From 5129044dce1f85ce4950f31bcf90f3886466f06a Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:54:47 -0700 Subject: Imported upstream release 16.04 * gbp import-orig ../dpdk-16.04.tar.xz Change-Id: Iac2196db782ba322f6974d8a752acc34ce5024c3 Signed-off-by: C.J. Collier --- lib/librte_ether/rte_ethdev.h | 4286 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4286 insertions(+) create mode 100644 lib/librte_ether/rte_ethdev.h (limited to 'lib/librte_ether/rte_ethdev.h') diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h new file mode 100644 index 00000000..022733ec --- /dev/null +++ b/lib/librte_ether/rte_ethdev.h @@ -0,0 +1,4286 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _RTE_ETHDEV_H_ +#define _RTE_ETHDEV_H_ + +/** + * @file + * + * RTE Ethernet Device API + * + * The Ethernet Device API is composed of two parts: + * + * - The application-oriented Ethernet API that includes functions to setup + * an Ethernet device (configure it, setup its RX and TX queues and start it), + * to get its MAC address, the speed and the status of its physical link, + * to receive and to transmit packets, and so on. + * + * - The driver-oriented Ethernet API that exports a function allowing + * an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as + * an Ethernet device driver and as a PCI driver for a set of matching PCI + * [Ethernet] devices classes. + * + * By default, all the functions of the Ethernet Device API exported by a PMD + * are lock-free functions which assume to not be invoked in parallel on + * different logical cores to work on the same target object. For instance, + * the receive function of a PMD cannot be invoked in parallel on two logical + * cores to poll the same RX queue [of the same port]. Of course, this function + * can be invoked in parallel by different logical cores on different RX queues. + * It is the responsibility of the upper level application to enforce this rule. + * + * If needed, parallel accesses by multiple logical cores to shared queues + * shall be explicitly protected by dedicated inline lock-aware functions + * built on top of their corresponding lock-free functions of the PMD API. + * + * In all functions of the Ethernet API, the Ethernet device is + * designated by an integer >= 0 named the device port identifier. + * + * At the Ethernet driver level, Ethernet devices are represented by a generic + * data structure of type *rte_eth_dev*. + * + * Ethernet devices are dynamically registered during the PCI probing phase + * performed at EAL initialization time. + * When an Ethernet device is being probed, an *rte_eth_dev* structure and + * a new port identifier are allocated for that device. Then, the eth_dev_init() + * function supplied by the Ethernet driver matching the probed PCI + * device is invoked to properly initialize the device. + * + * The role of the device init function consists of resetting the hardware, + * checking access to Non-volatile Memory (NVM), reading the MAC address + * from NVM etc. + * + * If the device init operation is successful, the correspondence between + * the port identifier assigned to the new device and its associated + * *rte_eth_dev* structure is effectively registered. + * Otherwise, both the *rte_eth_dev* structure and the port identifier are + * freed. + * + * The functions exported by the application Ethernet API to setup a device + * designated by its port identifier must be invoked in the following order: + * - rte_eth_dev_configure() + * - rte_eth_tx_queue_setup() + * - rte_eth_rx_queue_setup() + * - rte_eth_dev_start() + * + * Then, the network application can invoke, in any order, the functions + * exported by the Ethernet API to get the MAC address of a given device, to + * get the speed and the status of a device physical link, to receive/transmit + * [burst of] packets, and so on. + * + * If the application wants to change the configuration (i.e. call + * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or + * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the + * device and then do the reconfiguration before calling rte_eth_dev_start() + * again. The tramsit and receive functions should not be invoked when the + * device is stopped. + * + * Please note that some configuration is not stored between calls to + * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will + * be retained: + * + * - flow control settings + * - receive mode configuration (promiscuous mode, hardware checksum mode, + * RSS/VMDQ settings etc.) + * - VLAN filtering configuration + * - MAC addresses supplied to MAC address array + * - flow director filtering mode (but not filtering rules) + * - NIC queue statistics mappings + * + * Any other configuration will not be stored and will need to be re-entered + * after a call to rte_eth_dev_start(). + * + * Finally, a network application can close an Ethernet device by invoking the + * rte_eth_dev_close() function. + * + * Each function of the application Ethernet API invokes a specific function + * of the PMD that controls the target device designated by its port + * identifier. + * For this purpose, all device-specific functions of an Ethernet driver are + * supplied through a set of pointers contained in a generic structure of type + * *eth_dev_ops*. + * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev* + * structure by the device init function of the Ethernet driver, which is + * invoked during the PCI probing phase, as explained earlier. + * + * In other words, each function of the Ethernet API simply retrieves the + * *rte_eth_dev* structure associated with the device port identifier and + * performs an indirect invocation of the corresponding driver function + * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure. + * + * For performance reasons, the address of the burst-oriented RX and TX + * functions of the Ethernet driver are not contained in the *eth_dev_ops* + * structure. Instead, they are directly stored at the beginning of the + * *rte_eth_dev* structure to avoid an extra indirect memory access during + * their invocation. + * + * RTE ethernet device drivers do not use interrupts for transmitting or + * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit + * functions to applications. + * Both receive and transmit functions are packet-burst oriented to minimize + * their cost per packet through the following optimizations: + * + * - Sharing among multiple packets the incompressible cost of the + * invocation of receive/transmit functions. + * + * - Enabling receive/transmit functions to take advantage of burst-oriented + * hardware features (L1 cache, prefetch instructions, NIC head/tail + * registers) to minimize the number of CPU cycles per packet, for instance, + * by avoiding useless read memory accesses to ring descriptors, or by + * systematically using arrays of pointers that exactly fit L1 cache line + * boundaries and sizes. + * + * The burst-oriented receive function does not provide any error notification, + * to avoid the corresponding overhead. As a hint, the upper-level application + * might check the status of the device link once being systematically returned + * a 0 value by the receive function of the driver for a given number of tries. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +#include + +/* Use this macro to check if LRO API is supported */ +#define RTE_ETHDEV_HAS_LRO_SUPPORT + +#include +#include +#include +#include +#include +#include "rte_ether.h" +#include "rte_eth_ctrl.h" +#include "rte_dev_info.h" + +struct rte_mbuf; + +/** + * A structure used to retrieve statistics for an Ethernet port. + */ +struct rte_eth_stats { + uint64_t ipackets; /**< Total number of successfully received packets. */ + uint64_t opackets; /**< Total number of successfully transmitted packets.*/ + uint64_t ibytes; /**< Total number of successfully received bytes. */ + uint64_t obytes; /**< Total number of successfully transmitted bytes. */ + uint64_t imissed; + /**< Total of RX packets dropped by the HW, + * because there are no available mbufs (i.e. RX queues are full). + */ + uint64_t ibadcrc __rte_deprecated; + /**< Deprecated; Total of RX packets with CRC error. */ + uint64_t ibadlen __rte_deprecated; + /**< Deprecated; Total of RX packets with bad length. */ + uint64_t ierrors; /**< Total number of erroneous received packets. */ + uint64_t oerrors; /**< Total number of failed transmitted packets. */ + uint64_t imcasts; + /**< Deprecated; Total number of multicast received packets. */ + uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */ + uint64_t fdirmatch __rte_deprecated; + /**< Deprecated; Total number of RX packets matching a filter. */ + uint64_t fdirmiss __rte_deprecated; + /**< Deprecated; Total number of RX packets not matching any filter. */ + uint64_t tx_pause_xon __rte_deprecated; + /**< Deprecated; Total nb. of XON pause frame sent. */ + uint64_t rx_pause_xon __rte_deprecated; + /**< Deprecated; Total nb. of XON pause frame received. */ + uint64_t tx_pause_xoff __rte_deprecated; + /**< Deprecated; Total nb. of XOFF pause frame sent. */ + uint64_t rx_pause_xoff __rte_deprecated; + /**< Deprecated; Total nb. of XOFF pause frame received. */ + uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; + /**< Total number of queue RX packets. */ + uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; + /**< Total number of queue TX packets. */ + uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS]; + /**< Total number of successfully received queue bytes. */ + uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS]; + /**< Total number of successfully transmitted queue bytes. */ + uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS]; + /**< Total number of queue packets received that are dropped. */ + uint64_t ilbpackets; + /**< Total number of good packets received from loopback,VF Only */ + uint64_t olbpackets; + /**< Total number of good packets transmitted to loopback,VF Only */ + uint64_t ilbbytes; + /**< Total number of good bytes received from loopback,VF Only */ + uint64_t olbbytes; + /**< Total number of good bytes transmitted to loopback,VF Only */ +}; + +/** + * Device supported speeds bitmap flags + */ +#define ETH_LINK_SPEED_AUTONEG (0 << 0) /**< Autonegotiate (all speeds) */ +#define ETH_LINK_SPEED_FIXED (1 << 0) /**< Disable autoneg (fixed speed) */ +#define ETH_LINK_SPEED_10M_HD (1 << 1) /**< 10 Mbps half-duplex */ +#define ETH_LINK_SPEED_10M (1 << 2) /**< 10 Mbps full-duplex */ +#define ETH_LINK_SPEED_100M_HD (1 << 3) /**< 100 Mbps half-duplex */ +#define ETH_LINK_SPEED_100M (1 << 4) /**< 100 Mbps full-duplex */ +#define ETH_LINK_SPEED_1G (1 << 5) /**< 1 Gbps */ +#define ETH_LINK_SPEED_2_5G (1 << 6) /**< 2.5 Gbps */ +#define ETH_LINK_SPEED_5G (1 << 7) /**< 5 Gbps */ +#define ETH_LINK_SPEED_10G (1 << 8) /**< 10 Gbps */ +#define ETH_LINK_SPEED_20G (1 << 9) /**< 20 Gbps */ +#define ETH_LINK_SPEED_25G (1 << 10) /**< 25 Gbps */ +#define ETH_LINK_SPEED_40G (1 << 11) /**< 40 Gbps */ +#define ETH_LINK_SPEED_50G (1 << 12) /**< 50 Gbps */ +#define ETH_LINK_SPEED_56G (1 << 13) /**< 56 Gbps */ +#define ETH_LINK_SPEED_100G (1 << 14) /**< 100 Gbps */ + +/** + * Ethernet numeric link speeds in Mbps + */ +#define ETH_SPEED_NUM_NONE 0 /**< Not defined */ +#define ETH_SPEED_NUM_10M 10 /**< 10 Mbps */ +#define ETH_SPEED_NUM_100M 100 /**< 100 Mbps */ +#define ETH_SPEED_NUM_1G 1000 /**< 1 Gbps */ +#define ETH_SPEED_NUM_2_5G 2500 /**< 2.5 Gbps */ +#define ETH_SPEED_NUM_5G 5000 /**< 5 Gbps */ +#define ETH_SPEED_NUM_10G 10000 /**< 10 Gbps */ +#define ETH_SPEED_NUM_20G 20000 /**< 20 Gbps */ +#define ETH_SPEED_NUM_25G 25000 /**< 25 Gbps */ +#define ETH_SPEED_NUM_40G 40000 /**< 40 Gbps */ +#define ETH_SPEED_NUM_50G 50000 /**< 50 Gbps */ +#define ETH_SPEED_NUM_56G 56000 /**< 56 Gbps */ +#define ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */ + +/** + * A structure used to retrieve link-level information of an Ethernet port. + */ +struct rte_eth_link { + uint32_t link_speed; /**< ETH_SPEED_NUM_ */ + uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */ + uint16_t link_autoneg : 1; /**< ETH_LINK_SPEED_[AUTONEG/FIXED] */ + uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */ +} __attribute__((aligned(8))); /**< aligned for atomic64 read/write */ + +/* Utility constants */ +#define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection. */ +#define ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection. */ +#define ETH_LINK_DOWN 0 /**< Link is down. */ +#define ETH_LINK_UP 1 /**< Link is up. */ +#define ETH_LINK_FIXED 0 /**< No autonegotiation. */ +#define ETH_LINK_AUTONEG 1 /**< Autonegotiated. */ + +/** + * A structure used to configure the ring threshold registers of an RX/TX + * queue for an Ethernet port. + */ +struct rte_eth_thresh { + uint8_t pthresh; /**< Ring prefetch threshold. */ + uint8_t hthresh; /**< Ring host threshold. */ + uint8_t wthresh; /**< Ring writeback threshold. */ +}; + +/** + * Simple flags are used for rte_eth_conf.rxmode.mq_mode. + */ +#define ETH_MQ_RX_RSS_FLAG 0x1 +#define ETH_MQ_RX_DCB_FLAG 0x2 +#define ETH_MQ_RX_VMDQ_FLAG 0x4 + +/** + * A set of values to identify what method is to be used to route + * packets to multiple queues. + */ +enum rte_eth_rx_mq_mode { + /** None of DCB,RSS or VMDQ mode */ + ETH_MQ_RX_NONE = 0, + + /** For RX side, only RSS is on */ + ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG, + /** For RX side,only DCB is on. */ + ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG, + /** Both DCB and RSS enable */ + ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG, + + /** Only VMDQ, no RSS nor DCB */ + ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG, + /** RSS mode with VMDQ */ + ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG, + /** Use VMDQ+DCB to route traffic to queues */ + ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG, + /** Enable both VMDQ and DCB in VMDq */ + ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG | + ETH_MQ_RX_VMDQ_FLAG, +}; + +/** + * for rx mq mode backward compatible + */ +#define ETH_RSS ETH_MQ_RX_RSS +#define VMDQ_DCB ETH_MQ_RX_VMDQ_DCB +#define ETH_DCB_RX ETH_MQ_RX_DCB + +/** + * A set of values to identify what method is to be used to transmit + * packets using multi-TCs. + */ +enum rte_eth_tx_mq_mode { + ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */ + ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */ + ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */ + ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */ +}; + +/** + * for tx mq mode backward compatible + */ +#define ETH_DCB_NONE ETH_MQ_TX_NONE +#define ETH_VMDQ_DCB_TX ETH_MQ_TX_VMDQ_DCB +#define ETH_DCB_TX ETH_MQ_TX_DCB + +/** + * A structure used to configure the RX features of an Ethernet port. + */ +struct rte_eth_rxmode { + /** The multi-queue packet distribution mode to be used, e.g. RSS. */ + enum rte_eth_rx_mq_mode mq_mode; + uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */ + uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ + uint16_t header_split : 1, /**< Header Split enable. */ + hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */ + hw_vlan_filter : 1, /**< VLAN filter enable. */ + hw_vlan_strip : 1, /**< VLAN strip enable. */ + hw_vlan_extend : 1, /**< Extended VLAN enable. */ + jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */ + hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */ + enable_scatter : 1, /**< Enable scatter packets rx handler */ + enable_lro : 1; /**< Enable LRO */ +}; + +/** + * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN. + * Note that single VLAN is treated the same as inner VLAN. + */ +enum rte_vlan_type { + ETH_VLAN_TYPE_UNKNOWN = 0, + ETH_VLAN_TYPE_INNER, /**< Single VLAN, or inner VLAN. */ + ETH_VLAN_TYPE_OUTER, /**< Outer VLAN. */ + ETH_VLAN_TYPE_MAX, +}; + +/** + * A structure used to configure the Receive Side Scaling (RSS) feature + * of an Ethernet port. + * If not NULL, the *rss_key* pointer of the *rss_conf* structure points + * to an array holding the RSS key to use for hashing specific header + * fields of received packets. The length of this array should be indicated + * by *rss_key_len* below. Otherwise, a default random hash key is used by + * the device driver. + * + * The *rss_key_len* field of the *rss_conf* structure indicates the length + * in bytes of the array pointed by *rss_key*. To be compatible, this length + * will be checked in i40e only. Others assume 40 bytes to be used as before. + * + * The *rss_hf* field of the *rss_conf* structure indicates the different + * types of IPv4/IPv6 packets to which the RSS hashing must be applied. + * Supplying an *rss_hf* equal to zero disables the RSS feature. + */ +struct rte_eth_rss_conf { + uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */ + uint8_t rss_key_len; /**< hash key length in bytes. */ + uint64_t rss_hf; /**< Hash functions to apply - see below. */ +}; + +/* + * The RSS offload types are defined based on flow types which are defined + * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload + * types. The supported flow types or RSS offload types can be queried by + * rte_eth_dev_info_get(). + */ +#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4) +#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4) +#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP) +#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP) +#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP) +#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER) +#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6) +#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6) +#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP) +#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP) +#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP) +#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER) +#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD) +#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX) +#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX) +#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX) + +#define ETH_RSS_IP ( \ + ETH_RSS_IPV4 | \ + ETH_RSS_FRAG_IPV4 | \ + ETH_RSS_NONFRAG_IPV4_OTHER | \ + ETH_RSS_IPV6 | \ + ETH_RSS_FRAG_IPV6 | \ + ETH_RSS_NONFRAG_IPV6_OTHER | \ + ETH_RSS_IPV6_EX) + +#define ETH_RSS_UDP ( \ + ETH_RSS_NONFRAG_IPV4_UDP | \ + ETH_RSS_NONFRAG_IPV6_UDP | \ + ETH_RSS_IPV6_UDP_EX) + +#define ETH_RSS_TCP ( \ + ETH_RSS_NONFRAG_IPV4_TCP | \ + ETH_RSS_NONFRAG_IPV6_TCP | \ + ETH_RSS_IPV6_TCP_EX) + +#define ETH_RSS_SCTP ( \ + ETH_RSS_NONFRAG_IPV4_SCTP | \ + ETH_RSS_NONFRAG_IPV6_SCTP) + +/**< Mask of valid RSS hash protocols */ +#define ETH_RSS_PROTO_MASK ( \ + ETH_RSS_IPV4 | \ + ETH_RSS_FRAG_IPV4 | \ + ETH_RSS_NONFRAG_IPV4_TCP | \ + ETH_RSS_NONFRAG_IPV4_UDP | \ + ETH_RSS_NONFRAG_IPV4_SCTP | \ + ETH_RSS_NONFRAG_IPV4_OTHER | \ + ETH_RSS_IPV6 | \ + ETH_RSS_FRAG_IPV6 | \ + ETH_RSS_NONFRAG_IPV6_TCP | \ + ETH_RSS_NONFRAG_IPV6_UDP | \ + ETH_RSS_NONFRAG_IPV6_SCTP | \ + ETH_RSS_NONFRAG_IPV6_OTHER | \ + ETH_RSS_L2_PAYLOAD | \ + ETH_RSS_IPV6_EX | \ + ETH_RSS_IPV6_TCP_EX | \ + ETH_RSS_IPV6_UDP_EX) + +/* + * Definitions used for redirection table entry size. + * Some RSS RETA sizes may not be supported by some drivers, check the + * documentation or the description of relevant functions for more details. + */ +#define ETH_RSS_RETA_SIZE_64 64 +#define ETH_RSS_RETA_SIZE_128 128 +#define ETH_RSS_RETA_SIZE_512 512 +#define RTE_RETA_GROUP_SIZE 64 + +/* Definitions used for VMDQ and DCB functionality */ +#define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */ +#define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */ +#define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */ +#define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */ + +/* DCB capability defines */ +#define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */ +#define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */ + +/* Definitions used for VLAN Offload functionality */ +#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */ +#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */ +#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */ + +/* Definitions used for mask VLAN setting */ +#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */ +#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/ +#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/ +#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/ + +/* Definitions used for receive MAC address */ +#define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */ + +/* Definitions used for unicast hash */ +#define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */ + +/* Definitions used for VMDQ pool rx mode setting */ +#define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */ +#define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */ +#define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */ +#define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */ +#define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */ + +/** Maximum nb. of vlan per mirror rule */ +#define ETH_MIRROR_MAX_VLANS 64 + +#define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */ +#define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */ +#define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */ +#define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */ +#define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */ + +/** + * A structure used to configure VLAN traffic mirror of an Ethernet port. + */ +struct rte_eth_vlan_mirror { + uint64_t vlan_mask; /**< mask for valid VLAN ID. */ + /** VLAN ID list for vlan mirroring. */ + uint16_t vlan_id[ETH_MIRROR_MAX_VLANS]; +}; + +/** + * A structure used to configure traffic mirror of an Ethernet port. + */ +struct rte_eth_mirror_conf { + uint8_t rule_type; /**< Mirroring rule type */ + uint8_t dst_pool; /**< Destination pool for this mirror rule. */ + uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */ + /** VLAN ID setting for VLAN mirroring. */ + struct rte_eth_vlan_mirror vlan; +}; + +/** + * A structure used to configure 64 entries of Redirection Table of the + * Receive Side Scaling (RSS) feature of an Ethernet port. To configure + * more than 64 entries supported by hardware, an array of this structure + * is needed. + */ +struct rte_eth_rss_reta_entry64 { + uint64_t mask; + /**< Mask bits indicate which entries need to be updated/queried. */ + uint16_t reta[RTE_RETA_GROUP_SIZE]; + /**< Group of 64 redirection table entries. */ +}; + +/** + * This enum indicates the possible number of traffic classes + * in DCB configratioins + */ +enum rte_eth_nb_tcs { + ETH_4_TCS = 4, /**< 4 TCs with DCB. */ + ETH_8_TCS = 8 /**< 8 TCs with DCB. */ +}; + +/** + * This enum indicates the possible number of queue pools + * in VMDQ configurations. + */ +enum rte_eth_nb_pools { + ETH_8_POOLS = 8, /**< 8 VMDq pools. */ + ETH_16_POOLS = 16, /**< 16 VMDq pools. */ + ETH_32_POOLS = 32, /**< 32 VMDq pools. */ + ETH_64_POOLS = 64 /**< 64 VMDq pools. */ +}; + +/* This structure may be extended in future. */ +struct rte_eth_dcb_rx_conf { + enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; +}; + +struct rte_eth_vmdq_dcb_tx_conf { + enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; +}; + +struct rte_eth_dcb_tx_conf { + enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; +}; + +struct rte_eth_vmdq_tx_conf { + enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */ +}; + +/** + * A structure used to configure the VMDQ+DCB feature + * of an Ethernet port. + * + * Using this feature, packets are routed to a pool of queues, based + * on the vlan id in the vlan tag, and then to a specific queue within + * that pool, using the user priority vlan tag field. + * + * A default pool may be used, if desired, to route all traffic which + * does not match the vlan filter rules. + */ +struct rte_eth_vmdq_dcb_conf { + enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */ + uint8_t enable_default_pool; /**< If non-zero, use a default pool */ + uint8_t default_pool; /**< The default pool, if applicable */ + uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */ + struct { + uint16_t vlan_id; /**< The vlan id of the received frame */ + uint64_t pools; /**< Bitmask of pools for packet rx */ + } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; + /**< Selects a queue in a pool */ +}; + +struct rte_eth_vmdq_rx_conf { + enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */ + uint8_t enable_default_pool; /**< If non-zero, use a default pool */ + uint8_t default_pool; /**< The default pool, if applicable */ + uint8_t enable_loop_back; /**< Enable VT loop back */ + uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */ + uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */ + struct { + uint16_t vlan_id; /**< The vlan id of the received frame */ + uint64_t pools; /**< Bitmask of pools for packet rx */ + } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */ +}; + +/** + * A structure used to configure the TX features of an Ethernet port. + */ +struct rte_eth_txmode { + enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */ + + /* For i40e specifically */ + uint16_t pvid; + uint8_t hw_vlan_reject_tagged : 1, + /**< If set, reject sending out tagged pkts */ + hw_vlan_reject_untagged : 1, + /**< If set, reject sending out untagged pkts */ + hw_vlan_insert_pvid : 1; + /**< If set, enable port based VLAN insertion */ +}; + +/** + * A structure used to configure an RX ring of an Ethernet port. + */ +struct rte_eth_rxconf { + struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */ + uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */ + uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */ + uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ +}; + +#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */ +#define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */ +#define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */ +#define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */ +#define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */ +#define ETH_TXQ_FLAGS_NOXSUMUDP 0x0400 /**< disable UDP checksum offload */ +#define ETH_TXQ_FLAGS_NOXSUMTCP 0x0800 /**< disable TCP checksum offload */ +#define ETH_TXQ_FLAGS_NOOFFLOADS \ + (ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \ + ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP) +#define ETH_TXQ_FLAGS_NOXSUMS \ + (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \ + ETH_TXQ_FLAGS_NOXSUMTCP) +/** + * A structure used to configure a TX ring of an Ethernet port. + */ +struct rte_eth_txconf { + struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */ + uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */ + uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are + less free descriptors than this value. */ + + uint32_t txq_flags; /**< Set flags for the Tx queue */ + uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ +}; + +/** + * A structure contains information about HW descriptor ring limitations. + */ +struct rte_eth_desc_lim { + uint16_t nb_max; /**< Max allowed number of descriptors. */ + uint16_t nb_min; /**< Min allowed number of descriptors. */ + uint16_t nb_align; /**< Number of descriptors should be aligned to. */ +}; + +/** + * This enum indicates the flow control mode + */ +enum rte_eth_fc_mode { + RTE_FC_NONE = 0, /**< Disable flow control. */ + RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */ + RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */ + RTE_FC_FULL /**< Enable flow control on both side. */ +}; + +/** + * A structure used to configure Ethernet flow control parameter. + * These parameters will be configured into the register of the NIC. + * Please refer to the corresponding data sheet for proper value. + */ +struct rte_eth_fc_conf { + uint32_t high_water; /**< High threshold value to trigger XOFF */ + uint32_t low_water; /**< Low threshold value to trigger XON */ + uint16_t pause_time; /**< Pause quota in the Pause frame */ + uint16_t send_xon; /**< Is XON frame need be sent */ + enum rte_eth_fc_mode mode; /**< Link flow control mode */ + uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */ + uint8_t autoneg; /**< Use Pause autoneg */ +}; + +/** + * A structure used to configure Ethernet priority flow control parameter. + * These parameters will be configured into the register of the NIC. + * Please refer to the corresponding data sheet for proper value. + */ +struct rte_eth_pfc_conf { + struct rte_eth_fc_conf fc; /**< General flow control parameter. */ + uint8_t priority; /**< VLAN User Priority. */ +}; + +/** + * Memory space that can be configured to store Flow Director filters + * in the board memory. + */ +enum rte_fdir_pballoc_type { + RTE_FDIR_PBALLOC_64K = 0, /**< 64k. */ + RTE_FDIR_PBALLOC_128K, /**< 128k. */ + RTE_FDIR_PBALLOC_256K, /**< 256k. */ +}; + +/** + * Select report mode of FDIR hash information in RX descriptors. + */ +enum rte_fdir_status_mode { + RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */ + RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */ + RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */ +}; + +/** + * A structure used to configure the Flow Director (FDIR) feature + * of an Ethernet port. + * + * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored. + */ +struct rte_fdir_conf { + enum rte_fdir_mode mode; /**< Flow Director mode. */ + enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */ + enum rte_fdir_status_mode status; /**< How to report FDIR hash. */ + /** RX queue of packets matching a "drop" filter in perfect mode. */ + uint8_t drop_queue; + struct rte_eth_fdir_masks mask; + struct rte_eth_fdir_flex_conf flex_conf; + /**< Flex payload configuration. */ +}; + +/** + * UDP tunneling configuration. + * Used to config the UDP port for a type of tunnel. + * NICs need the UDP port to identify the tunnel type. + * Normally a type of tunnel has a default UDP port, this structure can be used + * in case if the users want to change or support more UDP port. + */ +struct rte_eth_udp_tunnel { + uint16_t udp_port; /**< UDP port used for the tunnel. */ + uint8_t prot_type; /**< Tunnel type. Defined in rte_eth_tunnel_type. */ +}; + +/** + * A structure used to enable/disable specific device interrupts. + */ +struct rte_intr_conf { + /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */ + uint16_t lsc; + /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */ + uint16_t rxq; +}; + +/** + * A structure used to configure an Ethernet port. + * Depending upon the RX multi-queue mode, extra advanced + * configuration settings may be needed. + */ +struct rte_eth_conf { + uint32_t link_speeds; /**< bitmap of ETH_LINK_SPEED_XXX of speeds to be + used. ETH_LINK_SPEED_FIXED disables link + autonegotiation, and a unique speed shall be + set. Otherwise, the bitmap defines the set of + speeds to be advertised. If the special value + ETH_LINK_SPEED_AUTONEG (0) is used, all speeds + supported are advertised. */ + struct rte_eth_rxmode rxmode; /**< Port RX configuration. */ + struct rte_eth_txmode txmode; /**< Port TX configuration. */ + uint32_t lpbk_mode; /**< Loopback operation mode. By default the value + is 0, meaning the loopback mode is disabled. + Read the datasheet of given ethernet controller + for details. The possible values of this field + are defined in implementation of each driver. */ + struct { + struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */ + struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf; + /**< Port vmdq+dcb configuration. */ + struct rte_eth_dcb_rx_conf dcb_rx_conf; + /**< Port dcb RX configuration. */ + struct rte_eth_vmdq_rx_conf vmdq_rx_conf; + /**< Port vmdq RX configuration. */ + } rx_adv_conf; /**< Port RX filtering configuration (union). */ + union { + struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf; + /**< Port vmdq+dcb TX configuration. */ + struct rte_eth_dcb_tx_conf dcb_tx_conf; + /**< Port dcb TX configuration. */ + struct rte_eth_vmdq_tx_conf vmdq_tx_conf; + /**< Port vmdq TX configuration. */ + } tx_adv_conf; /**< Port TX DCB configuration (union). */ + /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC + is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */ + uint32_t dcb_capability_en; + struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */ + struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */ +}; + +/** + * A structure used to retrieve the contextual information of + * an Ethernet device, such as the controlling driver of the device, + * its PCI context, etc... + */ + +/** + * RX offload capabilities of a device. + */ +#define DEV_RX_OFFLOAD_VLAN_STRIP 0x00000001 +#define DEV_RX_OFFLOAD_IPV4_CKSUM 0x00000002 +#define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004 +#define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008 +#define DEV_RX_OFFLOAD_TCP_LRO 0x00000010 +#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020 +#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040 + +/** + * TX offload capabilities of a device. + */ +#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001 +#define DEV_TX_OFFLOAD_IPV4_CKSUM 0x00000002 +#define DEV_TX_OFFLOAD_UDP_CKSUM 0x00000004 +#define DEV_TX_OFFLOAD_TCP_CKSUM 0x00000008 +#define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010 +#define DEV_TX_OFFLOAD_TCP_TSO 0x00000020 +#define DEV_TX_OFFLOAD_UDP_TSO 0x00000040 +#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100 + +/** + * Ethernet device information + */ +struct rte_eth_dev_info { + struct rte_pci_device *pci_dev; /**< Device PCI information. */ + const char *driver_name; /**< Device Driver name. */ + unsigned int if_index; /**< Index to bound host interface, or 0 if none. + Use if_indextoname() to translate into an interface name. */ + uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */ + uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */ + uint16_t max_rx_queues; /**< Maximum number of RX queues. */ + uint16_t max_tx_queues; /**< Maximum number of TX queues. */ + uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */ + uint32_t max_hash_mac_addrs; + /** Maximum number of hash MAC addresses for MTA and UTA. */ + uint16_t max_vfs; /**< Maximum number of VFs. */ + uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */ + uint32_t rx_offload_capa; /**< Device RX offload capabilities. */ + uint32_t tx_offload_capa; /**< Device TX offload capabilities. */ + uint16_t reta_size; + /**< Device redirection table size, the total number of entries. */ + uint8_t hash_key_size; /**< Hash key size in bytes */ + /** Bit mask of RSS offloads, the bit offset also means flow type */ + uint64_t flow_type_rss_offloads; + struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */ + struct rte_eth_txconf default_txconf; /**< Default TX configuration */ + uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */ + uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */ + uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */ + struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */ + struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */ + uint32_t speed_capa; /**< Supported speeds bitmap (ETH_LINK_SPEED_). */ +}; + +/** + * Ethernet device RX queue information structure. + * Used to retieve information about configured queue. + */ +struct rte_eth_rxq_info { + struct rte_mempool *mp; /**< mempool used by that queue. */ + struct rte_eth_rxconf conf; /**< queue config parameters. */ + uint8_t scattered_rx; /**< scattered packets RX supported. */ + uint16_t nb_desc; /**< configured number of RXDs. */ +} __rte_cache_min_aligned; + +/** + * Ethernet device TX queue information structure. + * Used to retieve information about configured queue. + */ +struct rte_eth_txq_info { + struct rte_eth_txconf conf; /**< queue config parameters. */ + uint16_t nb_desc; /**< configured number of TXDs. */ +} __rte_cache_min_aligned; + +/** Maximum name length for extended statistics counters */ +#define RTE_ETH_XSTATS_NAME_SIZE 64 + +/** + * An Ethernet device extended statistic structure + * + * This structure is used by ethdev->eth_xstats_get() to provide + * statistics that are not provided in the generic rte_eth_stats + * structure. + */ +struct rte_eth_xstats { + char name[RTE_ETH_XSTATS_NAME_SIZE]; + uint64_t value; +}; + +#define ETH_DCB_NUM_TCS 8 +#define ETH_MAX_VMDQ_POOL 64 + +/** + * A structure used to get the information of queue and + * TC mapping on both TX and RX paths. + */ +struct rte_eth_dcb_tc_queue_mapping { + /** rx queues assigned to tc per Pool */ + struct { + uint8_t base; + uint8_t nb_queue; + } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS]; + /** rx queues assigned to tc per Pool */ + struct { + uint8_t base; + uint8_t nb_queue; + } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS]; +}; + +/** + * A structure used to get the information of DCB. + * It includes TC UP mapping and queue TC mapping. + */ +struct rte_eth_dcb_info { + uint8_t nb_tcs; /**< number of TCs */ + uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */ + uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */ + /** rx queues assigned to tc */ + struct rte_eth_dcb_tc_queue_mapping tc_queue; +}; + +/** + * RX/TX queue states + */ +#define RTE_ETH_QUEUE_STATE_STOPPED 0 +#define RTE_ETH_QUEUE_STATE_STARTED 1 + +struct rte_eth_dev; + +struct rte_eth_dev_callback; +/** @internal Structure to keep track of registered callbacks */ +TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback); + + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG +#define RTE_PMD_DEBUG_TRACE(...) \ + rte_pmd_debug_trace(__func__, __VA_ARGS__) +#else +#define RTE_PMD_DEBUG_TRACE(...) +#endif + + +/* Macros to check for valid port */ +#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \ + if (!rte_eth_dev_is_valid_port(port_id)) { \ + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \ + return retval; \ + } \ +} while (0) + +#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \ + if (!rte_eth_dev_is_valid_port(port_id)) { \ + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \ + return; \ + } \ +} while (0) + +/** + * l2 tunnel configuration. + */ + +/**< l2 tunnel enable mask */ +#define ETH_L2_TUNNEL_ENABLE_MASK 0x00000001 +/**< l2 tunnel insertion mask */ +#define ETH_L2_TUNNEL_INSERTION_MASK 0x00000002 +/**< l2 tunnel stripping mask */ +#define ETH_L2_TUNNEL_STRIPPING_MASK 0x00000004 +/**< l2 tunnel forwarding mask */ +#define ETH_L2_TUNNEL_FORWARDING_MASK 0x00000008 + +/* + * Definitions of all functions exported by an Ethernet driver through the + * the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev* + * structure associated with an Ethernet device. + */ + +typedef int (*eth_dev_configure_t)(struct rte_eth_dev *dev); +/**< @internal Ethernet device configuration. */ + +typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev); +/**< @internal Function used to start a configured Ethernet device. */ + +typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev); +/**< @internal Function used to stop a configured Ethernet device. */ + +typedef int (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev); +/**< @internal Function used to link up a configured Ethernet device. */ + +typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev); +/**< @internal Function used to link down a configured Ethernet device. */ + +typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev); +/**< @internal Function used to close a configured Ethernet device. */ + +typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev); +/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */ + +typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev); +/**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */ + +typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev); +/**< @internal Enable the receipt of all multicast packets by an Ethernet device. */ + +typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev); +/**< @internal Disable the receipt of all multicast packets by an Ethernet device. */ + +typedef int (*eth_link_update_t)(struct rte_eth_dev *dev, + int wait_to_complete); +/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */ + +typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev, + struct rte_eth_stats *igb_stats); +/**< @internal Get global I/O statistics of an Ethernet device. */ + +typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev); +/**< @internal Reset global I/O statistics of an Ethernet device to 0. */ + +typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev, + struct rte_eth_xstats *stats, unsigned n); +/**< @internal Get extended stats of an Ethernet device. */ + +typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev); +/**< @internal Reset extended stats of an Ethernet device. */ + +typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev, + uint16_t queue_id, + uint8_t stat_idx, + uint8_t is_rx); +/**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */ + +typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev, + struct rte_eth_dev_info *dev_info); +/**< @internal Get specific informations of an Ethernet device. */ + +typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev); +/**< @internal Get supported ptypes of an Ethernet device. */ + +typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev, + uint16_t queue_id); +/**< @internal Start rx and tx of a queue of an Ethernet device. */ + +typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev, + uint16_t queue_id); +/**< @internal Stop rx and tx of a queue of an Ethernet device. */ + +typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id, + uint16_t nb_rx_desc, + unsigned int socket_id, + const struct rte_eth_rxconf *rx_conf, + struct rte_mempool *mb_pool); +/**< @internal Set up a receive queue of an Ethernet device. */ + +typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev, + uint16_t tx_queue_id, + uint16_t nb_tx_desc, + unsigned int socket_id, + const struct rte_eth_txconf *tx_conf); +/**< @internal Setup a transmit queue of an Ethernet device. */ + +typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id); +/**< @internal Enable interrupt of a receive queue of an Ethernet device. */ + +typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id); +/**< @internal Disable interrupt of a receive queue of an Ethernet device. */ + +typedef void (*eth_queue_release_t)(void *queue); +/**< @internal Release memory resources allocated by given RX/TX queue. */ + +typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id); +/**< @internal Get number of available descriptors on a receive queue of an Ethernet device. */ + +typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset); +/**< @internal Check DD bit of specific RX descriptor */ + +typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo); + +typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev, + uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo); + +typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu); +/**< @internal Set MTU. */ + +typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev, + uint16_t vlan_id, + int on); +/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */ + +typedef int (*vlan_tpid_set_t)(struct rte_eth_dev *dev, + enum rte_vlan_type type, uint16_t tpid); +/**< @internal set the outer VLAN-TPID by an Ethernet device. */ + +typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask); +/**< @internal set VLAN offload function by an Ethernet device. */ + +typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev, + uint16_t vlan_id, + int on); +/**< @internal set port based TX VLAN insertion by an Ethernet device. */ + +typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev, + uint16_t rx_queue_id, + int on); +/**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */ + +typedef uint16_t (*eth_rx_burst_t)(void *rxq, + struct rte_mbuf **rx_pkts, + uint16_t nb_pkts); +/**< @internal Retrieve input packets from a receive queue of an Ethernet device. */ + +typedef uint16_t (*eth_tx_burst_t)(void *txq, + struct rte_mbuf **tx_pkts, + uint16_t nb_pkts); +/**< @internal Send output packets on a transmit queue of an Ethernet device. */ + +typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev, + struct rte_eth_fc_conf *fc_conf); +/**< @internal Get current flow control parameter on an Ethernet device */ + +typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev, + struct rte_eth_fc_conf *fc_conf); +/**< @internal Setup flow control parameter on an Ethernet device */ + +typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev, + struct rte_eth_pfc_conf *pfc_conf); +/**< @internal Setup priority flow control parameter on an Ethernet device */ + +typedef int (*reta_update_t)(struct rte_eth_dev *dev, + struct rte_eth_rss_reta_entry64 *reta_conf, + uint16_t reta_size); +/**< @internal Update RSS redirection table on an Ethernet device */ + +typedef int (*reta_query_t)(struct rte_eth_dev *dev, + struct rte_eth_rss_reta_entry64 *reta_conf, + uint16_t reta_size); +/**< @internal Query RSS redirection table on an Ethernet device */ + +typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev, + struct rte_eth_rss_conf *rss_conf); +/**< @internal Update RSS hash configuration of an Ethernet device */ + +typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev, + struct rte_eth_rss_conf *rss_conf); +/**< @internal Get current RSS hash configuration of an Ethernet device */ + +typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev); +/**< @internal Turn on SW controllable LED on an Ethernet device */ + +typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev); +/**< @internal Turn off SW controllable LED on an Ethernet device */ + +typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index); +/**< @internal Remove MAC address from receive address register */ + +typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev, + struct ether_addr *mac_addr, + uint32_t index, + uint32_t vmdq); +/**< @internal Set a MAC address into Receive Address Address Register */ + +typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev, + struct ether_addr *mac_addr); +/**< @internal Set a MAC address into Receive Address Address Register */ + +typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev, + struct ether_addr *mac_addr, + uint8_t on); +/**< @internal Set a Unicast Hash bitmap */ + +typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev, + uint8_t on); +/**< @internal Set all Unicast Hash bitmap */ + +typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev, + uint16_t vf, + uint16_t rx_mode, + uint8_t on); +/**< @internal Set a VF receive mode */ + +typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev, + uint16_t vf, + uint8_t on); +/**< @internal Set a VF receive mode */ + +typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev, + uint16_t vf, + uint8_t on); +/**< @internal Enable or disable a VF transmit */ + +typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev, + uint16_t vlan, + uint64_t vf_mask, + uint8_t vlan_on); +/**< @internal Set VF VLAN pool filter */ + +typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev, + uint16_t queue_idx, + uint16_t tx_rate); +/**< @internal Set queue TX rate */ + +typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev, + uint16_t vf, + uint16_t tx_rate, + uint64_t q_msk); +/**< @internal Set VF TX rate */ + +typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev, + struct rte_eth_mirror_conf *mirror_conf, + uint8_t rule_id, + uint8_t on); +/**< @internal Add a traffic mirroring rule on an Ethernet device */ + +typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev, + uint8_t rule_id); +/**< @internal Remove a traffic mirroring rule on an Ethernet device */ + +typedef int (*eth_udp_tunnel_port_add_t)(struct rte_eth_dev *dev, + struct rte_eth_udp_tunnel *tunnel_udp); +/**< @internal Add tunneling UDP port */ + +typedef int (*eth_udp_tunnel_port_del_t)(struct rte_eth_dev *dev, + struct rte_eth_udp_tunnel *tunnel_udp); +/**< @internal Delete tunneling UDP port */ + +typedef int (*eth_set_mc_addr_list_t)(struct rte_eth_dev *dev, + struct ether_addr *mc_addr_set, + uint32_t nb_mc_addr); +/**< @internal set the list of multicast addresses on an Ethernet device */ + +typedef int (*eth_timesync_enable_t)(struct rte_eth_dev *dev); +/**< @internal Function used to enable IEEE1588/802.1AS timestamping. */ + +typedef int (*eth_timesync_disable_t)(struct rte_eth_dev *dev); +/**< @internal Function used to disable IEEE1588/802.1AS timestamping. */ + +typedef int (*eth_timesync_read_rx_timestamp_t)(struct rte_eth_dev *dev, + struct timespec *timestamp, + uint32_t flags); +/**< @internal Function used to read an RX IEEE1588/802.1AS timestamp. */ + +typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev, + struct timespec *timestamp); +/**< @internal Function used to read a TX IEEE1588/802.1AS timestamp. */ + +typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t); +/**< @internal Function used to adjust the device clock */ + +typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev, + struct timespec *timestamp); +/**< @internal Function used to get time from the device clock. */ + +typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev, + const struct timespec *timestamp); +/**< @internal Function used to get time from the device clock */ + +typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev); +/**< @internal Retrieve device register count */ + +typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev, + struct rte_dev_reg_info *info); +/**< @internal Retrieve registers */ + +typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev); +/**< @internal Retrieve eeprom size */ + +typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info); +/**< @internal Retrieve eeprom data */ + +typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info); +/**< @internal Program eeprom data */ + +typedef int (*eth_l2_tunnel_eth_type_conf_t) + (struct rte_eth_dev *dev, struct rte_eth_l2_tunnel_conf *l2_tunnel); +/**< @internal config l2 tunnel ether type */ + +typedef int (*eth_l2_tunnel_offload_set_t) + (struct rte_eth_dev *dev, + struct rte_eth_l2_tunnel_conf *l2_tunnel, + uint32_t mask, + uint8_t en); +/**< @internal enable/disable the l2 tunnel offload functions */ + +#ifdef RTE_NIC_BYPASS + +enum { + RTE_BYPASS_MODE_NONE, + RTE_BYPASS_MODE_NORMAL, + RTE_BYPASS_MODE_BYPASS, + RTE_BYPASS_MODE_ISOLATE, + RTE_BYPASS_MODE_NUM, +}; + +#define RTE_BYPASS_MODE_VALID(x) \ + ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM) + +enum { + RTE_BYPASS_EVENT_NONE, + RTE_BYPASS_EVENT_START, + RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START, + RTE_BYPASS_EVENT_POWER_ON, + RTE_BYPASS_EVENT_OS_OFF, + RTE_BYPASS_EVENT_POWER_OFF, + RTE_BYPASS_EVENT_TIMEOUT, + RTE_BYPASS_EVENT_NUM +}; + +#define RTE_BYPASS_EVENT_VALID(x) \ + ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM) + +enum { + RTE_BYPASS_TMT_OFF, /* timeout disabled. */ + RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ + RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ + RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ + RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ + RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ + RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ + RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ + RTE_BYPASS_TMT_NUM +}; + +#define RTE_BYPASS_TMT_VALID(x) \ + ((x) == RTE_BYPASS_TMT_OFF || \ + ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM)) + +typedef void (*bypass_init_t)(struct rte_eth_dev *dev); +typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state); +typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state); +typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event); +typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event); +typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout); +typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout); +typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver); +typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev); +#endif + +typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev, + enum rte_filter_type filter_type, + enum rte_filter_op filter_op, + void *arg); +/**< @internal Take operations to assigned filter type on an Ethernet device */ + +typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev, + struct rte_eth_dcb_info *dcb_info); +/**< @internal Get dcb information on an Ethernet device */ + +/** + * @internal A structure containing the functions exported by an Ethernet driver. + */ +struct eth_dev_ops { + eth_dev_configure_t dev_configure; /**< Configure device. */ + eth_dev_start_t dev_start; /**< Start device. */ + eth_dev_stop_t dev_stop; /**< Stop device. */ + eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */ + eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */ + eth_dev_close_t dev_close; /**< Close device. */ + eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */ + eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */ + eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */ + eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */ + eth_link_update_t link_update; /**< Get device link state. */ + eth_stats_get_t stats_get; /**< Get generic device statistics. */ + eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */ + eth_xstats_get_t xstats_get; /**< Get extended device statistics. */ + eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */ + eth_queue_stats_mapping_set_t queue_stats_mapping_set; + /**< Configure per queue stat counter mapping. */ + eth_dev_infos_get_t dev_infos_get; /**< Get device info. */ + eth_dev_supported_ptypes_get_t dev_supported_ptypes_get; + /**< Get packet types supported and identified by device*/ + mtu_set_t mtu_set; /**< Set MTU. */ + vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */ + vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */ + vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */ + vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */ + vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */ + eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/ + eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/ + eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/ + eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/ + eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/ + eth_queue_release_t rx_queue_release;/**< Release RX queue.*/ + eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */ + eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */ + /**< Enable Rx queue interrupt. */ + eth_rx_enable_intr_t rx_queue_intr_enable; + /**< Disable Rx queue interrupt.*/ + eth_rx_disable_intr_t rx_queue_intr_disable; + eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/ + eth_queue_release_t tx_queue_release;/**< Release TX queue.*/ + eth_dev_led_on_t dev_led_on; /**< Turn on LED. */ + eth_dev_led_off_t dev_led_off; /**< Turn off LED. */ + flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */ + flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */ + priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/ + eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */ + eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */ + eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */ + eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */ + eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */ + eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/ + eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/ + eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */ + eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */ + eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */ + eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */ + /** Add UDP tunnel port. */ + eth_udp_tunnel_port_add_t udp_tunnel_port_add; + /** Del UDP tunnel port. */ + eth_udp_tunnel_port_del_t udp_tunnel_port_del; + eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */ + eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */ + /** Update redirection table. */ + reta_update_t reta_update; + /** Query redirection table. */ + reta_query_t reta_query; + + eth_get_reg_length_t get_reg_length; + /**< Get # of registers */ + eth_get_reg_t get_reg; + /**< Get registers */ + eth_get_eeprom_length_t get_eeprom_length; + /**< Get eeprom length */ + eth_get_eeprom_t get_eeprom; + /**< Get eeprom data */ + eth_set_eeprom_t set_eeprom; + /**< Set eeprom */ + /* bypass control */ +#ifdef RTE_NIC_BYPASS + bypass_init_t bypass_init; + bypass_state_set_t bypass_state_set; + bypass_state_show_t bypass_state_show; + bypass_event_set_t bypass_event_set; + bypass_event_show_t bypass_event_show; + bypass_wd_timeout_set_t bypass_wd_timeout_set; + bypass_wd_timeout_show_t bypass_wd_timeout_show; + bypass_ver_show_t bypass_ver_show; + bypass_wd_reset_t bypass_wd_reset; +#endif + + /** Configure RSS hash protocols. */ + rss_hash_update_t rss_hash_update; + /** Get current RSS hash configuration. */ + rss_hash_conf_get_t rss_hash_conf_get; + eth_filter_ctrl_t filter_ctrl; + /**< common filter control. */ + eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */ + eth_rxq_info_get_t rxq_info_get; + /**< retrieve RX queue information. */ + eth_txq_info_get_t txq_info_get; + /**< retrieve TX queue information. */ + /** Turn IEEE1588/802.1AS timestamping on. */ + eth_timesync_enable_t timesync_enable; + /** Turn IEEE1588/802.1AS timestamping off. */ + eth_timesync_disable_t timesync_disable; + /** Read the IEEE1588/802.1AS RX timestamp. */ + eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp; + /** Read the IEEE1588/802.1AS TX timestamp. */ + eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp; + + /** Get DCB information */ + eth_get_dcb_info get_dcb_info; + /** Adjust the device clock.*/ + eth_timesync_adjust_time timesync_adjust_time; + /** Get the device clock time. */ + eth_timesync_read_time timesync_read_time; + /** Set the device clock time. */ + eth_timesync_write_time timesync_write_time; + /** Config ether type of l2 tunnel */ + eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf; + /** Enable/disable l2 tunnel offload functions */ + eth_l2_tunnel_offload_set_t l2_tunnel_offload_set; +}; + +/** + * Function type used for RX packet processing packet callbacks. + * + * The callback function is called on RX with a burst of packets that have + * been received on the given port and queue. + * + * @param port + * The Ethernet port on which RX is being performed. + * @param queue + * The queue on the Ethernet port which is being used to receive the packets. + * @param pkts + * The burst of packets that have just been received. + * @param nb_pkts + * The number of packets in the burst pointed to by "pkts". + * @param max_pkts + * The max number of packets that can be stored in the "pkts" array. + * @param user_param + * The arbitrary user parameter passed in by the application when the callback + * was originally configured. + * @return + * The number of packets returned to the user. + */ +typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue, + struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts, + void *user_param); + +/** + * Function type used for TX packet processing packet callbacks. + * + * The callback function is called on TX with a burst of packets immediately + * before the packets are put onto the hardware queue for transmission. + * + * @param port + * The Ethernet port on which TX is being performed. + * @param queue + * The queue on the Ethernet port which is being used to transmit the packets. + * @param pkts + * The burst of packets that are about to be transmitted. + * @param nb_pkts + * The number of packets in the burst pointed to by "pkts". + * @param user_param + * The arbitrary user parameter passed in by the application when the callback + * was originally configured. + * @return + * The number of packets to be written to the NIC. + */ +typedef uint16_t (*rte_tx_callback_fn)(uint8_t port, uint16_t queue, + struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param); + +/** + * @internal + * Structure used to hold information about the callbacks to be called for a + * queue on RX and TX. + */ +struct rte_eth_rxtx_callback { + struct rte_eth_rxtx_callback *next; + union{ + rte_rx_callback_fn rx; + rte_tx_callback_fn tx; + } fn; + void *param; +}; + +/** + * The eth device type. + */ +enum rte_eth_dev_type { + RTE_ETH_DEV_UNKNOWN, /**< unknown device type */ + RTE_ETH_DEV_PCI, + /**< Physical function and Virtual function of PCI devices */ + RTE_ETH_DEV_VIRTUAL, /**< non hardware device */ + RTE_ETH_DEV_MAX /**< max value of this enum */ +}; + +/** + * @internal + * The generic data structure associated with each ethernet device. + * + * Pointers to burst-oriented packet receive and transmit functions are + * located at the beginning of the structure, along with the pointer to + * where all the data elements for the particular device are stored in shared + * memory. This split allows the function pointer and driver data to be per- + * process, while the actual configuration data for the device is shared. + */ +struct rte_eth_dev { + eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */ + eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */ + struct rte_eth_dev_data *data; /**< Pointer to device data */ + const struct eth_driver *driver;/**< Driver for this device */ + const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */ + struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */ + /** User application callbacks for NIC interrupts */ + struct rte_eth_dev_cb_list link_intr_cbs; + /** + * User-supplied functions called from rx_burst to post-process + * received packets before passing them to the user + */ + struct rte_eth_rxtx_callback *post_rx_burst_cbs[RTE_MAX_QUEUES_PER_PORT]; + /** + * User-supplied functions called from tx_burst to pre-process + * received packets before passing them to the driver for transmission. + */ + struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT]; + uint8_t attached; /**< Flag indicating the port is attached */ + enum rte_eth_dev_type dev_type; /**< Flag indicating the device type */ +}; + +struct rte_eth_dev_sriov { + uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */ + uint8_t nb_q_per_pool; /**< rx queue number per pool */ + uint16_t def_vmdq_idx; /**< Default pool num used for PF */ + uint16_t def_pool_q_idx; /**< Default pool queue start reg index */ +}; +#define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov) + +#define RTE_ETH_NAME_MAX_LEN (32) + +/** + * @internal + * The data part, with no function pointers, associated with each ethernet device. + * + * This structure is safe to place in shared memory to be common among different + * processes in a multi-process configuration. + */ +struct rte_eth_dev_data { + char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */ + + void **rx_queues; /**< Array of pointers to RX queues. */ + void **tx_queues; /**< Array of pointers to TX queues. */ + uint16_t nb_rx_queues; /**< Number of RX queues. */ + uint16_t nb_tx_queues; /**< Number of TX queues. */ + + struct rte_eth_dev_sriov sriov; /**< SRIOV data */ + + void *dev_private; /**< PMD-specific private data */ + + struct rte_eth_link dev_link; + /**< Link-level information & status */ + + struct rte_eth_conf dev_conf; /**< Configuration applied to device. */ + uint16_t mtu; /**< Maximum Transmission Unit. */ + + uint32_t min_rx_buf_size; + /**< Common rx buffer size handled by all queues */ + + uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */ + struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */ + uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR]; + /** bitmap array of associating Ethernet MAC addresses to pools */ + struct ether_addr* hash_mac_addrs; + /** Device Ethernet MAC addresses of hash filtering. */ + uint8_t port_id; /**< Device [external] port identifier. */ + uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */ + scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */ + all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */ + dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0). */ + lro : 1; /**< RX LRO is ON(1) / OFF(0) */ + uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT]; + /** Queues state: STARTED(1) / STOPPED(0) */ + uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT]; + /** Queues state: STARTED(1) / STOPPED(0) */ + uint32_t dev_flags; /**< Capabilities */ + enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */ + int numa_node; /**< NUMA node connection */ + const char *drv_name; /**< Driver name */ +}; + +/** Device supports hotplug detach */ +#define RTE_ETH_DEV_DETACHABLE 0x0001 +/** Device supports link state interrupt */ +#define RTE_ETH_DEV_INTR_LSC 0x0002 +/** Device is a bonded slave */ +#define RTE_ETH_DEV_BONDED_SLAVE 0x0004 + +/** + * @internal + * The pool of *rte_eth_dev* structures. The size of the pool + * is configured at compile-time in the file. + */ +extern struct rte_eth_dev rte_eth_devices[]; + +/** + * Get the total number of Ethernet devices that have been successfully + * initialized by the [matching] Ethernet driver during the PCI probing phase. + * All devices whose port identifier is in the range + * [0, rte_eth_dev_count() - 1] can be operated on by network applications + * immediately after invoking rte_eal_init(). + * If the application unplugs a port using hotplug function, The enabled port + * numbers may be noncontiguous. In the case, the applications need to manage + * enabled port by themselves. + * + * @return + * - The total number of usable Ethernet devices. + */ +uint8_t rte_eth_dev_count(void); + +/** + * @internal + * Returns a ethdev slot specified by the unique identifier name. + * + * @param name + * The pointer to the Unique identifier name for each Ethernet device + * @return + * - The pointer to the ethdev slot, on success. NULL on error + */ +struct rte_eth_dev *rte_eth_dev_allocated(const char *name); + +/** + * @internal + * Allocates a new ethdev slot for an ethernet device and returns the pointer + * to that slot for the driver to use. + * + * @param name Unique identifier name for each Ethernet device + * @param type Device type of this Ethernet device + * @return + * - Slot in the rte_dev_devices array for a new device; + */ +struct rte_eth_dev *rte_eth_dev_allocate(const char *name, + enum rte_eth_dev_type type); + +/** + * @internal + * Release the specified ethdev port. + * + * @param eth_dev + * The *eth_dev* pointer is the address of the *rte_eth_dev* structure. + * @return + * - 0 on success, negative on error + */ +int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev); + +/** + * Attach a new Ethernet device specified by aruguments. + * + * @param devargs + * A pointer to a strings array describing the new device + * to be attached. The strings should be a pci address like + * '0000:01:00.0' or virtual device name like 'eth_pcap0'. + * @param port_id + * A pointer to a port identifier actually attached. + * @return + * 0 on success and port_id is filled, negative on error + */ +int rte_eth_dev_attach(const char *devargs, uint8_t *port_id); + +/** + * Detach a Ethernet device specified by port identifier. + * This function must be called when the device is in the + * closed state. + * + * @param port_id + * The port identifier of the device to detach. + * @param devname + * A pointer to a device name actually detached. + * @return + * 0 on success and devname is filled, negative on error + */ +int rte_eth_dev_detach(uint8_t port_id, char *devname); + +struct eth_driver; +/** + * @internal + * Initialization function of an Ethernet driver invoked for each matching + * Ethernet PCI device detected during the PCI probing phase. + * + * @param eth_dev + * The *eth_dev* pointer is the address of the *rte_eth_dev* structure + * associated with the matching device and which have been [automatically] + * allocated in the *rte_eth_devices* array. + * The *eth_dev* structure is supplied to the driver initialization function + * with the following fields already initialized: + * + * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which + * contains the generic PCI information of the matching device. + * + * - *driver*: Holds the pointer to the *eth_driver* structure. + * + * - *dev_private*: Holds a pointer to the device private data structure. + * + * - *mtu*: Contains the default Ethernet maximum frame length (1500). + * + * - *port_id*: Contains the port index of the device (actually the index + * of the *eth_dev* structure in the *rte_eth_devices* array). + * + * @return + * - 0: Success, the device is properly initialized by the driver. + * In particular, the driver MUST have set up the *dev_ops* pointer + * of the *eth_dev* structure. + * - <0: Error code of the device initialization failure. + */ +typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev); + +/** + * @internal + * Finalization function of an Ethernet driver invoked for each matching + * Ethernet PCI device detected during the PCI closing phase. + * + * @param eth_dev + * The *eth_dev* pointer is the address of the *rte_eth_dev* structure + * associated with the matching device and which have been [automatically] + * allocated in the *rte_eth_devices* array. + * @return + * - 0: Success, the device is properly finalized by the driver. + * In particular, the driver MUST free the *dev_ops* pointer + * of the *eth_dev* structure. + * - <0: Error code of the device initialization failure. + */ +typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev); + +/** + * @internal + * The structure associated with a PMD Ethernet driver. + * + * Each Ethernet driver acts as a PCI driver and is represented by a generic + * *eth_driver* structure that holds: + * + * - An *rte_pci_driver* structure (which must be the first field). + * + * - The *eth_dev_init* function invoked for each matching PCI device. + * + * - The *eth_dev_uninit* function invoked for each matching PCI device. + * + * - The size of the private data to allocate for each matching device. + */ +struct eth_driver { + struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */ + eth_dev_init_t eth_dev_init; /**< Device init function. */ + eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */ + unsigned int dev_private_size; /**< Size of device private data. */ +}; + +/** + * @internal + * A function invoked by the initialization function of an Ethernet driver + * to simultaneously register itself as a PCI driver and as an Ethernet + * Poll Mode Driver (PMD). + * + * @param eth_drv + * The pointer to the *eth_driver* structure associated with + * the Ethernet driver. + */ +void rte_eth_driver_register(struct eth_driver *eth_drv); + +/** + * Convert a numerical speed in Mbps to a bitmap flag that can be used in + * the bitmap link_speeds of the struct rte_eth_conf + * + * @param speed + * Numerical speed value in Mbps + * @param duplex + * ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds) + * @return + * 0 if the speed cannot be mapped + */ +uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex); + +/** + * Configure an Ethernet device. + * This function must be invoked first before any other function in the + * Ethernet API. This function can also be re-invoked when a device is in the + * stopped state. + * + * @param port_id + * The port identifier of the Ethernet device to configure. + * @param nb_rx_queue + * The number of receive queues to set up for the Ethernet device. + * @param nb_tx_queue + * The number of transmit queues to set up for the Ethernet device. + * @param eth_conf + * The pointer to the configuration data to be used for the Ethernet device. + * The *rte_eth_conf* structure includes: + * - the hardware offload features to activate, with dedicated fields for + * each statically configurable offload hardware feature provided by + * Ethernet devices, such as IP checksum or VLAN tag stripping for + * example. + * - the Receive Side Scaling (RSS) configuration when using multiple RX + * queues per port. + * + * Embedding all configuration information in a single data structure + * is the more flexible method that allows the addition of new features + * without changing the syntax of the API. + * @return + * - 0: Success, device configured. + * - <0: Error code returned by the driver configuration function. + */ +int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue, + uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf); + +/** + * Allocate and set up a receive queue for an Ethernet device. + * + * The function allocates a contiguous block of memory for *nb_rx_desc* + * receive descriptors from a memory zone associated with *socket_id* + * and initializes each receive descriptor with a network buffer allocated + * from the memory pool *mb_pool*. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rx_queue_id + * The index of the receive queue to set up. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param nb_rx_desc + * The number of receive descriptors to allocate for the receive ring. + * @param socket_id + * The *socket_id* argument is the socket identifier in case of NUMA. + * The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for + * the DMA memory allocated for the receive descriptors of the ring. + * @param rx_conf + * The pointer to the configuration data to be used for the receive queue. + * NULL value is allowed, in which case default RX configuration + * will be used. + * The *rx_conf* structure contains an *rx_thresh* structure with the values + * of the Prefetch, Host, and Write-Back threshold registers of the receive + * ring. + * @param mb_pool + * The pointer to the memory pool from which to allocate *rte_mbuf* network + * memory buffers to populate each descriptor of the receive ring. + * @return + * - 0: Success, receive queue correctly set up. + * - -EINVAL: The size of network buffers which can be allocated from the + * memory pool does not fit the various buffer sizes allowed by the + * device controller. + * - -ENOMEM: Unable to allocate the receive ring descriptors or to + * allocate network memory buffers from the memory pool when + * initializing receive descriptors. + */ +int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id, + uint16_t nb_rx_desc, unsigned int socket_id, + const struct rte_eth_rxconf *rx_conf, + struct rte_mempool *mb_pool); + +/** + * Allocate and set up a transmit queue for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param tx_queue_id + * The index of the transmit queue to set up. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param nb_tx_desc + * The number of transmit descriptors to allocate for the transmit ring. + * @param socket_id + * The *socket_id* argument is the socket identifier in case of NUMA. + * Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for + * the DMA memory allocated for the transmit descriptors of the ring. + * @param tx_conf + * The pointer to the configuration data to be used for the transmit queue. + * NULL value is allowed, in which case default RX configuration + * will be used. + * The *tx_conf* structure contains the following data: + * - The *tx_thresh* structure with the values of the Prefetch, Host, and + * Write-Back threshold registers of the transmit ring. + * When setting Write-Back threshold to the value greater then zero, + * *tx_rs_thresh* value should be explicitly set to one. + * - The *tx_free_thresh* value indicates the [minimum] number of network + * buffers that must be pending in the transmit ring to trigger their + * [implicit] freeing by the driver transmit function. + * - The *tx_rs_thresh* value indicates the [minimum] number of transmit + * descriptors that must be pending in the transmit ring before setting the + * RS bit on a descriptor by the driver transmit function. + * The *tx_rs_thresh* value should be less or equal then + * *tx_free_thresh* value, and both of them should be less then + * *nb_tx_desc* - 3. + * - The *txq_flags* member contains flags to pass to the TX queue setup + * function to configure the behavior of the TX queue. This should be set + * to 0 if no special configuration is required. + * + * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces + * the transmit function to use default values. + * @return + * - 0: Success, the transmit queue is correctly set up. + * - -ENOMEM: Unable to allocate the transmit ring descriptors. + */ +int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id, + uint16_t nb_tx_desc, unsigned int socket_id, + const struct rte_eth_txconf *tx_conf); + +/* + * Return the NUMA socket to which an Ethernet device is connected + * + * @param port_id + * The port identifier of the Ethernet device + * @return + * The NUMA socket id to which the Ethernet device is connected or + * a default of zero if the socket could not be determined. + * -1 is returned is the port_id value is out of range. + */ +int rte_eth_dev_socket_id(uint8_t port_id); + +/* + * Check if port_id of device is attached + * + * @param port_id + * The port identifier of the Ethernet device + * @return + * - 0 if port is out of range or not attached + * - 1 if device is attached + */ +int rte_eth_dev_is_valid_port(uint8_t port_id); + +/* + * Allocate mbuf from mempool, setup the DMA physical address + * and then start RX for specified queue of a port. It is used + * when rx_deferred_start flag of the specified queue is true. + * + * @param port_id + * The port identifier of the Ethernet device + * @param rx_queue_id + * The index of the rx queue to update the ring. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - 0: Success, the transmit queue is correctly set up. + * - -EINVAL: The port_id or the queue_id out of range. + * - -ENOTSUP: The function not supported in PMD driver. + */ +int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id); + +/* + * Stop specified RX queue of a port + * + * @param port_id + * The port identifier of the Ethernet device + * @param rx_queue_id + * The index of the rx queue to update the ring. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - 0: Success, the transmit queue is correctly set up. + * - -EINVAL: The port_id or the queue_id out of range. + * - -ENOTSUP: The function not supported in PMD driver. + */ +int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id); + +/* + * Start TX for specified queue of a port. It is used when tx_deferred_start + * flag of the specified queue is true. + * + * @param port_id + * The port identifier of the Ethernet device + * @param tx_queue_id + * The index of the tx queue to update the ring. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - 0: Success, the transmit queue is correctly set up. + * - -EINVAL: The port_id or the queue_id out of range. + * - -ENOTSUP: The function not supported in PMD driver. + */ +int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id); + +/* + * Stop specified TX queue of a port + * + * @param port_id + * The port identifier of the Ethernet device + * @param tx_queue_id + * The index of the tx queue to update the ring. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - 0: Success, the transmit queue is correctly set up. + * - -EINVAL: The port_id or the queue_id out of range. + * - -ENOTSUP: The function not supported in PMD driver. + */ +int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id); + + + +/** + * Start an Ethernet device. + * + * The device start step is the last one and consists of setting the configured + * offload features and in starting the transmit and the receive units of the + * device. + * On success, all basic functions exported by the Ethernet API (link status, + * receive/transmit, and so on) can be invoked. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - 0: Success, Ethernet device started. + * - <0: Error code of the driver device start function. + */ +int rte_eth_dev_start(uint8_t port_id); + +/** + * Stop an Ethernet device. The device can be restarted with a call to + * rte_eth_dev_start() + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_dev_stop(uint8_t port_id); + + +/** + * Link up an Ethernet device. + * + * Set device link up will re-enable the device rx/tx + * functionality after it is previously set device linked down. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - 0: Success, Ethernet device linked up. + * - <0: Error code of the driver device link up function. + */ +int rte_eth_dev_set_link_up(uint8_t port_id); + +/** + * Link down an Ethernet device. + * The device rx/tx functionality will be disabled if success, + * and it can be re-enabled with a call to + * rte_eth_dev_set_link_up() + * + * @param port_id + * The port identifier of the Ethernet device. + */ +int rte_eth_dev_set_link_down(uint8_t port_id); + +/** + * Close a stopped Ethernet device. The device cannot be restarted! + * The function frees all resources except for needed by the + * closed state. To free these resources, call rte_eth_dev_detach(). + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_dev_close(uint8_t port_id); + +/** + * Enable receipt in promiscuous mode for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_promiscuous_enable(uint8_t port_id); + +/** + * Disable receipt in promiscuous mode for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_promiscuous_disable(uint8_t port_id); + +/** + * Return the value of promiscuous mode for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (1) if promiscuous is enabled + * - (0) if promiscuous is disabled. + * - (-1) on error + */ +int rte_eth_promiscuous_get(uint8_t port_id); + +/** + * Enable the receipt of any multicast frame by an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_allmulticast_enable(uint8_t port_id); + +/** + * Disable the receipt of all multicast frames by an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_allmulticast_disable(uint8_t port_id); + +/** + * Return the value of allmulticast mode for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (1) if allmulticast is enabled + * - (0) if allmulticast is disabled. + * - (-1) on error + */ +int rte_eth_allmulticast_get(uint8_t port_id); + +/** + * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX + * or FULL-DUPLEX) of the physical link of an Ethernet device. It might need + * to wait up to 9 seconds in it. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param link + * A pointer to an *rte_eth_link* structure to be filled with + * the status, the speed and the mode of the Ethernet device link. + */ +void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link); + +/** + * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX + * or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait + * version of rte_eth_link_get(). + * + * @param port_id + * The port identifier of the Ethernet device. + * @param link + * A pointer to an *rte_eth_link* structure to be filled with + * the status, the speed and the mode of the Ethernet device link. + */ +void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link); + +/** + * Retrieve the general I/O statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param stats + * A pointer to a structure of type *rte_eth_stats* to be filled with + * the values of device counters for the following set of statistics: + * - *ipackets* with the total of successfully received packets. + * - *opackets* with the total of successfully transmitted packets. + * - *ibytes* with the total of successfully received bytes. + * - *obytes* with the total of successfully transmitted bytes. + * - *ierrors* with the total of erroneous received packets. + * - *oerrors* with the total of failed transmitted packets. + * @return + * Zero if successful. Non-zero otherwise. + */ +int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats); + +/** + * Reset the general I/O statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_stats_reset(uint8_t port_id); + +/** + * Retrieve extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param xstats + * A pointer to a table of structure of type *rte_eth_xstats* + * to be filled with device statistics names and values. + * This parameter can be set to NULL if n is 0. + * @param n + * The size of the stats table, which should be large enough to store + * all the statistics of the device. + * @return + * - positive value lower or equal to n: success. The return value + * is the number of entries filled in the stats table. + * - positive value higher than n: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - negative value on error (invalid port id) + */ +int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats, + unsigned n); + +/** + * Reset extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_xstats_reset(uint8_t port_id); + +/** + * Set a mapping for the specified transmit queue to the specified per-queue + * statistics counter. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param tx_queue_id + * The index of the transmit queue for which a queue stats mapping is required. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param stat_idx + * The per-queue packet statistics functionality number that the transmit + * queue is to be assigned. + * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1]. + * @return + * Zero if successful. Non-zero otherwise. + */ +int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id, + uint16_t tx_queue_id, uint8_t stat_idx); + +/** + * Set a mapping for the specified receive queue to the specified per-queue + * statistics counter. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rx_queue_id + * The index of the receive queue for which a queue stats mapping is required. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param stat_idx + * The per-queue packet statistics functionality number that the receive + * queue is to be assigned. + * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1]. + * @return + * Zero if successful. Non-zero otherwise. + */ +int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id, + uint16_t rx_queue_id, + uint8_t stat_idx); + +/** + * Retrieve the Ethernet address of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mac_addr + * A pointer to a structure of type *ether_addr* to be filled with + * the Ethernet address of the Ethernet device. + */ +void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr); + +/** + * Retrieve the contextual information of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param dev_info + * A pointer to a structure of type *rte_eth_dev_info* to be filled with + * the contextual information of the Ethernet device. + */ +void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info); + +/** + * Retrieve the supported packet types of an Ethernet device. + * + * @note + * Better to invoke this API after the device is already started or rx burst + * function is decided, to obtain correct supported ptypes. + * @note + * if a given PMD does not report what ptypes it supports, then the supported + * ptype count is reported as 0. + * @param port_id + * The port identifier of the Ethernet device. + * @param ptype_mask + * A hint of what kind of packet type which the caller is interested in. + * @param ptypes + * An array pointer to store adequent packet types, allocated by caller. + * @param num + * Size of the array pointed by param ptypes. + * @return + * - (>=0) Number of supported ptypes. If the number of types exceeds num, + * only num entries will be filled into the ptypes array, but the full + * count of supported ptypes will be returned. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask, + uint32_t *ptypes, int num); + +/** + * Retrieve the MTU of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mtu + * A pointer to a uint16_t where the retrieved MTU is to be stored. + * @return + * - (0) if successful. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu); + +/** + * Change the MTU of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mtu + * A uint16_t for the MTU to be applied. + * @return + * - (0) if successful. + * - (-ENOTSUP) if operation is not supported. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if *mtu* invalid. + */ +int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu); + +/** + * Enable/Disable hardware filtering by an Ethernet device of received + * VLAN packets tagged with a given VLAN Tag Identifier. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param vlan_id + * The VLAN Tag Identifier whose filtering must be enabled or disabled. + * @param on + * If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*. + * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*. + * @return + * - (0) if successful. + * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. + * - (-ENODEV) if *port_id* invalid. + * - (-ENOSYS) if VLAN filtering on *port_id* disabled. + * - (-EINVAL) if *vlan_id* > 4095. + */ +int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on); + +/** + * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device. + * 82599/X540/X550 can support VLAN stripping at the rx queue level + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rx_queue_id + * The index of the receive queue for which a queue stats mapping is required. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param on + * If 1, Enable VLAN Stripping of the receive queue of the Ethernet port. + * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port. + * @return + * - (0) if successful. + * - (-ENOSUP) if hardware-assisted VLAN stripping not configured. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if *rx_queue_id* invalid. + */ +int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id, + int on); + +/** + * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to + * the VLAN Header. This is a register setup available on some Intel NIC, not + * but all, please check the data sheet for availability. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param vlan_type + * The vlan type. + * @param tag_type + * The Tag Protocol ID + * @return + * - (0) if successful. + * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, + enum rte_vlan_type vlan_type, + uint16_t tag_type); + +/** + * Set VLAN offload configuration on an Ethernet device + * Enable/Disable Extended VLAN by an Ethernet device, This is a register setup + * available on some Intel NIC, not but all, please check the data sheet for + * availability. + * Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here + * the configuration is applied on the port level. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param offload_mask + * The VLAN Offload bit mask can be mixed use with "OR" + * ETH_VLAN_STRIP_OFFLOAD + * ETH_VLAN_FILTER_OFFLOAD + * ETH_VLAN_EXTEND_OFFLOAD + * @return + * - (0) if successful. + * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask); + +/** + * Read VLAN Offload configuration from an Ethernet device + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>0) if successful. Bit mask to indicate + * ETH_VLAN_STRIP_OFFLOAD + * ETH_VLAN_FILTER_OFFLOAD + * ETH_VLAN_EXTEND_OFFLOAD + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_get_vlan_offload(uint8_t port_id); + +/** + * Set port based TX VLAN insersion on or off. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param pvid + * Port based TX VLAN identifier togeth with user priority. + * @param on + * Turn on or off the port based TX VLAN insertion. + * + * @return + * - (0) if successful. + * - negative if failed. + */ +int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on); + +/** + * + * Retrieve a burst of input packets from a receive queue of an Ethernet + * device. The retrieved packets are stored in *rte_mbuf* structures whose + * pointers are supplied in the *rx_pkts* array. + * + * The rte_eth_rx_burst() function loops, parsing the RX ring of the + * receive queue, up to *nb_pkts* packets, and for each completed RX + * descriptor in the ring, it performs the following operations: + * + * - Initialize the *rte_mbuf* data structure associated with the + * RX descriptor according to the information provided by the NIC into + * that RX descriptor. + * + * - Store the *rte_mbuf* data structure into the next entry of the + * *rx_pkts* array. + * + * - Replenish the RX descriptor with a new *rte_mbuf* buffer + * allocated from the memory pool associated with the receive queue at + * initialization time. + * + * When retrieving an input packet that was scattered by the controller + * into multiple receive descriptors, the rte_eth_rx_burst() function + * appends the associated *rte_mbuf* buffers to the first buffer of the + * packet. + * + * The rte_eth_rx_burst() function returns the number of packets + * actually retrieved, which is the number of *rte_mbuf* data structures + * effectively supplied into the *rx_pkts* array. + * A return value equal to *nb_pkts* indicates that the RX queue contained + * at least *rx_pkts* packets, and this is likely to signify that other + * received packets remain in the input queue. Applications implementing + * a "retrieve as much received packets as possible" policy can check this + * specific case and keep invoking the rte_eth_rx_burst() function until + * a value less than *nb_pkts* is returned. + * + * This receive method has the following advantages: + * + * - It allows a run-to-completion network stack engine to retrieve and + * to immediately process received packets in a fast burst-oriented + * approach, avoiding the overhead of unnecessary intermediate packet + * queue/dequeue operations. + * + * - Conversely, it also allows an asynchronous-oriented processing + * method to retrieve bursts of received packets and to immediately + * queue them for further parallel processing by another logical core, + * for instance. However, instead of having received packets being + * individually queued by the driver, this approach allows the invoker + * of the rte_eth_rx_burst() function to queue a burst of retrieved + * packets at a time and therefore dramatically reduce the cost of + * enqueue/dequeue operations per packet. + * + * - It allows the rte_eth_rx_burst() function of the driver to take + * advantage of burst-oriented hardware features (CPU cache, + * prefetch instructions, and so on) to minimize the number of CPU + * cycles per packet. + * + * To summarize, the proposed receive API enables many + * burst-oriented optimizations in both synchronous and asynchronous + * packet processing environments with no overhead in both cases. + * + * The rte_eth_rx_burst() function does not provide any error + * notification to avoid the corresponding overhead. As a hint, the + * upper-level application might check the status of the device link once + * being systematically returned a 0 value for a given number of tries. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param rx_pkts + * The address of an array of pointers to *rte_mbuf* structures that + * must be large enough to store *nb_pkts* pointers in it. + * @param nb_pkts + * The maximum number of packets to retrieve. + * @return + * The number of packets actually retrieved, which is the number + * of pointers to *rte_mbuf* structures effectively supplied to the + * *rx_pkts* array. + */ +static inline uint16_t +rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id, + struct rte_mbuf **rx_pkts, const uint16_t nb_pkts) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); + RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0); + + if (queue_id >= dev->data->nb_rx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id); + return 0; + } +#endif + int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], + rx_pkts, nb_pkts); + +#ifdef RTE_ETHDEV_RXTX_CALLBACKS + struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id]; + + if (unlikely(cb != NULL)) { + do { + nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx, + nb_pkts, cb->param); + cb = cb->next; + } while (cb != NULL); + } +#endif + + return nb_rx; +} + +/** + * Get the number of used descriptors in a specific queue + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue id on the specific port. + * @return + * The number of used descriptors in the specific queue, or: + * (-EINVAL) if *port_id* is invalid + * (-ENOTSUP) if the device does not support this function + */ +static inline int +rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL); + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP); + return (*dev->dev_ops->rx_queue_count)(dev, queue_id); +} + +/** + * Check if the DD bit of the specific RX descriptor in the queue has been set + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue id on the specific port. + * @param offset + * The offset of the descriptor ID from tail. + * @return + * - (1) if the specific DD bit is set. + * - (0) if the specific DD bit is not set. + * - (-ENODEV) if *port_id* invalid. + * - (-ENOTSUP) if the device does not support this function + */ +static inline int +rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP); + return (*dev->dev_ops->rx_descriptor_done)( \ + dev->data->rx_queues[queue_id], offset); +} + +/** + * Send a burst of output packets on a transmit queue of an Ethernet device. + * + * The rte_eth_tx_burst() function is invoked to transmit output packets + * on the output queue *queue_id* of the Ethernet device designated by its + * *port_id*. + * The *nb_pkts* parameter is the number of packets to send which are + * supplied in the *tx_pkts* array of *rte_mbuf* structures. + * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets, + * up to the number of transmit descriptors available in the TX ring of the + * transmit queue. + * For each packet to send, the rte_eth_tx_burst() function performs + * the following operations: + * + * - Pick up the next available descriptor in the transmit ring. + * + * - Free the network buffer previously sent with that descriptor, if any. + * + * - Initialize the transmit descriptor with the information provided + * in the *rte_mbuf data structure. + * + * In the case of a segmented packet composed of a list of *rte_mbuf* buffers, + * the rte_eth_tx_burst() function uses several transmit descriptors + * of the ring. + * + * The rte_eth_tx_burst() function returns the number of packets it + * actually sent. A return value equal to *nb_pkts* means that all packets + * have been sent, and this is likely to signify that other output packets + * could be immediately transmitted again. Applications that implement a + * "send as many packets to transmit as possible" policy can check this + * specific case and keep invoking the rte_eth_tx_burst() function until + * a value less than *nb_pkts* is returned. + * + * It is the responsibility of the rte_eth_tx_burst() function to + * transparently free the memory buffers of packets previously sent. + * This feature is driven by the *tx_free_thresh* value supplied to the + * rte_eth_dev_configure() function at device configuration time. + * When the number of free TX descriptors drops below this threshold, the + * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers + * of those packets whose transmission was effectively completed. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param tx_pkts + * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures + * which contain the output packets. + * @param nb_pkts + * The maximum number of packets to transmit. + * @return + * The number of output packets actually stored in transmit descriptors of + * the transmit ring. The return value can be less than the value of the + * *tx_pkts* parameter when the transmit ring is full or has been filled up. + */ +static inline uint16_t +rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id, + struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); + RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0); + + if (queue_id >= dev->data->nb_tx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id); + return 0; + } +#endif + +#ifdef RTE_ETHDEV_RXTX_CALLBACKS + struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id]; + + if (unlikely(cb != NULL)) { + do { + nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts, + cb->param); + cb = cb->next; + } while (cb != NULL); + } +#endif + + return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts); +} + +typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count, + void *userdata); + +/** + * Structure used to buffer packets for future TX + * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush + */ +struct rte_eth_dev_tx_buffer { + buffer_tx_error_fn error_callback; + void *error_userdata; + uint16_t size; /**< Size of buffer for buffered tx */ + uint16_t length; /**< Number of packets in the array */ + struct rte_mbuf *pkts[]; + /**< Pending packets to be sent on explicit flush or when full */ +}; + +/** + * Calculate the size of the tx buffer. + * + * @param sz + * Number of stored packets. + */ +#define RTE_ETH_TX_BUFFER_SIZE(sz) \ + (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *)) + +/** + * Initialize default values for buffered transmitting + * + * @param buffer + * Tx buffer to be initialized. + * @param size + * Buffer size + * @return + * 0 if no error + */ +int +rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size); + +/** + * Send any packets queued up for transmission on a port and HW queue + * + * This causes an explicit flush of packets previously buffered via the + * rte_eth_tx_buffer() function. It returns the number of packets successfully + * sent to the NIC, and calls the error callback for any unsent packets. Unless + * explicitly set up otherwise, the default callback simply frees the unsent + * packets back to the owning mempool. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param buffer + * Buffer of packets to be transmit. + * @return + * The number of packets successfully sent to the Ethernet device. The error + * callback is called for any packets which could not be sent. + */ +static inline uint16_t +rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id, + struct rte_eth_dev_tx_buffer *buffer) +{ + uint16_t sent; + uint16_t to_send = buffer->length; + + if (to_send == 0) + return 0; + + sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send); + + buffer->length = 0; + + /* All packets sent, or to be dealt with by callback below */ + if (unlikely(sent != to_send)) + buffer->error_callback(&buffer->pkts[sent], to_send - sent, + buffer->error_userdata); + + return sent; +} + +/** + * Buffer a single packet for future transmission on a port and queue + * + * This function takes a single mbuf/packet and buffers it for later + * transmission on the particular port and queue specified. Once the buffer is + * full of packets, an attempt will be made to transmit all the buffered + * packets. In case of error, where not all packets can be transmitted, a + * callback is called with the unsent packets as a parameter. If no callback + * is explicitly set up, the unsent packets are just freed back to the owning + * mempool. The function returns the number of packets actually sent i.e. + * 0 if no buffer flush occurred, otherwise the number of packets successfully + * flushed + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param buffer + * Buffer used to collect packets to be sent. + * @param tx_pkt + * Pointer to the packet mbuf to be sent. + * @return + * 0 = packet has been buffered for later transmission + * N > 0 = packet has been buffered, and the buffer was subsequently flushed, + * causing N packets to be sent, and the error callback to be called for + * the rest. + */ +static inline uint16_t __attribute__((always_inline)) +rte_eth_tx_buffer(uint8_t port_id, uint16_t queue_id, + struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt) +{ + buffer->pkts[buffer->length++] = tx_pkt; + if (buffer->length < buffer->size) + return 0; + + return rte_eth_tx_buffer_flush(port_id, queue_id, buffer); +} + +/** + * Configure a callback for buffered packets which cannot be sent + * + * Register a specific callback to be called when an attempt is made to send + * all packets buffered on an ethernet port, but not all packets can + * successfully be sent. The callback registered here will be called only + * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs. + * The default callback configured for each queue by default just frees the + * packets back to the calling mempool. If additional behaviour is required, + * for example, to count dropped packets, or to retry transmission of packets + * which cannot be sent, this function should be used to register a suitable + * callback function to implement the desired behaviour. + * The example callback "rte_eth_count_unsent_packet_callback()" is also + * provided as reference. + * + * @param buffer + * The port identifier of the Ethernet device. + * @param callback + * The function to be used as the callback. + * @param userdata + * Arbitrary parameter to be passed to the callback function + * @return + * 0 on success, or -1 on error with rte_errno set appropriately + */ +int +rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer, + buffer_tx_error_fn callback, void *userdata); + +/** + * Callback function for silently dropping unsent buffered packets. + * + * This function can be passed to rte_eth_tx_buffer_set_err_callback() to + * adjust the default behavior when buffered packets cannot be sent. This + * function drops any unsent packets silently and is used by tx buffered + * operations as default behavior. + * + * NOTE: this function should not be called directly, instead it should be used + * as a callback for packet buffering. + * + * NOTE: when configuring this function as a callback with + * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter + * should point to an uint64_t value. + * + * @param pkts + * The previously buffered packets which could not be sent + * @param unsent + * The number of unsent packets in the pkts array + * @param userdata + * Not used + */ +void +rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent, + void *userdata); + +/** + * Callback function for tracking unsent buffered packets. + * + * This function can be passed to rte_eth_tx_buffer_set_err_callback() to + * adjust the default behavior when buffered packets cannot be sent. This + * function drops any unsent packets, but also updates a user-supplied counter + * to track the overall number of packets dropped. The counter should be an + * uint64_t variable. + * + * NOTE: this function should not be called directly, instead it should be used + * as a callback for packet buffering. + * + * NOTE: when configuring this function as a callback with + * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter + * should point to an uint64_t value. + * + * @param pkts + * The previously buffered packets which could not be sent + * @param unsent + * The number of unsent packets in the pkts array + * @param userdata + * Pointer to an uint64_t value, which will be incremented by unsent + */ +void +rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent, + void *userdata); + +/** + * The eth device event type for interrupt, and maybe others in the future. + */ +enum rte_eth_event_type { + RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */ + RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */ + RTE_ETH_EVENT_QUEUE_STATE, + /**< queue state event (enabled/disabled) */ + RTE_ETH_EVENT_INTR_RESET, + /**< reset interrupt event, sent to VF on PF reset */ + RTE_ETH_EVENT_MAX /**< max value of this enum */ +}; + +typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \ + enum rte_eth_event_type event, void *cb_arg); +/**< user application callback to be registered for interrupts */ + + + +/** + * Register a callback function for specific port id. + * + * @param port_id + * Port id. + * @param event + * Event interested. + * @param cb_fn + * User supplied callback function to be called. + * @param cb_arg + * Pointer to the parameters for the registered callback. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int rte_eth_dev_callback_register(uint8_t port_id, + enum rte_eth_event_type event, + rte_eth_dev_cb_fn cb_fn, void *cb_arg); + +/** + * Unregister a callback function for specific port id. + * + * @param port_id + * Port id. + * @param event + * Event interested. + * @param cb_fn + * User supplied callback function to be called. + * @param cb_arg + * Pointer to the parameters for the registered callback. -1 means to + * remove all for the same callback address and same event. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int rte_eth_dev_callback_unregister(uint8_t port_id, + enum rte_eth_event_type event, + rte_eth_dev_cb_fn cb_fn, void *cb_arg); + +/** + * @internal Executes all the user application registered callbacks for + * the specific device. It is for DPDK internal user only. User + * application should not call it directly. + * + * @param dev + * Pointer to struct rte_eth_dev. + * @param event + * Eth device interrupt event type. + * + * @return + * void + */ +void _rte_eth_dev_callback_process(struct rte_eth_dev *dev, + enum rte_eth_event_type event); + +/** + * When there is no rx packet coming in Rx Queue for a long time, we can + * sleep lcore related to RX Queue for power saving, and enable rx interrupt + * to be triggered when rx packect arrives. + * + * The rte_eth_dev_rx_intr_enable() function enables rx queue + * interrupt on specific rx queue of a port. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - (0) if successful. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id); + +/** + * When lcore wakes up from rx interrupt indicating packet coming, disable rx + * interrupt and returns to polling mode. + * + * The rte_eth_dev_rx_intr_disable() function disables rx queue + * interrupt on specific rx queue of a port. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - (0) if successful. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id); + +/** + * RX Interrupt control per port. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param epfd + * Epoll instance fd which the intr vector associated to. + * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. + * @param op + * The operation be performed for the vector. + * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. + * @param data + * User raw data. + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data); + +/** + * RX Interrupt control per queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param epfd + * Epoll instance fd which the intr vector associated to. + * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. + * @param op + * The operation be performed for the vector. + * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. + * @param data + * User raw data. + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id, + int epfd, int op, void *data); + +/** + * Turn on the LED on the Ethernet device. + * This function turns on the LED on the Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_led_on(uint8_t port_id); + +/** + * Turn off the LED on the Ethernet device. + * This function turns off the LED on the Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_led_off(uint8_t port_id); + +/** + * Get current status of the Ethernet link flow control for Ethernet device + * + * @param port_id + * The port identifier of the Ethernet device. + * @param fc_conf + * The pointer to the structure where to store the flow control parameters. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support flow control. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_flow_ctrl_get(uint8_t port_id, + struct rte_eth_fc_conf *fc_conf); + +/** + * Configure the Ethernet link flow control for Ethernet device + * + * @param port_id + * The port identifier of the Ethernet device. + * @param fc_conf + * The pointer to the structure of the flow control parameters. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support flow control mode. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter + * - (-EIO) if flow control setup failure + */ +int rte_eth_dev_flow_ctrl_set(uint8_t port_id, + struct rte_eth_fc_conf *fc_conf); + +/** + * Configure the Ethernet priority flow control under DCB environment + * for Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param pfc_conf + * The pointer to the structure of the priority flow control parameters. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support priority flow control mode. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter + * - (-EIO) if flow control setup failure + */ +int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id, + struct rte_eth_pfc_conf *pfc_conf); + +/** + * Add a MAC address to an internal array of addresses used to enable whitelist + * filtering to accept packets only if the destination MAC address matches. + * + * @param port + * The port identifier of the Ethernet device. + * @param mac_addr + * The MAC address to add. + * @param pool + * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is + * not enabled, this should be set to 0. + * @return + * - (0) if successfully added or *mac_addr" was already added. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port* is invalid. + * - (-ENOSPC) if no more MAC addresses can be added. + * - (-EINVAL) if MAC address is invalid. + */ +int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr, + uint32_t pool); + +/** + * Remove a MAC address from the internal array of addresses. + * + * @param port + * The port identifier of the Ethernet device. + * @param mac_addr + * MAC address to remove. + * @return + * - (0) if successful, or *mac_addr* didn't exist. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (-EADDRINUSE) if attempting to remove the default MAC address + */ +int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr); + +/** + * Set the default MAC address. + * + * @param port + * The port identifier of the Ethernet device. + * @param mac_addr + * New default MAC address. + * @return + * - (0) if successful, or *mac_addr* didn't exist. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if MAC address is invalid. + */ +int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr); + + +/** + * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param reta_conf + * RETA to update. + * @param reta_size + * Redirection table size. The table size can be queried by + * rte_eth_dev_info_get(). + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_rss_reta_update(uint8_t port, + struct rte_eth_rss_reta_entry64 *reta_conf, + uint16_t reta_size); + + /** + * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param reta_conf + * RETA to query. + * @param reta_size + * Redirection table size. The table size can be queried by + * rte_eth_dev_info_get(). + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_rss_reta_query(uint8_t port, + struct rte_eth_rss_reta_entry64 *reta_conf, + uint16_t reta_size); + + /** + * Updates unicast hash table for receiving packet with the given destination + * MAC address, and the packet is routed to all VFs for which the RX mode is + * accept packets that match the unicast hash table. + * + * @param port + * The port identifier of the Ethernet device. + * @param addr + * Unicast MAC address. + * @param on + * 1 - Set an unicast hash bit for receiving packets with the MAC address. + * 0 - Clear an unicast hash bit. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr, + uint8_t on); + + /** + * Updates all unicast hash bitmaps for receiving packet with any Unicast + * Ethernet MAC addresses,the packet is routed to all VFs for which the RX + * mode is accept packets that match the unicast hash table. + * + * @param port + * The port identifier of the Ethernet device. + * @param on + * 1 - Set all unicast hash bitmaps for receiving all the Ethernet + * MAC addresses + * 0 - Clear all unicast hash bitmaps + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on); + + /** + * Set RX L2 Filtering mode of a VF of an Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param rx_mode + * The RX mode mask, which is one or more of accepting Untagged Packets, + * packets that match the PFUTA table, Broadcast and Multicast Promiscuous. + * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, + * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used + * in rx_mode. + * @param on + * 1 - Enable a VF RX mode. + * 0 - Disable a VF RX mode. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode, + uint8_t on); + +/** +* Enable or disable a VF traffic transmit of the Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic transmit. +* 0 - Disable a VF traffic transmit. +* @return +* - (0) if successful. +* - (-ENODEV) if *port_id* invalid. +* - (-ENOTSUP) if hardware doesn't support. +* - (-EINVAL) if bad parameter. +*/ +int +rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on); + +/** +* Enable or disable a VF traffic receive of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic receive. +* 0 - Disable a VF traffic receive. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on); + +/** +* Enable/Disable hardware VF VLAN filtering by an Ethernet device of +* received VLAN packets tagged with a given VLAN Tag Identifier. +* +* @param port id +* The port identifier of the Ethernet device. +* @param vlan_id +* The VLAN Tag Identifier whose filtering must be enabled or disabled. +* @param vf_mask +* Bitmap listing which VFs participate in the VLAN filtering. +* @param vlan_on +* 1 - Enable VFs VLAN filtering. +* 0 - Disable VFs VLAN filtering. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id, + uint64_t vf_mask, + uint8_t vlan_on); + +/** + * Set a traffic mirroring rule on an Ethernet device + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mirror_conf + * The pointer to the traffic mirroring structure describing the mirroring rule. + * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule, + * destination pool and the value of rule if enable vlan or pool mirroring. + * + * @param rule_id + * The index of traffic mirroring rule, we support four separated rules. + * @param on + * 1 - Enable a mirroring rule. + * 0 - Disable a mirroring rule. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if the mr_conf information is not correct. + */ +int rte_eth_mirror_rule_set(uint8_t port_id, + struct rte_eth_mirror_conf *mirror_conf, + uint8_t rule_id, + uint8_t on); + +/** + * Reset a traffic mirroring rule on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rule_id + * The index of traffic mirroring rule, we support four separated rules. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_mirror_rule_reset(uint8_t port_id, + uint8_t rule_id); + +/** + * Set the rate limitation for a queue on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_idx + * The queue id. + * @param tx_rate + * The tx rate in Mbps. Allocated from the total port link speed. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, + uint16_t tx_rate); + +/** + * Set the rate limitation for a vf on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param tx_rate + * The tx rate allocated from the total link speed for this VF id. + * @param q_msk + * The queue mask which need to set the rate. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, + uint16_t tx_rate, uint64_t q_msk); + +/** + * Initialize bypass logic. This function needs to be called before + * executing any other bypass API. + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_init(uint8_t port); + +/** + * Return bypass state. + * + * @param port + * The port identifier of the Ethernet device. + * @param state + * The return bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state); + +/** + * Set bypass state + * + * @param port + * The port identifier of the Ethernet device. + * @param new_state + * The current bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state); + +/** + * Return bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The bypass state when given event occurred. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state); + +/** + * Set bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The assigned state when given event occurs. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state); + +/** + * Set bypass watchdog timeout count. + * + * @param port + * The port identifier of the Ethernet device. + * @param timeout + * The timeout to be set. + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout); + +/** + * Get bypass firmware version. + * + * @param port + * The port identifier of the Ethernet device. + * @param ver + * The firmware version + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver); + +/** + * Return bypass watchdog timeout in seconds + * + * @param port + * The port identifier of the Ethernet device. + * @param wd_timeout + * The return watchdog timeout. "0" represents timer expired + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); + +/** + * Reset bypass watchdog timer + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_bypass_wd_reset(uint8_t port); + + /** + * Configuration of Receive Side Scaling hash computation of Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rss_conf + * The new configuration to use for RSS hash computation on the port. + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_eth_dev_rss_hash_update(uint8_t port_id, + struct rte_eth_rss_conf *rss_conf); + + /** + * Retrieve current configuration of Receive Side Scaling hash computation + * of Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rss_conf + * Where to store the current RSS hash configuration of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support RSS. + */ +int +rte_eth_dev_rss_hash_conf_get(uint8_t port_id, + struct rte_eth_rss_conf *rss_conf); + + /** + * Add UDP tunneling port for a specific type of tunnel. + * The packets with this UDP port will be identified as this type of tunnel. + * Before enabling any offloading function for a tunnel, users can call this API + * to change or add more UDP port for the tunnel. So the offloading function + * can take effect on the packets with the sepcific UDP port. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param tunnel_udp + * UDP tunneling configuration. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_udp_tunnel_port_add(uint8_t port_id, + struct rte_eth_udp_tunnel *tunnel_udp); + + /** + * Delete UDP tunneling port a specific type of tunnel. + * The packets with this UDP port will not be identified as this type of tunnel + * any more. + * Before enabling any offloading function for a tunnel, users can call this API + * to delete a UDP port for the tunnel. So the offloading function will not take + * effect on the packets with the sepcific UDP port. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param tunnel_udp + * UDP tunneling configuration. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id, + struct rte_eth_udp_tunnel *tunnel_udp); + +/** + * Check whether the filter type is supported on an Ethernet device. + * All the supported filter types are defined in 'rte_eth_ctrl.h'. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param filter_type + * Filter type. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this filter type. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type); + +/** + * Take operations to assigned filter type on an Ethernet device. + * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param filter_type + * Filter type. + * @param filter_op + * Type of operation. + * @param arg + * A pointer to arguments defined specifically for the operation. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type, + enum rte_filter_op filter_op, void *arg); + +/** + * Get DCB information on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param dcb_info + * dcb information. + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support. + */ +int rte_eth_dev_get_dcb_info(uint8_t port_id, + struct rte_eth_dcb_info *dcb_info); + +/** + * Add a callback to be called on packet RX on a given port and queue. + * + * This API configures a function to be called for each burst of + * packets received on a given NIC port queue. The return value is a pointer + * that can be used to later remove the callback using + * rte_eth_remove_rx_callback(). + * + * Multiple functions are called in the order that they are added. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device on which the callback is to be added. + * @param fn + * The callback function + * @param user_param + * A generic pointer parameter which will be passed to each invocation of the + * callback function on this port and queue. + * + * @return + * NULL on error. + * On success, a pointer value which can later be used to remove the callback. + */ +void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id, + rte_rx_callback_fn fn, void *user_param); + +/** + * Add a callback to be called on packet TX on a given port and queue. + * + * This API configures a function to be called for each burst of + * packets sent on a given NIC port queue. The return value is a pointer + * that can be used to later remove the callback using + * rte_eth_remove_tx_callback(). + * + * Multiple functions are called in the order that they are added. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device on which the callback is to be added. + * @param fn + * The callback function + * @param user_param + * A generic pointer parameter which will be passed to each invocation of the + * callback function on this port and queue. + * + * @return + * NULL on error. + * On success, a pointer value which can later be used to remove the callback. + */ +void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id, + rte_tx_callback_fn fn, void *user_param); + +/** + * Remove an RX packet callback from a given port and queue. + * + * This function is used to removed callbacks that were added to a NIC port + * queue using rte_eth_add_rx_callback(). + * + * Note: the callback is removed from the callback list but it isn't freed + * since the it may still be in use. The memory for the callback can be + * subsequently freed back by the application by calling rte_free(): + * + * - Immediately - if the port is stopped, or the user knows that no + * callbacks are in flight e.g. if called from the thread doing RX/TX + * on that queue. + * + * - After a short delay - where the delay is sufficient to allow any + * in-flight callbacks to complete. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device from which the callback is to be removed. + * @param user_cb + * User supplied callback created via rte_eth_add_rx_callback(). + * + * @return + * - 0: Success. Callback was removed. + * - -ENOTSUP: Callback support is not available. + * - -EINVAL: The port_id or the queue_id is out of range, or the callback + * is NULL or not found for the port/queue. + */ +int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id, + struct rte_eth_rxtx_callback *user_cb); + +/** + * Remove a TX packet callback from a given port and queue. + * + * This function is used to removed callbacks that were added to a NIC port + * queue using rte_eth_add_tx_callback(). + * + * Note: the callback is removed from the callback list but it isn't freed + * since the it may still be in use. The memory for the callback can be + * subsequently freed back by the application by calling rte_free(): + * + * - Immediately - if the port is stopped, or the user knows that no + * callbacks are in flight e.g. if called from the thread doing RX/TX + * on that queue. + * + * - After a short delay - where the delay is sufficient to allow any + * in-flight callbacks to complete. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device from which the callback is to be removed. + * @param user_cb + * User supplied callback created via rte_eth_add_tx_callback(). + * + * @return + * - 0: Success. Callback was removed. + * - -ENOTSUP: Callback support is not available. + * - -EINVAL: The port_id or the queue_id is out of range, or the callback + * is NULL or not found for the port/queue. + */ +int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id, + struct rte_eth_rxtx_callback *user_cb); + +/** + * Retrieve information about given port's RX queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The RX queue on the Ethernet device for which information + * will be retrieved. + * @param qinfo + * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with + * the information of the Ethernet device. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id, + struct rte_eth_rxq_info *qinfo); + +/** + * Retrieve information about given port's TX queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The TX queue on the Ethernet device for which information + * will be retrieved. + * @param qinfo + * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with + * the information of the Ethernet device. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id, + struct rte_eth_txq_info *qinfo); + +/* + * Retrieve number of available registers for access + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>=0) number of registers if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_reg_length(uint8_t port_id); + +/** + * Retrieve device registers and register attributes + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes buffer for register data and attribute to be filled. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info); + +/** + * Retrieve size of device EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>=0) EEPROM size if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_eeprom_length(uint8_t port_id); + +/** + * Retrieve EEPROM and EEPROM attribute + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes buffer for return EEPROM data and + * EEPROM attributes to be filled. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info); + +/** + * Program EEPROM with provided data + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes EEPROM data for programming and + * EEPROM attributes to be filled + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info); + +/** + * Set the list of multicast addresses to filter on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mc_addr_set + * The array of multicast addresses to set. Equal to NULL when the function + * is invoked to flush the set of filtered addresses. + * @param nb_mc_addr + * The number of multicast addresses in the *mc_addr_set* array. Equal to 0 + * when the function is invoked to flush the set of filtered addresses. + * @return + * - (0) if successful. + * - (-ENODEV) if *port_id* invalid. + * - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering. + * - (-ENOSPC) if *port_id* has not enough multicast filtering resources. + */ +int rte_eth_dev_set_mc_addr_list(uint8_t port_id, + struct ether_addr *mc_addr_set, + uint32_t nb_mc_addr); + +/** + * Enable IEEE1588/802.1AS timestamping for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_enable(uint8_t port_id); + +/** + * Disable IEEE1588/802.1AS timestamping for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_disable(uint8_t port_id); + +/** + * Read an IEEE1588/802.1AS RX timestamp from an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param timestamp + * Pointer to the timestamp struct. + * @param flags + * Device specific flags. Used to pass the RX timesync register index to + * i40e. Unused in igb/ixgbe, pass 0 instead. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_read_rx_timestamp(uint8_t port_id, + struct timespec *timestamp, uint32_t flags); + +/** + * Read an IEEE1588/802.1AS TX timestamp from an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param timestamp + * Pointer to the timestamp struct. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_read_tx_timestamp(uint8_t port_id, + struct timespec *timestamp); + +/** + * Adjust the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param delta + * The adjustment in nanoseconds. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta); + +/** + * Read the time from the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param time + * Pointer to the timespec struct that holds the time. + * + * @return + * - 0: Success. + */ +int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time); + +/** + * Set the time of the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param time + * Pointer to the timespec struct that holds the time. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time); + +/** + * Copy pci device info to the Ethernet device data. + * + * @param eth_dev + * The *eth_dev* pointer is the address of the *rte_eth_dev* structure. + * @param pci_dev + * The *pci_dev* pointer is the address of the *rte_pci_device* structure. + * + * @return + * - 0 on success, negative on error + */ +void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev, + struct rte_pci_device *pci_dev); + +/** + * Create memzone for HW rings. + * malloc can't be used as the physical address is needed. + * If the memzone is already created, then this function returns a ptr + * to the old one. + * + * @param eth_dev + * The *eth_dev* pointer is the address of the *rte_eth_dev* structure + * @param name + * The name of the memory zone + * @param queue_id + * The index of the queue to add to name + * @param size + * The sizeof of the memory area + * @param align + * Alignment for resulting memzone. Must be a power of 2. + * @param socket_id + * The *socket_id* argument is the socket identifier in case of NUMA. + */ +const struct rte_memzone * +rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name, + uint16_t queue_id, size_t size, + unsigned align, int socket_id); + +/** + * Config l2 tunnel ether type of an Ethernet device for filtering specific + * tunnel packets by ether type. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param l2_tunnel + * l2 tunnel configuration. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id, + struct rte_eth_l2_tunnel_conf *l2_tunnel); + +/** + * Enable/disable l2 tunnel offload functions. Include, + * 1, The ability of parsing a type of l2 tunnel of an Ethernet device. + * Filtering, forwarding and offloading this type of tunnel packets depend on + * this ability. + * 2, Stripping the l2 tunnel tag. + * 3, Insertion of the l2 tunnel tag. + * 4, Forwarding the packets based on the l2 tunnel tag. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param l2_tunnel + * l2 tunnel parameters. + * @param mask + * Indicate the offload function. + * @param en + * Enable or disable this function. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id, + struct rte_eth_l2_tunnel_conf *l2_tunnel, + uint32_t mask, + uint8_t en); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_ETHDEV_H_ */ -- cgit 1.2.3-korg