /* Initialize access to QSFP+ I2C bus */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0_DIR; - esdp &= ~IXGBE_ESDP_SDP1_DIR; - esdp &= ~IXGBE_ESDP_SDP0; - esdp &= ~IXGBE_ESDP_SDP0_NATIVE; - esdp &= ~IXGBE_ESDP_SDP1_NATIVE; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; - phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; - } - /* Identify the PHY or SFP module */ - ret_val = phy->ops.identify(hw); - if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto init_phy_ops_out; - - /* Setup function pointers based on detected SFP module and speeds */ - ixgbe_init_mac_link_ops_82599(hw); - if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) - hw->phy.ops.reset = NULL; - - /* If copper media, overwrite with copper function pointers */ - if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { - mac->ops.setup_link = &ixgbe_setup_copper_link_82599; - mac->ops.get_link_capabilities = - &ixgbe_get_copper_link_capabilities_generic; - } - - /* Set necessary function pointers based on phy type */ - switch (hw->phy.type) { - case ixgbe_phy_tn: - phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; - phy->ops.check_link = &ixgbe_check_phy_link_tnx; - phy->ops.get_firmware_version = - &ixgbe_get_phy_firmware_version_tnx; - break; - default: - break; - } -init_phy_ops_out: - return ret_val; -} - -s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - u32 reg_anlp1 = 0; - u32 i = 0; - u16 list_offset, data_offset, data_value; - - if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { - ixgbe_init_mac_link_ops_82599(hw); - - hw->phy.ops.reset = NULL; - - ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, - &data_offset); - if (ret_val != 0) - goto setup_sfp_out; - - /* PHY config will finish before releasing the semaphore */ - ret_val = hw->mac.ops.acquire_swfw_sync(hw, - IXGBE_GSSR_MAC_CSR_SM); - if (ret_val != 0) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto setup_sfp_out; - } - - hw->eeprom.ops.read(hw, ++data_offset, &data_value); - while (data_value != 0xffff) { - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); - IXGBE_WRITE_FLUSH(hw); - hw->eeprom.ops.read(hw, ++data_offset, &data_value); - } - - /* Release the semaphore */ - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); - /* Delay obtaining semaphore again to allow FW access */ - msleep(hw->eeprom.semaphore_delay); - - /* Now restart DSP by setting Restart_AN and clearing LMS */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, - IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | - IXGBE_AUTOC_AN_RESTART)); - - /* Wait for AN to leave state 0 */ - for (i = 0; i < 10; i++) { - msleep(4); - reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); - if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) - break; - } - if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { - hw_dbg(hw, "sfp module setup not complete\n"); - ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; - goto setup_sfp_out; - } - - /* Restart DSP by setting Restart_AN and return to SFI mode */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, - IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | - IXGBE_AUTOC_AN_RESTART)); - } - -setup_sfp_out: - return ret_val; -} - -/** - * ixgbe_init_ops_82599 - Inits func ptrs and MAC type - * @hw: pointer to hardware structure - * - * Initialize the function pointers and assign the MAC type for 82599. - * Does not touch the hardware. - **/ - -s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) -{ - struct ixgbe_mac_info *mac = &hw->mac; - struct ixgbe_phy_info *phy = &hw->phy; - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val; - - ixgbe_init_phy_ops_generic(hw); - ret_val = ixgbe_init_ops_generic(hw); - - /* PHY */ - phy->ops.identify = &ixgbe_identify_phy_82599; - phy->ops.init = &ixgbe_init_phy_ops_82599; - - /* MAC */ - mac->ops.reset_hw = &ixgbe_reset_hw_82599; - mac->ops.get_media_type = &ixgbe_get_media_type_82599; - mac->ops.get_supported_physical_layer = - &ixgbe_get_supported_physical_layer_82599; - mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic; - mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic; - mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599; - mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599; - mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599; - mac->ops.start_hw = &ixgbe_start_hw_82599; - mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic; - mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic; - mac->ops.get_device_caps = &ixgbe_get_device_caps_generic; - mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic; - mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic; - - /* RAR, Multicast, VLAN */ - mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; - mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic; - mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; - mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; - mac->rar_highwater = 1; - mac->ops.set_vfta = &ixgbe_set_vfta_generic; - mac->ops.set_vlvf = &ixgbe_set_vlvf_generic; - mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; - mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; - mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599; - mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing; - mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing; - - /* Link */ - mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599; - mac->ops.check_link = &ixgbe_check_mac_link_generic; - mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic; - ixgbe_init_mac_link_ops_82599(hw); - - mac->mcft_size = 128; - mac->vft_size = 128; - mac->num_rar_entries = 128; - mac->rx_pb_size = 512; - mac->max_tx_queues = 128; - mac->max_rx_queues = 128; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); - - mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) & - IXGBE_FWSM_MODE_MASK) ? true : false; - - //hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; - - /* EEPROM */ - eeprom->ops.read = &ixgbe_read_eeprom_82599; - eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599; - - /* Manageability interface */ - mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic; - - mac->ops.get_thermal_sensor_data = - &ixgbe_get_thermal_sensor_data_generic; - mac->ops.init_thermal_sensor_thresh = - &ixgbe_init_thermal_sensor_thresh_generic; - - return ret_val; -} - -/** - * ixgbe_get_link_capabilities_82599 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled - * - * Determines the link capabilities by reading the AUTOC register. - **/ -s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *negotiation) -{ - s32 status = 0; - u32 autoc = 0; - - /* Check if 1G SFP module. */ - if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - goto out; - } - - /* - * Determine link capabilities based on the stored value of AUTOC, - * which represents EEPROM defaults. If AUTOC value has not - * been stored, use the current register values. - */ - if (hw->mac.orig_link_settings_stored) - autoc = hw->mac.orig_autoc; - else - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_1G_AN: - *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_10G_SERIAL: - *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; - break; - - case IXGBE_AUTOC_LMS_KX4_KX_KR: - case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: - *speed = IXGBE_LINK_SPEED_UNKNOWN; - if (autoc & IXGBE_AUTOC_KR_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX_SUPP) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: - *speed = IXGBE_LINK_SPEED_100_FULL; - if (autoc & IXGBE_AUTOC_KR_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (autoc & IXGBE_AUTOC_KX_SUPP) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - break; - - case IXGBE_AUTOC_LMS_SGMII_1G_100M: - *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; - break; - - default: - status = IXGBE_ERR_LINK_SETUP; - goto out; - break; - } - - if (hw->phy.multispeed_fiber) { - *speed |= IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; - } - -out: - return status; -} - -/** - * ixgbe_get_media_type_82599 - Get media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) -{ - enum ixgbe_media_type media_type; - - /* Detect if there is a copper PHY attached. */ - switch (hw->phy.type) { - case ixgbe_phy_cu_unknown: - case ixgbe_phy_tn: - media_type = ixgbe_media_type_copper; - goto out; - default: - break; - } - - switch (hw->device_id) { - case IXGBE_DEV_ID_82599_KX4: - case IXGBE_DEV_ID_82599_KX4_MEZZ: - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - case IXGBE_DEV_ID_82599_KR: - case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: - case IXGBE_DEV_ID_82599_XAUI_LOM: - /* Default device ID is mezzanine card KX/KX4 */ - media_type = ixgbe_media_type_backplane; - break; - case IXGBE_DEV_ID_82599_SFP: - case IXGBE_DEV_ID_82599_SFP_FCOE: - case IXGBE_DEV_ID_82599_SFP_EM: - case IXGBE_DEV_ID_82599_SFP_SF2: - case IXGBE_DEV_ID_82599EN_SFP: - media_type = ixgbe_media_type_fiber; - break; - case IXGBE_DEV_ID_82599_CX4: - media_type = ixgbe_media_type_cx4; - break; - case IXGBE_DEV_ID_82599_T3_LOM: - media_type = ixgbe_media_type_copper; - break; - case IXGBE_DEV_ID_82599_LS: - media_type = ixgbe_media_type_fiber_lco; - break; - case IXGBE_DEV_ID_82599_QSFP_SF_QP: - media_type = ixgbe_media_type_fiber_qsfp; - break; - default: - media_type = ixgbe_media_type_unknown; - break; - } -out: - return media_type; -} - -/** - * ixgbe_start_mac_link_82599 - Setup MAC link settings - * @hw: pointer to hardware structure - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. - **/ -s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, - bool autoneg_wait_to_complete) -{ - u32 autoc_reg; - u32 links_reg = 0; - u32 i; - s32 status = 0; - - /* Restart link */ - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - /* Only poll for autoneg to complete if specified to do so */ - if (autoneg_wait_to_complete) { - if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR || - (autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - (autoc_reg & IXGBE_AUTOC_LMS_MASK) == - IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - if (links_reg & IXGBE_LINKS_KX_AN_COMP) - break; - msleep(100); - } - if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { - status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autoneg did not complete.\n"); - } - } - } - - /* Add delay to filter out noises during initial link setup */ - msleep(50); - - return status; -} - -/** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. - **/ -void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - - /* Disable tx laser; allow 100us to go dark per spec */ - esdp_reg |= IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - udelay(100); -} - -/** - * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively turning on the Tx - * laser on the PHY, effectively starting physical link. - **/ -void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - - /* Enable tx laser; allow 100ms to light up */ - esdp_reg &= ~IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(100); -} - -/** - * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser - * @hw: pointer to hardware structure - * - * When the driver changes the link speeds that it can support, - * it sets autotry_restart to true to indicate that we need to - * initiate a new autotry session with the link partner. To do - * so, we set the speed then disable and re-enable the tx laser, to - * alert the link partner that it also needs to restart autotry on its - * end. This is consistent with true clause 37 autoneg, which also - * involves a loss of signal. - **/ -void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) -{ - if (hw->mac.autotry_restart) { - ixgbe_disable_tx_laser_multispeed_fiber(hw); - ixgbe_enable_tx_laser_multispeed_fiber(hw); - hw->mac.autotry_restart = false; - } -} - -/** - * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Set the link speed in the AUTOC register and restarts link. - **/ -s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; - u32 speedcnt = 0; - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - u32 i = 0; - bool link_up = false; - bool negotiation; - - /* Mask off requested but non-supported speeds */ - status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation); - if (status != 0) - return status; - - speed &= link_speed; - - /* - * Try each speed one by one, highest priority first. We do this in - * software because 10gb fiber doesn't support speed autonegotiation. - */ - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - speedcnt++; - highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - - /* Allow module to change analog characteristics (1G->10G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_10GB_FULL, - autoneg, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - ixgbe_flap_tx_laser(hw); - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted. 82599 uses the same timing for 10g SFI. - */ - for (i = 0; i < 5; i++) { - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, - &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - speedcnt++; - if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) - highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - - /* Allow module to change analog characteristics (10G->1G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_1GB_FULL, - autoneg, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - ixgbe_flap_tx_laser(hw); - - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - - /* - * We didn't get link. Configure back to the highest speed we tried, - * (if there was more than one). We call ourselves back with just the - * single highest speed that the user requested. - */ - if (speedcnt > 1) - status = ixgbe_setup_mac_link_multispeed_fiber(hw, - highest_link_speed, autoneg, autoneg_wait_to_complete); - -out: - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - return status; -} - -/** - * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Implements the Intel SmartSpeed algorithm. - **/ -s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - s32 i, j; - bool link_up = false; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - if (speed & IXGBE_LINK_SPEED_100_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; - - /* - * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the - * autoneg advertisement if link is unable to be established at the - * highest negotiated rate. This can sometimes happen due to integrity - * issues with the physical media connection. - */ - - /* First, try to get link with full advertisement */ - hw->phy.smart_speed_active = false; - for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - if (status != 0) - goto out; - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per - * Table 9 in the AN MAS. - */ - for (i = 0; i < 5; i++) { - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - goto out; - - if (link_up) - goto out; - } - } - - /* - * We didn't get link. If we advertised KR plus one of KX4/KX - * (or BX4/BX), then disable KR and try again. - */ - if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || - ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) - goto out; - - /* Turn SmartSpeed on to disable KR support */ - hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - if (status != 0) - goto out; - - /* - * Wait for the controller to acquire link. 600ms will allow for - * the AN link_fail_inhibit_timer as well for multiple cycles of - * parallel detect, both 10g and 1g. This allows for the maximum - * connect attempts as defined in the AN MAS table 73-7. - */ - for (i = 0; i < 6; i++) { - msleep(100); - - /* If we have link, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != 0) - goto out; - - if (link_up) - goto out; - } - - /* We didn't get link. Turn SmartSpeed back off. */ - hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, - autoneg_wait_to_complete); - -out: - if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) - hw_dbg(hw, "Smartspeed has downgraded the link speed " - "from the maximum advertised\n"); - return status; -} - -/** - * ixgbe_setup_mac_link_82599 - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true when waiting for completion is needed - * - * Set the link speed in the AUTOC register and restarts link. - **/ -s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status = 0; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 start_autoc = autoc; - u32 orig_autoc = 0; - u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 links_reg = 0; - u32 i; - ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; - - /* Check to see if speed passed in is supported. */ - status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); - if (status != 0) - goto out; - - speed &= link_capabilities; - - if (speed == IXGBE_LINK_SPEED_UNKNOWN) { - status = IXGBE_ERR_LINK_SETUP; - goto out; - } - - /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ - if (hw->mac.orig_link_settings_stored) - orig_autoc = hw->mac.orig_autoc; - else - orig_autoc = autoc; - - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - /* Set KX4/KX/KR support according to speed requested */ - autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) - autoc |= IXGBE_AUTOC_KX4_SUPP; - if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && - (hw->phy.smart_speed_active == false)) - autoc |= IXGBE_AUTOC_KR_SUPP; - } - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - autoc |= IXGBE_AUTOC_KX_SUPP; - } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || - link_mode == IXGBE_AUTOC_LMS_1G_AN)) { - /* Switch from 1G SFI to 10G SFI if requested */ - if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && - (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { - autoc &= ~IXGBE_AUTOC_LMS_MASK; - autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; - } - } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && - (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { - /* Switch from 10G SFI to 1G SFI if requested */ - if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && - (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { - autoc &= ~IXGBE_AUTOC_LMS_MASK; - if (autoneg) - autoc |= IXGBE_AUTOC_LMS_1G_AN; - else - autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; - } - } - - if (autoc != start_autoc) { - /* Restart link */ - autoc |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); - - /* Only poll for autoneg to complete if specified to do so */ - if (autoneg_wait_to_complete) { - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || - link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { - for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { - links_reg = - IXGBE_READ_REG(hw, IXGBE_LINKS); - if (links_reg & IXGBE_LINKS_KX_AN_COMP) - break; - msleep(100); - } - if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { - status = - IXGBE_ERR_AUTONEG_NOT_COMPLETE; - hw_dbg(hw, "Autoneg did not complete.\n"); - } - } - } - - /* Add delay to filter out noises during initial link setup */ - msleep(50); - } - -out: - return status; -} - -/** - * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * @autoneg_wait_to_complete: true if waiting is needed to complete - * - * Restarts link on PHY and MAC based on settings passed in. - **/ -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - s32 status; - - /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, - autoneg_wait_to_complete); - /* Set up MAC */ - ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); - - return status; -} - -/** - * ixgbe_reset_hw_82599 - Perform hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. - **/ -s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) -{ -// ixgbe_link_speed link_speed; - s32 status = 0; -// u32 ctrl, i, autoc, autoc2; -// bool link_up = false; - -#if 0 - /* Call adapter stop to disable tx/rx and clear interrupts */ - status = hw->mac.ops.stop_adapter(hw); - if (status != 0) - goto reset_hw_out; - - /* flush pending Tx transactions */ - ixgbe_clear_tx_pending(hw); - - /* PHY ops must be identified and initialized prior to reset */ - - /* Identify PHY and related function pointers */ - status = hw->phy.ops.init(hw); - - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; - - /* Setup SFP module if there is one present. */ - if (hw->phy.sfp_setup_needed) { - status = hw->mac.ops.setup_sfp(hw); - hw->phy.sfp_setup_needed = false; - } - - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; - - /* Reset PHY */ - if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) - hw->phy.ops.reset(hw); - -mac_reset_top: - /* - * Issue global reset to the MAC. Needs to be SW reset if link is up. - * If link reset is used when link is up, it might reset the PHY when - * mng is using it. If link is down or the flag to force full link - * reset is set, then perform link reset. - */ - ctrl = IXGBE_CTRL_LNK_RST; - if (!hw->force_full_reset) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up) - ctrl = IXGBE_CTRL_RST; - } - - ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); - IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll for reset bit to self-clear indicating reset is complete */ - for (i = 0; i < 10; i++) { - udelay(1); - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST_MASK)) - break; - } - - if (ctrl & IXGBE_CTRL_RST_MASK) { - status = IXGBE_ERR_RESET_FAILED; - hw_dbg(hw, "Reset polling failed to complete.\n"); - } - - msleep(50); - - /* - * Double resets are required for recovery from certain error - * conditions. Between resets, it is necessary to stall to allow time - * for any pending HW events to complete. - */ - if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { - hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - goto mac_reset_top; - } - - /* - * Store the original AUTOC/AUTOC2 values if they have not been - * stored off yet. Otherwise restore the stored original - * values since the reset operation sets back to defaults. - */ - autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - if (hw->mac.orig_link_settings_stored == false) { - hw->mac.orig_autoc = autoc; - hw->mac.orig_autoc2 = autoc2; - hw->mac.orig_link_settings_stored = true; - } else { - if (autoc != hw->mac.orig_autoc) - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | - IXGBE_AUTOC_AN_RESTART)); - - if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != - (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { - autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; - autoc2 |= (hw->mac.orig_autoc2 & - IXGBE_AUTOC2_UPPER_MASK); - IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); - } - } -#endif - - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - - /* - * Store MAC address from RAR0, clear receive address registers, and - * clear the multicast table. Also reset num_rar_entries to 128, - * since we modify this value when programming the SAN MAC address. - */ - hw->mac.num_rar_entries = 128; - hw->mac.ops.init_rx_addrs(hw); - - /* Store the permanent SAN mac address */ - hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); - - /* Add the SAN MAC address to the RAR only if it's a valid address */ - if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { - hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); - - /* Save the SAN MAC RAR index */ - hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; - - /* Reserve the last RAR for the SAN MAC address */ - hw->mac.num_rar_entries--; - } - - /* Store the alternative WWNN/WWPN prefix */ - hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, - &hw->mac.wwpn_prefix); - -//reset_hw_out: - return status; -} - -/** - * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) -{ - int i; - u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); - fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; - - /* - * Before starting reinitialization process, - * FDIRCMD.CMD must be zero. - */ - for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { - if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - IXGBE_FDIRCMD_CMD_MASK)) - break; - udelay(10); - } - if (i >= IXGBE_FDIRCMD_CMD_POLL) { - hw_dbg(hw, "Flow Director previous command isn't complete, " - "aborting table re-initialization.\n"); - return IXGBE_ERR_FDIR_REINIT_FAILED; - } - - IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); - IXGBE_WRITE_FLUSH(hw); - /* - * 82599 adapters flow director init flow cannot be restarted, - * Workaround 82599 silicon errata by performing the following steps - * before re-writing the FDIRCTRL control register with the same value. - * - write 1 to bit 8 of FDIRCMD register & - * - write 0 to bit 8 of FDIRCMD register - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | - IXGBE_FDIRCMD_CLEARHT)); - IXGBE_WRITE_FLUSH(hw); - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & - ~IXGBE_FDIRCMD_CLEARHT)); - IXGBE_WRITE_FLUSH(hw); - /* - * Clear FDIR Hash register to clear any leftover hashes - * waiting to be programmed. - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); - IXGBE_WRITE_FLUSH(hw); - - IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll init-done after we write FDIRCTRL register */ - for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { - if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) - break; - udelay(10); - } - if (i >= IXGBE_FDIR_INIT_DONE_POLL) { - hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); - return IXGBE_ERR_FDIR_REINIT_FAILED; - } - - /* Clear FDIR statistics registers (read to clear) */ - IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); - IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); - IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); - IXGBE_READ_REG(hw, IXGBE_FDIRMISS); - IXGBE_READ_REG(hw, IXGBE_FDIRLEN); - - return 0; -} - -/** - * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register - **/ -static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - int i; - - /* Prime the keys for hashing */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); - IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); - - /* - * Poll init-done after we write the register. Estimated times: - * 10G: PBALLOC = 11b, timing is 60us - * 1G: PBALLOC = 11b, timing is 600us - * 100M: PBALLOC = 11b, timing is 6ms - * - * Multiple these timings by 4 if under full Rx load - * - * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for - * 1 msec per poll time. If we're at line rate and drop to 100M, then - * this might not finish in our poll time, but we can live with that - * for now. - */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); - IXGBE_WRITE_FLUSH(hw); - for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { - if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & - IXGBE_FDIRCTRL_INIT_DONE) - break; - msleep(1); - } - - if (i >= IXGBE_FDIR_INIT_DONE_POLL) - hw_dbg(hw, "Flow Director poll time exceeded!\n"); -} - -/** - * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially - * contains just the value of the Rx packet buffer allocation - **/ -s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - /* - * Continue setup of fdirctrl register bits: - * Move the flexible bytes to use the ethertype - shift 6 words - * Set the maximum length per hash bucket to 0xA filters - * Send interrupt when 64 filters are left - */ - fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | - (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | - (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); - - /* write hashes and fdirctrl register, poll for completion */ - ixgbe_fdir_enable_82599(hw, fdirctrl); - - return 0; -} - -/** - * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters - * @hw: pointer to hardware structure - * @fdirctrl: value to write to flow director control register, initially - * contains just the value of the Rx packet buffer allocation - **/ -s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) -{ - /* - * Continue setup of fdirctrl register bits: - * Turn perfect match filtering on - * Report hash in RSS field of Rx wb descriptor - * Initialize the drop queue - * Move the flexible bytes to use the ethertype - shift 6 words - * Set the maximum length per hash bucket to 0xA filters - * Send interrupt when 64 (0x4 * 16) filters are left - */ - fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | - IXGBE_FDIRCTRL_REPORT_STATUS | - (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | - (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | - (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | - (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); - - /* write hashes and fdirctrl register, poll for completion */ - ixgbe_fdir_enable_82599(hw, fdirctrl); - - return 0; -} - -/* - * These defines allow us to quickly generate all of the necessary instructions - * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION - * for values 0 through 15 - */ -#define IXGBE_ATR_COMMON_HASH_KEY \ - (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) -#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ -do { \ - u32 n = (_n); \ - if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ - common_hash ^= lo_hash_dword >> n; \ - else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ - bucket_hash ^= lo_hash_dword >> n; \ - else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ - sig_hash ^= lo_hash_dword << (16 - n); \ - if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ - common_hash ^= hi_hash_dword >> n; \ - else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ - bucket_hash ^= hi_hash_dword >> n; \ - else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ - sig_hash ^= hi_hash_dword << (16 - n); \ -} while (0); - -/** - * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash - * @stream: input bitstream to compute the hash on - * - * This function is almost identical to the function above but contains - * several optomizations such as unwinding all of the loops, letting the - * compiler work out all of the conditional ifs since the keys are static - * defines, and computing two keys at once since the hashed dword stream - * will be the same for both keys. - **/ -u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common) -{ - u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; - u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; - - /* record the flow_vm_vlan bits as they are a key part to the hash */ - flow_vm_vlan = IXGBE_NTOHL(input.dword); - - /* generate common hash dword */ - hi_hash_dword = IXGBE_NTOHL(common.dword); - - /* low dword is word swapped version of common */ - lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); - - /* apply flow ID/VM pool/VLAN ID bits to hash words */ - hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); - - /* Process bits 0 and 16 */ - IXGBE_COMPUTE_SIG_HASH_ITERATION(0); - - /* - * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to - * delay this because bit 0 of the stream should not be processed - * so we do not add the vlan until after bit 0 was processed - */ - lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); - - /* Process remaining 30 bit of the key */ - IXGBE_COMPUTE_SIG_HASH_ITERATION(1); - IXGBE_COMPUTE_SIG_HASH_ITERATION(2); - IXGBE_COMPUTE_SIG_HASH_ITERATION(3); - IXGBE_COMPUTE_SIG_HASH_ITERATION(4); - IXGBE_COMPUTE_SIG_HASH_ITERATION(5); - IXGBE_COMPUTE_SIG_HASH_ITERATION(6); - IXGBE_COMPUTE_SIG_HASH_ITERATION(7); - IXGBE_COMPUTE_SIG_HASH_ITERATION(8); - IXGBE_COMPUTE_SIG_HASH_ITERATION(9); - IXGBE_COMPUTE_SIG_HASH_ITERATION(10); - IXGBE_COMPUTE_SIG_HASH_ITERATION(11); - IXGBE_COMPUTE_SIG_HASH_ITERATION(12); - IXGBE_COMPUTE_SIG_HASH_ITERATION(13); - IXGBE_COMPUTE_SIG_HASH_ITERATION(14); - IXGBE_COMPUTE_SIG_HASH_ITERATION(15); - - /* combine common_hash result with signature and bucket hashes */ - bucket_hash ^= common_hash; - bucket_hash &= IXGBE_ATR_HASH_MASK; - - sig_hash ^= common_hash << 16; - sig_hash &= IXGBE_ATR_HASH_MASK << 16; - - /* return completed signature hash */ - return sig_hash ^ bucket_hash; -} - -/** - * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter - * @hw: pointer to hardware structure - * @input: unique input dword - * @common: compressed common input dword - * @queue: queue index to direct traffic to - **/ -s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_hash_dword input, - union ixgbe_atr_hash_dword common, - u8 queue) -{ - u64 fdirhashcmd; - u32 fdircmd; - - /* - * Get the flow_type in order to program FDIRCMD properly - * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 - */ - switch (input.formatted.flow_type) { - case IXGBE_ATR_FLOW_TYPE_TCPV4: - case IXGBE_ATR_FLOW_TYPE_UDPV4: - case IXGBE_ATR_FLOW_TYPE_SCTPV4: - case IXGBE_ATR_FLOW_TYPE_TCPV6: - case IXGBE_ATR_FLOW_TYPE_UDPV6: - case IXGBE_ATR_FLOW_TYPE_SCTPV6: - break; - default: - hw_dbg(hw, " Error on flow type input\n"); - return IXGBE_ERR_CONFIG; - } - - /* configure FDIRCMD register */ - fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | - IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; - fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; - fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; - - /* - * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits - * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. - */ - fdirhashcmd = (u64)fdircmd << 32; - fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); - IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); - - hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); - - return 0; -} - -#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ -do { \ - u32 n = (_n); \ - if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ - bucket_hash ^= lo_hash_dword >> n; \ - if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ - bucket_hash ^= hi_hash_dword >> n; \ -} while (0); - -/** - * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash - * @atr_input: input bitstream to compute the hash on - * @input_mask: mask for the input bitstream - * - * This function serves two main purposes. First it applys the input_mask - * to the atr_input resulting in a cleaned up atr_input data stream. - * Secondly it computes the hash and stores it in the bkt_hash field at - * the end of the input byte stream. This way it will be available for - * future use without needing to recompute the hash. - **/ -void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, - union ixgbe_atr_input *input_mask) -{ - - u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; - u32 bucket_hash = 0; - - /* Apply masks to input data */ - input->dword_stream[0] &= input_mask->dword_stream[0]; - input->dword_stream[1] &= input_mask->dword_stream[1]; - input->dword_stream[2] &= input_mask->dword_stream[2]; - input->dword_stream[3] &= input_mask->dword_stream[3]; - input->dword_stream[4] &= input_mask->dword_stream[4]; - input->dword_stream[5] &= input_mask->dword_stream[5]; - input->dword_stream[6] &= input_mask->dword_stream[6]; - input->dword_stream[7] &= input_mask->dword_stream[7]; - input->dword_stream[8] &= input_mask->dword_stream[8]; - input->dword_stream[9] &= input_mask->dword_stream[9]; - input->dword_stream[10] &= input_mask->dword_stream[10]; - - /* record the flow_vm_vlan bits as they are a key part to the hash */ - flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]); - - /* generate common hash dword */ - hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^ - input->dword_stream[2] ^ - input->dword_stream[3] ^ - input->dword_stream[4] ^ - input->dword_stream[5] ^ - input->dword_stream[6] ^ - input->dword_stream[7] ^ - input->dword_stream[8] ^ - input->dword_stream[9] ^ - input->dword_stream[10]); - - /* low dword is word swapped version of common */ - lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); - - /* apply flow ID/VM pool/VLAN ID bits to hash words */ - hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); - - /* Process bits 0 and 16 */ - IXGBE_COMPUTE_BKT_HASH_ITERATION(0); - - /* - * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to - * delay this because bit 0 of the stream should not be processed - * so we do not add the vlan until after bit 0 was processed - */ - lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); - - /* Process remaining 30 bit of the key */ - IXGBE_COMPUTE_BKT_HASH_ITERATION(1); - IXGBE_COMPUTE_BKT_HASH_ITERATION(2); - IXGBE_COMPUTE_BKT_HASH_ITERATION(3); - IXGBE_COMPUTE_BKT_HASH_ITERATION(4); - IXGBE_COMPUTE_BKT_HASH_ITERATION(5); - IXGBE_COMPUTE_BKT_HASH_ITERATION(6); - IXGBE_COMPUTE_BKT_HASH_ITERATION(7); - IXGBE_COMPUTE_BKT_HASH_ITERATION(8); - IXGBE_COMPUTE_BKT_HASH_ITERATION(9); - IXGBE_COMPUTE_BKT_HASH_ITERATION(10); - IXGBE_COMPUTE_BKT_HASH_ITERATION(11); - IXGBE_COMPUTE_BKT_HASH_ITERATION(12); - IXGBE_COMPUTE_BKT_HASH_ITERATION(13); - IXGBE_COMPUTE_BKT_HASH_ITERATION(14); - IXGBE_COMPUTE_BKT_HASH_ITERATION(15); - - /* - * Limit hash to 13 bits since max bucket count is 8K. - * Store result at the end of the input stream. - */ - input->formatted.bkt_hash = bucket_hash & 0x1FFF; -} - -/** - * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks - * @input_mask: mask to be bit swapped - * - * The source and destination port masks for flow director are bit swapped - * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to - * generate a correctly swapped value we need to bit swap the mask and that - * is what is accomplished by this function. - **/ -static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) -{ - u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port); - mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; - mask |= IXGBE_NTOHS(input_mask->formatted.src_port); - mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); - mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); - mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); - return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); -} - -/* - * These two macros are meant to address the fact that we have registers - * that are either all or in part big-endian. As a result on big-endian - * systems we will end up byte swapping the value to little-endian before - * it is byte swapped again and written to the hardware in the original - * big-endian format. - */ -#define IXGBE_STORE_AS_BE32(_value) \ - (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ - (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) - -#define IXGBE_WRITE_REG_BE32(a, reg, value) \ - IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value))) - -#define IXGBE_STORE_AS_BE16(_value) \ - IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8)) - -s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input_mask) -{ - /* mask IPv6 since it is currently not supported */ - u32 fdirm = IXGBE_FDIRM_DIPv6; - u32 fdirtcpm; - - /* - * Program the relevant mask registers. If src/dst_port or src/dst_addr - * are zero, then assume a full mask for that field. Also assume that - * a VLAN of 0 is unspecified, so mask that out as well. L4type - * cannot be masked out in this implementation. - * - * This also assumes IPv4 only. IPv6 masking isn't supported at this - * point in time. - */ - - /* verify bucket hash is cleared on hash generation */ - if (input_mask->formatted.bkt_hash) - hw_dbg(hw, " bucket hash should always be 0 in mask\n"); - - /* Program FDIRM and verify partial masks */ - switch (input_mask->formatted.vm_pool & 0x7F) { - case 0x0: - fdirm |= IXGBE_FDIRM_POOL; - case 0x7F: - break; - default: - hw_dbg(hw, " Error on vm pool mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { - case 0x0: - fdirm |= IXGBE_FDIRM_L4P; - if (input_mask->formatted.dst_port || - input_mask->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port mask\n"); - return IXGBE_ERR_CONFIG; - } - case IXGBE_ATR_L4TYPE_MASK: - break; - default: - hw_dbg(hw, " Error on flow type mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) { - case 0x0000: - /* mask VLAN ID, fall through to mask VLAN priority */ - fdirm |= IXGBE_FDIRM_VLANID; - case 0x0FFF: - /* mask VLAN priority */ - fdirm |= IXGBE_FDIRM_VLANP; - break; - case 0xE000: - /* mask VLAN ID only, fall through */ - fdirm |= IXGBE_FDIRM_VLANID; - case 0xEFFF: - /* no VLAN fields masked */ - break; - default: - hw_dbg(hw, " Error on VLAN mask\n"); - return IXGBE_ERR_CONFIG; - } - - switch (input_mask->formatted.flex_bytes & 0xFFFF) { - case 0x0000: - /* Mask Flex Bytes, fall through */ - fdirm |= IXGBE_FDIRM_FLEX; - case 0xFFFF: - break; - default: - hw_dbg(hw, " Error on flexible byte mask\n"); - return IXGBE_ERR_CONFIG; - } - - /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); - - /* store the TCP/UDP port masks, bit reversed from port layout */ - fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); - - /* write both the same so that UDP and TCP use the same mask */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); - IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); - - /* store source and destination IP masks (big-enian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, - ~input_mask->formatted.src_ip[0]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, - ~input_mask->formatted.dst_ip[0]); - - return 0; -} - -s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id, u8 queue) -{ - u32 fdirport, fdirvlan, fdirhash, fdircmd; - - /* currently IPv6 is not supported, must be programmed with 0 */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), - input->formatted.src_ip[0]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), - input->formatted.src_ip[1]); - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), - input->formatted.src_ip[2]); - - /* record the source address (big-endian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); - - /* record the first 32 bits of the destination address (big-endian) */ - IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); - - /* record source and destination port (little-endian)*/ - fdirport = IXGBE_NTOHS(input->formatted.dst_port); - fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; - fdirport |= IXGBE_NTOHS(input->formatted.src_port); - IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); - - /* record vlan (little-endian) and flex_bytes(big-endian) */ - fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); - fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; - fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id); - IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); - - /* configure FDIRHASH register */ - fdirhash = input->formatted.bkt_hash; - fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - - /* - * flush all previous writes to make certain registers are - * programmed prior to issuing the command - */ - IXGBE_WRITE_FLUSH(hw); - - /* configure FDIRCMD register */ - fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | - IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; - if (queue == IXGBE_FDIR_DROP_QUEUE) - fdircmd |= IXGBE_FDIRCMD_DROP; - fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; - fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; - fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; - - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); - - return 0; -} - -s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - u16 soft_id) -{ - u32 fdirhash; - u32 fdircmd = 0; - u32 retry_count; - s32 err = 0; - - /* configure FDIRHASH register */ - fdirhash = input->formatted.bkt_hash; - fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - - /* flush hash to HW */ - IXGBE_WRITE_FLUSH(hw); - - /* Query if filter is present */ - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); - - for (retry_count = 10; retry_count; retry_count--) { - /* allow 10us for query to process */ - udelay(10); - /* verify query completed successfully */ - fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); - if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) - break; - } - - if (!retry_count) - err = IXGBE_ERR_FDIR_REINIT_FAILED; - - /* if filter exists in hardware then remove it */ - if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { - IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); - IXGBE_WRITE_FLUSH(hw); - IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, - IXGBE_FDIRCMD_CMD_REMOVE_FLOW); - } - - return err; -} - -/** - * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter - * @hw: pointer to hardware structure - * @input: input bitstream - * @input_mask: mask for the input bitstream - * @soft_id: software index for the filters - * @queue: queue index to direct traffic to - * - * Note that the caller to this function must lock before calling, since the - * hardware writes must be protected from one another. - **/ -s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, - union ixgbe_atr_input *input, - union ixgbe_atr_input *input_mask, - u16 soft_id, u8 queue) -{ - s32 err = IXGBE_ERR_CONFIG; - - /* - * Check flow_type formatting, and bail out before we touch the hardware - * if there's a configuration issue - */ - switch (input->formatted.flow_type) { - case IXGBE_ATR_FLOW_TYPE_IPV4: - input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK; - if (input->formatted.dst_port || input->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port\n"); - return IXGBE_ERR_CONFIG; - } - break; - case IXGBE_ATR_FLOW_TYPE_SCTPV4: - if (input->formatted.dst_port || input->formatted.src_port) { - hw_dbg(hw, " Error on src/dst port\n"); - return IXGBE_ERR_CONFIG; - } - case IXGBE_ATR_FLOW_TYPE_TCPV4: - case IXGBE_ATR_FLOW_TYPE_UDPV4: - input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | - IXGBE_ATR_L4TYPE_MASK; - break; - default: - hw_dbg(hw, " Error on flow type input\n"); - return err; - } - - /* program input mask into the HW */ - err = ixgbe_fdir_set_input_mask_82599(hw, input_mask); - if (err) - return err; - - /* apply mask and compute/store hash */ - ixgbe_atr_compute_perfect_hash_82599(input, input_mask); - - /* program filters to filter memory */ - return ixgbe_fdir_write_perfect_filter_82599(hw, input, - soft_id, queue); -} - -/** - * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value - * - * Performs read operation to Omer analog register specified. - **/ -s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) -{ - u32 core_ctl; - - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | - (reg << 8)); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); - *val = (u8)core_ctl; - - return 0; -} - -/** - * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register - * @hw: pointer to hardware structure - * @reg: atlas register to write - * @val: value to write - * - * Performs write operation to Omer analog register specified. - **/ -s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) -{ - u32 core_ctl; - - core_ctl = (reg << 8) | val; - IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); - IXGBE_WRITE_FLUSH(hw); - udelay(10); - - return 0; -} - -/** - * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware using the generic start_hw function - * and the generation start_hw function. - * Then performs revision-specific operations, if any. - **/ -s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - - ret_val = ixgbe_start_hw_generic(hw); - if (ret_val != 0) - goto out; - - ret_val = ixgbe_start_hw_gen2(hw); - if (ret_val != 0) - goto out; - - /* We need to run link autotry after the driver loads */ - hw->mac.autotry_restart = true; - - if (ret_val == 0) - ret_val = ixgbe_verify_fw_version_82599(hw); -out: - return ret_val; -} - -/** - * ixgbe_identify_phy_82599 - Get physical layer module - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - * If PHY already detected, maintains current PHY type in hw struct, - * otherwise executes the PHY detection routine. - **/ -s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_PHY_ADDR_INVALID; - - /* Detect PHY if not unknown - returns success if already detected. */ - status = ixgbe_identify_phy_generic(hw); - if (status != 0) { - /* 82599 10GBASE-T requires an external PHY */ - if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) - goto out; - else - status = ixgbe_identify_module_generic(hw); - } - - /* Set PHY type none if no PHY detected */ - if (hw->phy.type == ixgbe_phy_unknown) { - hw->phy.type = ixgbe_phy_none; - status = 0; - } - - /* Return error if SFP module has been detected but is not supported */ - if (hw->phy.type == ixgbe_phy_sfp_unsupported) - status = IXGBE_ERR_SFP_NOT_SUPPORTED; - -out: - return status; -} - -/** - * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) -{ - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); - u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; - u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; - u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; - u16 ext_ability = 0; - u8 comp_codes_10g = 0; - u8 comp_codes_1g = 0; - - hw->phy.ops.identify(hw); - - switch (hw->phy.type) { - case ixgbe_phy_tn: - case ixgbe_phy_cu_unknown: - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; - goto out; - default: - break; - } - - switch (autoc & IXGBE_AUTOC_LMS_MASK) { - case IXGBE_AUTOC_LMS_1G_AN: - case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: - if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | - IXGBE_PHYSICAL_LAYER_1000BASE_BX; - goto out; - } else - /* SFI mode so read SFP module */ - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: - if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; - goto out; - break; - case IXGBE_AUTOC_LMS_10G_SERIAL: - if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) - goto sfp_check; - break; - case IXGBE_AUTOC_LMS_KX4_KX_KR: - case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: - if (autoc & IXGBE_AUTOC_KX_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; - if (autoc & IXGBE_AUTOC_KX4_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; - if (autoc & IXGBE_AUTOC_KR_SUPP) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; - goto out; - break; - default: - goto out; - break; - } - -sfp_check: - /* SFP check must be done last since DA modules are sometimes used to - * test KR mode - we need to id KR mode correctly before SFP module. - * Call identify_sfp because the pluggable module may have changed */ - hw->phy.ops.identify_sfp(hw); - if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) - goto out; - - switch (hw->phy.type) { - case ixgbe_phy_sfp_passive_tyco: - case ixgbe_phy_sfp_passive_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_phy_sfp_ftl_active: - case ixgbe_phy_sfp_active_unknown: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; - break; - case ixgbe_phy_sfp_avago: - case ixgbe_phy_sfp_ftl: - case ixgbe_phy_sfp_intel: - case ixgbe_phy_sfp_unknown: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; - else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX; - break; - default: - break; - } - -out: - return physical_layer; -} - -/** - * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL - * - * Enables the Rx DMA unit for 82599 - **/ -s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) -{ - - /* - * Workaround for 82599 silicon errata when enabling the Rx datapath. - * If traffic is incoming before we enable the Rx unit, it could hang - * the Rx DMA unit. Therefore, make sure the security engine is - * completely disabled prior to enabling the Rx unit. - */ - - hw->mac.ops.disable_sec_rx_path(hw); - - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); - - hw->mac.ops.enable_sec_rx_path(hw); - - return 0; -} - -/** - * ixgbe_verify_fw_version_82599 - verify fw version for 82599 - * @hw: pointer to hardware structure - * - * Verifies that installed the firmware version is 0.6 or higher - * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. - * - * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or - * if the FW version is not supported. - **/ -static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_EEPROM_VERSION; - u16 fw_offset, fw_ptp_cfg_offset; - u16 fw_version = 0; - - /* firmware check is only necessary for SFI devices */ - if (hw->phy.media_type != ixgbe_media_type_fiber) { - status = 0; - goto fw_version_out; - } - - /* get the offset to the Firmware Module block */ - hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); - - if ((fw_offset == 0) || (fw_offset == 0xFFFF)) - goto fw_version_out; - - /* get the offset to the Pass Through Patch Configuration block */ - hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), - &fw_ptp_cfg_offset); - - if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) - goto fw_version_out; - - /* get the firmware version */ - hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + - IXGBE_FW_PATCH_VERSION_4), &fw_version); - - if (fw_version > 0x5) - status = 0; - -fw_version_out: - return status; -} - -/** - * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. - * @hw: pointer to hardware structure - * - * Returns true if the LESM FW module is present and enabled. Otherwise - * returns false. Smart Speed must be disabled if LESM FW module is enabled. - **/ -bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) -{ - bool lesm_enabled = false; - u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; - s32 status; - - /* get the offset to the Firmware Module block */ - status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); - - if ((status != 0) || - (fw_offset == 0) || (fw_offset == 0xFFFF)) - goto out; - - /* get the offset to the LESM Parameters block */ - status = hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_LESM_PARAMETERS_PTR), - &fw_lesm_param_offset); - - if ((status != 0) || - (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) - goto out; - - /* get the lesm state word */ - status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + - IXGBE_FW_LESM_STATE_1), - &fw_lesm_state); - - if ((status == 0) && - (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) - lesm_enabled = true; - -out: - return lesm_enabled; -} - -/** - * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using - * fastest available method - * - * @hw: pointer to hardware structure - * @offset: offset of word in EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM - * - * Retrieves 16 bit word(s) read from EEPROM - **/ -static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val = IXGBE_ERR_CONFIG; - - /* - * If EEPROM is detected and can be addressed using 14 bits, - * use EERD otherwise use bit bang - */ - if ((eeprom->type == ixgbe_eeprom_spi) && - (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) - ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, - data); - else - ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, - words, - data); - - return ret_val; -} - -/** - * ixgbe_read_eeprom_82599 - Read EEPROM word using - * fastest available method - * - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM - **/ -static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, - u16 offset, u16 *data) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - s32 ret_val = IXGBE_ERR_CONFIG; - - /* - * If EEPROM is detected and can be addressed using 14 bits, - * use EERD otherwise use bit bang - */ - if ((eeprom->type == ixgbe_eeprom_spi) && - (offset <= IXGBE_EERD_MAX_ADDR)) - ret_val = ixgbe_read_eerd_generic(hw, offset, data); - else - ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); - - return ret_val; -} - -/** - * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - u32 esdp; - s32 status; - s32 timeout = 200; - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Acquire I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - while (timeout) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - if (esdp & IXGBE_ESDP_SDP1) - break; - - msleep(5); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource," - " acquiring I2C bus timeout.\n"); - status = IXGBE_ERR_I2C; - goto release_i2c_access; - } - } - - status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); - -release_i2c_access: - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Release I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp &= ~IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - } - - return status; -} - -/** - * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface at - * a specified device address. - **/ -static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - u32 esdp; - s32 status; - s32 timeout = 200; - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Acquire I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp |= IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - - while (timeout) { - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - if (esdp & IXGBE_ESDP_SDP1) - break; - - msleep(5); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource," - " acquiring I2C bus timeout.\n"); - status = IXGBE_ERR_I2C; - goto release_i2c_access; - } - } - - status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); - -release_i2c_access: - - if (hw->phy.qsfp_shared_i2c_bus == TRUE) { - /* Release I2C bus ownership. */ - esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); - esdp &= ~IXGBE_ESDP_SDP0; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); - IXGBE_WRITE_FLUSH(hw); - } - - return status; -} -- cgit 1.2.3-korg