From 5129044dce1f85ce4950f31bcf90f3886466f06a Mon Sep 17 00:00:00 2001 From: "C.J. Collier" Date: Tue, 14 Jun 2016 07:54:47 -0700 Subject: Imported upstream release 16.04 * gbp import-orig ../dpdk-16.04.tar.xz Change-Id: Iac2196db782ba322f6974d8a752acc34ce5024c3 Signed-off-by: C.J. Collier --- lib/librte_mbuf/rte_mbuf.h | 1946 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1946 insertions(+) create mode 100644 lib/librte_mbuf/rte_mbuf.h (limited to 'lib/librte_mbuf/rte_mbuf.h') diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h new file mode 100644 index 00000000..75a227d8 --- /dev/null +++ b/lib/librte_mbuf/rte_mbuf.h @@ -0,0 +1,1946 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * Copyright 2014 6WIND S.A. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _RTE_MBUF_H_ +#define _RTE_MBUF_H_ + +/** + * @file + * RTE Mbuf + * + * The mbuf library provides the ability to create and destroy buffers + * that may be used by the RTE application to store message + * buffers. The message buffers are stored in a mempool, using the + * RTE mempool library. + * + * This library provide an API to allocate/free packet mbufs, which are + * used to carry network packets. + * + * To understand the concepts of packet buffers or mbufs, you + * should read "TCP/IP Illustrated, Volume 2: The Implementation, + * Addison-Wesley, 1995, ISBN 0-201-63354-X from Richard Stevens" + * http://www.kohala.com/start/tcpipiv2.html + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* deprecated options */ +#pragma GCC poison RTE_MBUF_SCATTER_GATHER +#pragma GCC poison RTE_MBUF_REFCNT + +/* + * Packet Offload Features Flags. It also carry packet type information. + * Critical resources. Both rx/tx shared these bits. Be cautious on any change + * + * - RX flags start at bit position zero, and get added to the left of previous + * flags. + * - The most-significant 3 bits are reserved for generic mbuf flags + * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get + * added to the right of the previously defined flags i.e. they should count + * downwards, not upwards. + * + * Keep these flags synchronized with rte_get_rx_ol_flag_name() and + * rte_get_tx_ol_flag_name(). + */ +#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */ +#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */ +#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */ +#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */ +#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */ +#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */ +#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */ +#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */ +#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */ +#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */ +#define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */ +#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/ +#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */ +#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */ +#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */ +/* add new RX flags here */ + +/* add new TX flags here */ + +/** + * Second VLAN insertion (QinQ) flag. + */ +#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */ + +/** + * TCP segmentation offload. To enable this offload feature for a + * packet to be transmitted on hardware supporting TSO: + * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies + * PKT_TX_TCP_CKSUM) + * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 + * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum + * to 0 in the packet + * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz + * - calculate the pseudo header checksum without taking ip_len in account, + * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and + * rte_ipv6_phdr_cksum() that can be used as helpers. + */ +#define PKT_TX_TCP_SEG (1ULL << 50) + +#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */ + +/** + * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved, + * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware + * L4 checksum offload, the user needs to: + * - fill l2_len and l3_len in mbuf + * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM + * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 + * - calculate the pseudo header checksum and set it in the L4 header (only + * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum(). + * For SCTP, set the crc field to 0. + */ +#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */ +#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_SCTP_CKSUM (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_UDP_CKSUM (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_L4_MASK (3ULL << 52) /**< Mask for L4 cksum offload request. */ + +/** + * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should + * also be set by the application, although a PMD will only check + * PKT_TX_IP_CKSUM. + * - set the IP checksum field in the packet to 0 + * - fill the mbuf offload information: l2_len, l3_len + */ +#define PKT_TX_IP_CKSUM (1ULL << 54) + +/** + * Packet is IPv4. This flag must be set when using any offload feature + * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4 + * packet. If the packet is a tunneled packet, this flag is related to + * the inner headers. + */ +#define PKT_TX_IPV4 (1ULL << 55) + +/** + * Packet is IPv6. This flag must be set when using an offload feature + * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6 + * packet. If the packet is a tunneled packet, this flag is related to + * the inner headers. + */ +#define PKT_TX_IPV6 (1ULL << 56) + +#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */ + +/** + * Offload the IP checksum of an external header in the hardware. The + * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh + * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the + * packet must be set to 0. + * - set the outer IP checksum field in the packet to 0 + * - fill the mbuf offload information: outer_l2_len, outer_l3_len + */ +#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58) + +/** + * Packet outer header is IPv4. This flag must be set when using any + * outer offload feature (L3 or L4 checksum) to tell the NIC that the + * outer header of the tunneled packet is an IPv4 packet. + */ +#define PKT_TX_OUTER_IPV4 (1ULL << 59) + +/** + * Packet outer header is IPv6. This flag must be set when using any + * outer offload feature (L4 checksum) to tell the NIC that the outer + * header of the tunneled packet is an IPv6 packet. + */ +#define PKT_TX_OUTER_IPV6 (1ULL << 60) + +#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ + +#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */ + +/* Use final bit of flags to indicate a control mbuf */ +#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */ + +/* + * 32 bits are divided into several fields to mark packet types. Note that + * each field is indexical. + * - Bit 3:0 is for L2 types. + * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types. + * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types. + * - Bit 15:12 is for tunnel types. + * - Bit 19:16 is for inner L2 types. + * - Bit 23:20 is for inner L3 types. + * - Bit 27:24 is for inner L4 types. + * - Bit 31:28 is reserved. + * + * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, + * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP + * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits. + * + * Note that L3 types values are selected for checking IPV4/IPV6 header from + * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and + * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values. + * + * Note that the packet types of the same packet recognized by different + * hardware may be different, as different hardware may have different + * capability of packet type recognition. + * + * examples: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=0x29 + * | 'version'=6, 'next header'=0x3A + * | 'ICMPv6 header'> + * will be recognized on i40e hardware as packet type combination of, + * RTE_PTYPE_L2_ETHER | + * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN | + * RTE_PTYPE_TUNNEL_IP | + * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_INNER_L4_ICMP. + * + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x2F + * | 'GRE header' + * | 'version'=6, 'next header'=0x11 + * | 'UDP header'> + * will be recognized on i40e hardware as packet type combination of, + * RTE_PTYPE_L2_ETHER | + * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_TUNNEL_GRENAT | + * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_INNER_L4_UDP. + */ +#define RTE_PTYPE_UNKNOWN 0x00000000 +/** + * Ethernet packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=[0x0800|0x86DD]> + */ +#define RTE_PTYPE_L2_ETHER 0x00000001 +/** + * Ethernet packet type for time sync. + * + * Packet format: + * <'ether type'=0x88F7> + */ +#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002 +/** + * ARP (Address Resolution Protocol) packet type. + * + * Packet format: + * <'ether type'=0x0806> + */ +#define RTE_PTYPE_L2_ETHER_ARP 0x00000003 +/** + * LLDP (Link Layer Discovery Protocol) packet type. + * + * Packet format: + * <'ether type'=0x88CC> + */ +#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004 +/** + * Mask of layer 2 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L2_MASK 0x0000000f +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and does not contain any + * header option. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=5> + */ +#define RTE_PTYPE_L3_IPV4 0x00000010 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and contains header + * options. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[6-15], 'options'> + */ +#define RTE_PTYPE_L3_IPV4_EXT 0x00000030 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and does not contain any + * extension header. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x3B> + */ +#define RTE_PTYPE_L3_IPV6 0x00000040 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and may or maynot contain + * header options. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[5-15], <'options'>> + */ +#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and contains extension + * headers. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * 'extension headers'> + */ +#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and may or maynot contain + * extension headers. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * <'extension headers'>> + */ +#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0 +/** + * Mask of layer 3 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L3_MASK 0x000000f0 +/** + * TCP (Transmission Control Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=6, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=6> + */ +#define RTE_PTYPE_L4_TCP 0x00000100 +/** + * UDP (User Datagram Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17> + */ +#define RTE_PTYPE_L4_UDP 0x00000200 +/** + * Fragmented IP (Internet Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * It refers to those packets of any IP types, which can be recognized as + * fragmented. A fragmented packet cannot be recognized as any other L4 types + * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, + * RTE_PTYPE_L4_NONFRAG). + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'MF'=1> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=44> + */ +#define RTE_PTYPE_L4_FRAG 0x00000300 +/** + * SCTP (Stream Control Transmission Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=132, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=132> + */ +#define RTE_PTYPE_L4_SCTP 0x00000400 +/** + * ICMP (Internet Control Message Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=1, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=1> + */ +#define RTE_PTYPE_L4_ICMP 0x00000500 +/** + * Non-fragmented IP (Internet Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * It refers to those packets of any IP types, while cannot be recognized as + * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, + * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP). + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'!=[6|17|44|132|1]> + */ +#define RTE_PTYPE_L4_NONFRAG 0x00000600 +/** + * Mask of layer 4 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L4_MASK 0x00000f00 +/** + * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=[4|41]> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[4|41]> + */ +#define RTE_PTYPE_TUNNEL_IP 0x00001000 +/** + * GRE (Generic Routing Encapsulation) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=47> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=47> + */ +#define RTE_PTYPE_TUNNEL_GRE 0x00002000 +/** + * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17 + * | 'destination port'=4798> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17 + * | 'destination port'=4798> + */ +#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000 +/** + * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling + * packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=47 + * | 'protocol type'=0x6558> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=47 + * | 'protocol type'=0x6558'> + */ +#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000 +/** + * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17 + * | 'destination port'=6081> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17 + * | 'destination port'=6081> + */ +#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000 +/** + * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area + * Network) or GRE (Generic Routing Encapsulation) could be recognized as this + * packet type, if they can not be recognized independently as of hardware + * capability. + */ +#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000 +/** + * Mask of tunneling packet types. + */ +#define RTE_PTYPE_TUNNEL_MASK 0x0000f000 +/** + * Ethernet packet type. + * It is used for inner packet type only. + * + * Packet format (inner only): + * <'ether type'=[0x800|0x86DD]> + */ +#define RTE_PTYPE_INNER_L2_ETHER 0x00010000 +/** + * Ethernet packet type with VLAN (Virtual Local Area Network) tag. + * + * Packet format (inner only): + * <'ether type'=[0x800|0x86DD], vlan=[1-4095]> + */ +#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000 +/** + * Mask of inner layer 2 packet types. + */ +#define RTE_PTYPE_INNER_L2_MASK 0x000f0000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and does not contain any header option. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=5> + */ +#define RTE_PTYPE_INNER_L3_IPV4 0x00100000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and contains header options. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[6-15], 'options'> + */ +#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and does not contain any extension header. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x3B> + */ +#define RTE_PTYPE_INNER_L3_IPV6 0x00300000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and may or maynot contain header options. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[5-15], <'options'>> + */ +#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and contains extension headers. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * 'extension headers'> + */ +#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and may or maynot contain extension + * headers. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * <'extension headers'>> + */ +#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000 +/** + * Mask of inner layer 3 packet types. + */ +#define RTE_PTYPE_INNER_L3_MASK 0x00f00000 +/** + * TCP (Transmission Control Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=6, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=6> + */ +#define RTE_PTYPE_INNER_L4_TCP 0x01000000 +/** + * UDP (User Datagram Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17> + */ +#define RTE_PTYPE_INNER_L4_UDP 0x02000000 +/** + * Fragmented IP (Internet Protocol) packet type. + * It is used for inner packet only, and may or maynot have layer 4 packet. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'MF'=1> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=44> + */ +#define RTE_PTYPE_INNER_L4_FRAG 0x03000000 +/** + * SCTP (Stream Control Transmission Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=132, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=132> + */ +#define RTE_PTYPE_INNER_L4_SCTP 0x04000000 +/** + * ICMP (Internet Control Message Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=1, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=1> + */ +#define RTE_PTYPE_INNER_L4_ICMP 0x05000000 +/** + * Non-fragmented IP (Internet Protocol) packet type. + * It is used for inner packet only, and may or maynot have other unknown layer + * 4 packet types. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'!=[6|17|44|132|1]> + */ +#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000 +/** + * Mask of inner layer 4 packet types. + */ +#define RTE_PTYPE_INNER_L4_MASK 0x0f000000 + +/** + * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by + * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can + * determine if it is an IPV4 packet. + */ +#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4) + +/** + * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by + * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can + * determine if it is an IPV4 packet. + */ +#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6) + +/* Check if it is a tunneling packet */ +#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \ + RTE_PTYPE_INNER_L2_MASK | \ + RTE_PTYPE_INNER_L3_MASK | \ + RTE_PTYPE_INNER_L4_MASK)) + +/** Alignment constraint of mbuf private area. */ +#define RTE_MBUF_PRIV_ALIGN 8 + +/** + * Get the name of a RX offload flag + * + * @param mask + * The mask describing the flag. + * @return + * The name of this flag, or NULL if it's not a valid RX flag. + */ +const char *rte_get_rx_ol_flag_name(uint64_t mask); + +/** + * Get the name of a TX offload flag + * + * @param mask + * The mask describing the flag. Usually only one bit must be set. + * Several bits can be given if they belong to the same mask. + * Ex: PKT_TX_L4_MASK. + * @return + * The name of this flag, or NULL if it's not a valid TX flag. + */ +const char *rte_get_tx_ol_flag_name(uint64_t mask); + +/** + * Some NICs need at least 2KB buffer to RX standard Ethernet frame without + * splitting it into multiple segments. + * So, for mbufs that planned to be involved into RX/TX, the recommended + * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM. + */ +#define RTE_MBUF_DEFAULT_DATAROOM 2048 +#define RTE_MBUF_DEFAULT_BUF_SIZE \ + (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM) + +/* define a set of marker types that can be used to refer to set points in the + * mbuf */ +typedef void *MARKER[0]; /**< generic marker for a point in a structure */ +typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */ +typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes + * with a single assignment */ + +/** + * The generic rte_mbuf, containing a packet mbuf. + */ +struct rte_mbuf { + MARKER cacheline0; + + void *buf_addr; /**< Virtual address of segment buffer. */ + phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */ + + uint16_t buf_len; /**< Length of segment buffer. */ + + /* next 6 bytes are initialised on RX descriptor rearm */ + MARKER8 rearm_data; + uint16_t data_off; + + /** + * 16-bit Reference counter. + * It should only be accessed using the following functions: + * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and + * rte_mbuf_refcnt_set(). The functionality of these functions (atomic, + * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC + * config option. + */ + union { + rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */ + uint16_t refcnt; /**< Non-atomically accessed refcnt */ + }; + uint8_t nb_segs; /**< Number of segments. */ + uint8_t port; /**< Input port. */ + + uint64_t ol_flags; /**< Offload features. */ + + /* remaining bytes are set on RX when pulling packet from descriptor */ + MARKER rx_descriptor_fields1; + + /* + * The packet type, which is the combination of outer/inner L2, L3, L4 + * and tunnel types. + */ + union { + uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */ + struct { + uint32_t l2_type:4; /**< (Outer) L2 type. */ + uint32_t l3_type:4; /**< (Outer) L3 type. */ + uint32_t l4_type:4; /**< (Outer) L4 type. */ + uint32_t tun_type:4; /**< Tunnel type. */ + uint32_t inner_l2_type:4; /**< Inner L2 type. */ + uint32_t inner_l3_type:4; /**< Inner L3 type. */ + uint32_t inner_l4_type:4; /**< Inner L4 type. */ + }; + }; + + uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ + uint16_t data_len; /**< Amount of data in segment buffer. */ + uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */ + + union { + uint32_t rss; /**< RSS hash result if RSS enabled */ + struct { + union { + struct { + uint16_t hash; + uint16_t id; + }; + uint32_t lo; + /**< Second 4 flexible bytes */ + }; + uint32_t hi; + /**< First 4 flexible bytes or FD ID, dependent on + PKT_RX_FDIR_* flag in ol_flags. */ + } fdir; /**< Filter identifier if FDIR enabled */ + struct { + uint32_t lo; + uint32_t hi; + } sched; /**< Hierarchical scheduler */ + uint32_t usr; /**< User defined tags. See rte_distributor_process() */ + } hash; /**< hash information */ + + uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */ + + uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */ + + /* second cache line - fields only used in slow path or on TX */ + MARKER cacheline1 __rte_cache_min_aligned; + + union { + void *userdata; /**< Can be used for external metadata */ + uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */ + }; + + struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */ + struct rte_mbuf *next; /**< Next segment of scattered packet. */ + + /* fields to support TX offloads */ + union { + uint64_t tx_offload; /**< combined for easy fetch */ + struct { + uint64_t l2_len:7; /**< L2 (MAC) Header Length. */ + uint64_t l3_len:9; /**< L3 (IP) Header Length. */ + uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */ + uint64_t tso_segsz:16; /**< TCP TSO segment size */ + + /* fields for TX offloading of tunnels */ + uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */ + uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */ + + /* uint64_t unused:8; */ + }; + }; + + /** Size of the application private data. In case of an indirect + * mbuf, it stores the direct mbuf private data size. */ + uint16_t priv_size; + + /** Timesync flags for use with IEEE1588. */ + uint16_t timesync; +} __rte_cache_aligned; + +static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp); + +/** + * Return the DMA address of the beginning of the mbuf data + * + * @param mb + * The pointer to the mbuf. + * @return + * The physical address of the beginning of the mbuf data + */ +static inline phys_addr_t +rte_mbuf_data_dma_addr(const struct rte_mbuf *mb) +{ + return mb->buf_physaddr + mb->data_off; +} + +/** + * Return the default DMA address of the beginning of the mbuf data + * + * This function is used by drivers in their receive function, as it + * returns the location where data should be written by the NIC, taking + * the default headroom in account. + * + * @param mb + * The pointer to the mbuf. + * @return + * The physical address of the beginning of the mbuf data + */ +static inline phys_addr_t +rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb) +{ + return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM; +} + +/** + * Return the mbuf owning the data buffer address of an indirect mbuf. + * + * @param mi + * The pointer to the indirect mbuf. + * @return + * The address of the direct mbuf corresponding to buffer_addr. + */ +static inline struct rte_mbuf * +rte_mbuf_from_indirect(struct rte_mbuf *mi) +{ + return (struct rte_mbuf *)RTE_PTR_SUB(mi->buf_addr, sizeof(*mi) + mi->priv_size); +} + +/** + * Return the buffer address embedded in the given mbuf. + * + * @param md + * The pointer to the mbuf. + * @return + * The address of the data buffer owned by the mbuf. + */ +static inline char * +rte_mbuf_to_baddr(struct rte_mbuf *md) +{ + char *buffer_addr; + buffer_addr = (char *)md + sizeof(*md) + rte_pktmbuf_priv_size(md->pool); + return buffer_addr; +} + +/** + * Returns TRUE if given mbuf is indirect, or FALSE otherwise. + */ +#define RTE_MBUF_INDIRECT(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF) + +/** + * Returns TRUE if given mbuf is direct, or FALSE otherwise. + */ +#define RTE_MBUF_DIRECT(mb) (!RTE_MBUF_INDIRECT(mb)) + +/** + * Private data in case of pktmbuf pool. + * + * A structure that contains some pktmbuf_pool-specific data that are + * appended after the mempool structure (in private data). + */ +struct rte_pktmbuf_pool_private { + uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */ + uint16_t mbuf_priv_size; /**< Size of private area in each mbuf. */ +}; + +#ifdef RTE_LIBRTE_MBUF_DEBUG + +/** check mbuf type in debug mode */ +#define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h) + +/** check mbuf type in debug mode if mbuf pointer is not null */ +#define __rte_mbuf_sanity_check_raw(m, is_h) do { \ + if ((m) != NULL) \ + rte_mbuf_sanity_check(m, is_h); \ +} while (0) + +/** MBUF asserts in debug mode */ +#define RTE_MBUF_ASSERT(exp) \ +if (!(exp)) { \ + rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \ +} + +#else /* RTE_LIBRTE_MBUF_DEBUG */ + +/** check mbuf type in debug mode */ +#define __rte_mbuf_sanity_check(m, is_h) do { } while (0) + +/** check mbuf type in debug mode if mbuf pointer is not null */ +#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0) + +/** MBUF asserts in debug mode */ +#define RTE_MBUF_ASSERT(exp) do { } while (0) + +#endif /* RTE_LIBRTE_MBUF_DEBUG */ + +#ifdef RTE_MBUF_REFCNT_ATOMIC + +/** + * Reads the value of an mbuf's refcnt. + * @param m + * Mbuf to read + * @return + * Reference count number. + */ +static inline uint16_t +rte_mbuf_refcnt_read(const struct rte_mbuf *m) +{ + return (uint16_t)(rte_atomic16_read(&m->refcnt_atomic)); +} + +/** + * Sets an mbuf's refcnt to a defined value. + * @param m + * Mbuf to update + * @param new_value + * Value set + */ +static inline void +rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value) +{ + rte_atomic16_set(&m->refcnt_atomic, new_value); +} + +/** + * Adds given value to an mbuf's refcnt and returns its new value. + * @param m + * Mbuf to update + * @param value + * Value to add/subtract + * @return + * Updated value + */ +static inline uint16_t +rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + /* + * The atomic_add is an expensive operation, so we don't want to + * call it in the case where we know we are the uniq holder of + * this mbuf (i.e. ref_cnt == 1). Otherwise, an atomic + * operation has to be used because concurrent accesses on the + * reference counter can occur. + */ + if (likely(rte_mbuf_refcnt_read(m) == 1)) { + rte_mbuf_refcnt_set(m, 1 + value); + return 1 + value; + } + + return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value)); +} + +#else /* ! RTE_MBUF_REFCNT_ATOMIC */ + +/** + * Adds given value to an mbuf's refcnt and returns its new value. + */ +static inline uint16_t +rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + m->refcnt = (uint16_t)(m->refcnt + value); + return m->refcnt; +} + +/** + * Reads the value of an mbuf's refcnt. + */ +static inline uint16_t +rte_mbuf_refcnt_read(const struct rte_mbuf *m) +{ + return m->refcnt; +} + +/** + * Sets an mbuf's refcnt to the defined value. + */ +static inline void +rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value) +{ + m->refcnt = new_value; +} + +#endif /* RTE_MBUF_REFCNT_ATOMIC */ + +/** Mbuf prefetch */ +#define RTE_MBUF_PREFETCH_TO_FREE(m) do { \ + if ((m) != NULL) \ + rte_prefetch0(m); \ +} while (0) + + +/** + * Sanity checks on an mbuf. + * + * Check the consistency of the given mbuf. The function will cause a + * panic if corruption is detected. + * + * @param m + * The mbuf to be checked. + * @param is_header + * True if the mbuf is a packet header, false if it is a sub-segment + * of a packet (in this case, some fields like nb_segs are not checked) + */ +void +rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header); + +/** + * @internal Allocate a new mbuf from mempool *mp*. + * The use of that function is reserved for RTE internal needs. + * Please use rte_pktmbuf_alloc(). + * + * @param mp + * The mempool from which mbuf is allocated. + * @return + * - The pointer to the new mbuf on success. + * - NULL if allocation failed. + */ +static inline struct rte_mbuf *__rte_mbuf_raw_alloc(struct rte_mempool *mp) +{ + struct rte_mbuf *m; + void *mb = NULL; + if (rte_mempool_get(mp, &mb) < 0) + return NULL; + m = (struct rte_mbuf *)mb; + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0); + rte_mbuf_refcnt_set(m, 1); + return m; +} + +/** + * @internal Put mbuf back into its original mempool. + * The use of that function is reserved for RTE internal needs. + * Please use rte_pktmbuf_free(). + * + * @param m + * The mbuf to be freed. + */ +static inline void __attribute__((always_inline)) +__rte_mbuf_raw_free(struct rte_mbuf *m) +{ + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0); + rte_mempool_put(m->pool, m); +} + +/* Operations on ctrl mbuf */ + +/** + * The control mbuf constructor. + * + * This function initializes some fields in an mbuf structure that are + * not modified by the user once created (mbuf type, origin pool, buffer + * start address, and so on). This function is given as a callback function + * to rte_mempool_create() at pool creation time. + * + * @param mp + * The mempool from which the mbuf is allocated. + * @param opaque_arg + * A pointer that can be used by the user to retrieve useful information + * for mbuf initialization. This pointer comes from the ``init_arg`` + * parameter of rte_mempool_create(). + * @param m + * The mbuf to initialize. + * @param i + * The index of the mbuf in the pool table. + */ +void rte_ctrlmbuf_init(struct rte_mempool *mp, void *opaque_arg, + void *m, unsigned i); + +/** + * Allocate a new mbuf (type is ctrl) from mempool *mp*. + * + * This new mbuf is initialized with data pointing to the beginning of + * buffer, and with a length of zero. + * + * @param mp + * The mempool from which the mbuf is allocated. + * @return + * - The pointer to the new mbuf on success. + * - NULL if allocation failed. + */ +#define rte_ctrlmbuf_alloc(mp) rte_pktmbuf_alloc(mp) + +/** + * Free a control mbuf back into its original mempool. + * + * @param m + * The control mbuf to be freed. + */ +#define rte_ctrlmbuf_free(m) rte_pktmbuf_free(m) + +/** + * A macro that returns the pointer to the carried data. + * + * The value that can be read or assigned. + * + * @param m + * The control mbuf. + */ +#define rte_ctrlmbuf_data(m) ((char *)((m)->buf_addr) + (m)->data_off) + +/** + * A macro that returns the length of the carried data. + * + * The value that can be read or assigned. + * + * @param m + * The control mbuf. + */ +#define rte_ctrlmbuf_len(m) rte_pktmbuf_data_len(m) + +/** + * Tests if an mbuf is a control mbuf + * + * @param m + * The mbuf to be tested + * @return + * - True (1) if the mbuf is a control mbuf + * - False(0) otherwise + */ +static inline int +rte_is_ctrlmbuf(struct rte_mbuf *m) +{ + return !!(m->ol_flags & CTRL_MBUF_FLAG); +} + +/* Operations on pkt mbuf */ + +/** + * The packet mbuf constructor. + * + * This function initializes some fields in the mbuf structure that are + * not modified by the user once created (origin pool, buffer start + * address, and so on). This function is given as a callback function to + * rte_mempool_create() at pool creation time. + * + * @param mp + * The mempool from which mbufs originate. + * @param opaque_arg + * A pointer that can be used by the user to retrieve useful information + * for mbuf initialization. This pointer comes from the ``init_arg`` + * parameter of rte_mempool_create(). + * @param m + * The mbuf to initialize. + * @param i + * The index of the mbuf in the pool table. + */ +void rte_pktmbuf_init(struct rte_mempool *mp, void *opaque_arg, + void *m, unsigned i); + + +/** + * A packet mbuf pool constructor. + * + * This function initializes the mempool private data in the case of a + * pktmbuf pool. This private data is needed by the driver. The + * function is given as a callback function to rte_mempool_create() at + * pool creation. It can be extended by the user, for example, to + * provide another packet size. + * + * @param mp + * The mempool from which mbufs originate. + * @param opaque_arg + * A pointer that can be used by the user to retrieve useful information + * for mbuf initialization. This pointer comes from the ``init_arg`` + * parameter of rte_mempool_create(). + */ +void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg); + +/** + * Create a mbuf pool. + * + * This function creates and initializes a packet mbuf pool. It is + * a wrapper to rte_mempool_create() with the proper packet constructor + * and mempool constructor. + * + * @param name + * The name of the mbuf pool. + * @param n + * The number of elements in the mbuf pool. The optimum size (in terms + * of memory usage) for a mempool is when n is a power of two minus one: + * n = (2^q - 1). + * @param cache_size + * Size of the per-core object cache. See rte_mempool_create() for + * details. + * @param priv_size + * Size of application private are between the rte_mbuf structure + * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN. + * @param data_room_size + * Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM. + * @param socket_id + * The socket identifier where the memory should be allocated. The + * value can be *SOCKET_ID_ANY* if there is no NUMA constraint for the + * reserved zone. + * @return + * The pointer to the new allocated mempool, on success. NULL on error + * with rte_errno set appropriately. Possible rte_errno values include: + * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure + * - E_RTE_SECONDARY - function was called from a secondary process instance + * - EINVAL - cache size provided is too large, or priv_size is not aligned. + * - ENOSPC - the maximum number of memzones has already been allocated + * - EEXIST - a memzone with the same name already exists + * - ENOMEM - no appropriate memory area found in which to create memzone + */ +struct rte_mempool * +rte_pktmbuf_pool_create(const char *name, unsigned n, + unsigned cache_size, uint16_t priv_size, uint16_t data_room_size, + int socket_id); + +/** + * Get the data room size of mbufs stored in a pktmbuf_pool + * + * The data room size is the amount of data that can be stored in a + * mbuf including the headroom (RTE_PKTMBUF_HEADROOM). + * + * @param mp + * The packet mbuf pool. + * @return + * The data room size of mbufs stored in this mempool. + */ +static inline uint16_t +rte_pktmbuf_data_room_size(struct rte_mempool *mp) +{ + struct rte_pktmbuf_pool_private *mbp_priv; + + mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp); + return mbp_priv->mbuf_data_room_size; +} + +/** + * Get the application private size of mbufs stored in a pktmbuf_pool + * + * The private size of mbuf is a zone located between the rte_mbuf + * structure and the data buffer where an application can store data + * associated to a packet. + * + * @param mp + * The packet mbuf pool. + * @return + * The private size of mbufs stored in this mempool. + */ +static inline uint16_t +rte_pktmbuf_priv_size(struct rte_mempool *mp) +{ + struct rte_pktmbuf_pool_private *mbp_priv; + + mbp_priv = (struct rte_pktmbuf_pool_private *)rte_mempool_get_priv(mp); + return mbp_priv->mbuf_priv_size; +} + +/** + * Reset the fields of a packet mbuf to their default values. + * + * The given mbuf must have only one segment. + * + * @param m + * The packet mbuf to be resetted. + */ +static inline void rte_pktmbuf_reset(struct rte_mbuf *m) +{ + m->next = NULL; + m->pkt_len = 0; + m->tx_offload = 0; + m->vlan_tci = 0; + m->vlan_tci_outer = 0; + m->nb_segs = 1; + m->port = 0xff; + + m->ol_flags = 0; + m->packet_type = 0; + m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ? + RTE_PKTMBUF_HEADROOM : m->buf_len; + + m->data_len = 0; + __rte_mbuf_sanity_check(m, 1); +} + +/** + * Allocate a new mbuf from a mempool. + * + * This new mbuf contains one segment, which has a length of 0. The pointer + * to data is initialized to have some bytes of headroom in the buffer + * (if buffer size allows). + * + * @param mp + * The mempool from which the mbuf is allocated. + * @return + * - The pointer to the new mbuf on success. + * - NULL if allocation failed. + */ +static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp) +{ + struct rte_mbuf *m; + if ((m = __rte_mbuf_raw_alloc(mp)) != NULL) + rte_pktmbuf_reset(m); + return m; +} + +/** + * Allocate a bulk of mbufs, initialize refcnt and reset the fields to default + * values. + * + * @param pool + * The mempool from which mbufs are allocated. + * @param mbufs + * Array of pointers to mbufs + * @param count + * Array size + * @return + * - 0: Success + */ +static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool, + struct rte_mbuf **mbufs, unsigned count) +{ + unsigned idx = 0; + int rc; + + rc = rte_mempool_get_bulk(pool, (void **)mbufs, count); + if (unlikely(rc)) + return rc; + + /* To understand duff's device on loop unwinding optimization, see + * https://en.wikipedia.org/wiki/Duff's_device. + * Here while() loop is used rather than do() while{} to avoid extra + * check if count is zero. + */ + switch (count % 4) { + case 0: + while (idx != count) { + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); + rte_mbuf_refcnt_set(mbufs[idx], 1); + rte_pktmbuf_reset(mbufs[idx]); + idx++; + case 3: + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); + rte_mbuf_refcnt_set(mbufs[idx], 1); + rte_pktmbuf_reset(mbufs[idx]); + idx++; + case 2: + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); + rte_mbuf_refcnt_set(mbufs[idx], 1); + rte_pktmbuf_reset(mbufs[idx]); + idx++; + case 1: + RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); + rte_mbuf_refcnt_set(mbufs[idx], 1); + rte_pktmbuf_reset(mbufs[idx]); + idx++; + } + } + return 0; +} + +/** + * Attach packet mbuf to another packet mbuf. + * + * After attachment we refer the mbuf we attached as 'indirect', + * while mbuf we attached to as 'direct'. + * Right now, not supported: + * - attachment for already indirect mbuf (e.g. - mi has to be direct). + * - mbuf we trying to attach (mi) is used by someone else + * e.g. it's reference counter is greater then 1. + * + * @param mi + * The indirect packet mbuf. + * @param m + * The packet mbuf we're attaching to. + */ +static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) +{ + struct rte_mbuf *md; + + RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) && + rte_mbuf_refcnt_read(mi) == 1); + + /* if m is not direct, get the mbuf that embeds the data */ + if (RTE_MBUF_DIRECT(m)) + md = m; + else + md = rte_mbuf_from_indirect(m); + + rte_mbuf_refcnt_update(md, 1); + mi->priv_size = m->priv_size; + mi->buf_physaddr = m->buf_physaddr; + mi->buf_addr = m->buf_addr; + mi->buf_len = m->buf_len; + + mi->next = m->next; + mi->data_off = m->data_off; + mi->data_len = m->data_len; + mi->port = m->port; + mi->vlan_tci = m->vlan_tci; + mi->vlan_tci_outer = m->vlan_tci_outer; + mi->tx_offload = m->tx_offload; + mi->hash = m->hash; + + mi->next = NULL; + mi->pkt_len = mi->data_len; + mi->nb_segs = 1; + mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF; + mi->packet_type = m->packet_type; + + __rte_mbuf_sanity_check(mi, 1); + __rte_mbuf_sanity_check(m, 0); +} + +/** + * Detach an indirect packet mbuf. + * + * - restore original mbuf address and length values. + * - reset pktmbuf data and data_len to their default values. + * All other fields of the given packet mbuf will be left intact. + * + * @param m + * The indirect attached packet mbuf. + */ +static inline void rte_pktmbuf_detach(struct rte_mbuf *m) +{ + struct rte_mempool *mp = m->pool; + uint32_t mbuf_size, buf_len, priv_size; + + priv_size = rte_pktmbuf_priv_size(mp); + mbuf_size = sizeof(struct rte_mbuf) + priv_size; + buf_len = rte_pktmbuf_data_room_size(mp); + + m->priv_size = priv_size; + m->buf_addr = (char *)m + mbuf_size; + m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size; + m->buf_len = (uint16_t)buf_len; + m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len); + m->data_len = 0; + m->ol_flags = 0; +} + +static inline struct rte_mbuf* __attribute__((always_inline)) +__rte_pktmbuf_prefree_seg(struct rte_mbuf *m) +{ + __rte_mbuf_sanity_check(m, 0); + + if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) { + + /* if this is an indirect mbuf, then + * - detach mbuf + * - free attached mbuf segment + */ + if (RTE_MBUF_INDIRECT(m)) { + struct rte_mbuf *md = rte_mbuf_from_indirect(m); + rte_pktmbuf_detach(m); + if (rte_mbuf_refcnt_update(md, -1) == 0) + __rte_mbuf_raw_free(md); + } + return m; + } + return NULL; +} + +/** + * Free a segment of a packet mbuf into its original mempool. + * + * Free an mbuf, without parsing other segments in case of chained + * buffers. + * + * @param m + * The packet mbuf segment to be freed. + */ +static inline void __attribute__((always_inline)) +rte_pktmbuf_free_seg(struct rte_mbuf *m) +{ + if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) { + m->next = NULL; + __rte_mbuf_raw_free(m); + } +} + +/** + * Free a packet mbuf back into its original mempool. + * + * Free an mbuf, and all its segments in case of chained buffers. Each + * segment is added back into its original mempool. + * + * @param m + * The packet mbuf to be freed. + */ +static inline void rte_pktmbuf_free(struct rte_mbuf *m) +{ + struct rte_mbuf *m_next; + + __rte_mbuf_sanity_check(m, 1); + + while (m != NULL) { + m_next = m->next; + rte_pktmbuf_free_seg(m); + m = m_next; + } +} + +/** + * Creates a "clone" of the given packet mbuf. + * + * Walks through all segments of the given packet mbuf, and for each of them: + * - Creates a new packet mbuf from the given pool. + * - Attaches newly created mbuf to the segment. + * Then updates pkt_len and nb_segs of the "clone" packet mbuf to match values + * from the original packet mbuf. + * + * @param md + * The packet mbuf to be cloned. + * @param mp + * The mempool from which the "clone" mbufs are allocated. + * @return + * - The pointer to the new "clone" mbuf on success. + * - NULL if allocation fails. + */ +static inline struct rte_mbuf *rte_pktmbuf_clone(struct rte_mbuf *md, + struct rte_mempool *mp) +{ + struct rte_mbuf *mc, *mi, **prev; + uint32_t pktlen; + uint8_t nseg; + + if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL)) + return NULL; + + mi = mc; + prev = &mi->next; + pktlen = md->pkt_len; + nseg = 0; + + do { + nseg++; + rte_pktmbuf_attach(mi, md); + *prev = mi; + prev = &mi->next; + } while ((md = md->next) != NULL && + (mi = rte_pktmbuf_alloc(mp)) != NULL); + + *prev = NULL; + mc->nb_segs = nseg; + mc->pkt_len = pktlen; + + /* Allocation of new indirect segment failed */ + if (unlikely (mi == NULL)) { + rte_pktmbuf_free(mc); + return NULL; + } + + __rte_mbuf_sanity_check(mc, 1); + return mc; +} + +/** + * Adds given value to the refcnt of all packet mbuf segments. + * + * Walks through all segments of given packet mbuf and for each of them + * invokes rte_mbuf_refcnt_update(). + * + * @param m + * The packet mbuf whose refcnt to be updated. + * @param v + * The value to add to the mbuf's segments refcnt. + */ +static inline void rte_pktmbuf_refcnt_update(struct rte_mbuf *m, int16_t v) +{ + __rte_mbuf_sanity_check(m, 1); + + do { + rte_mbuf_refcnt_update(m, v); + } while ((m = m->next) != NULL); +} + +/** + * Get the headroom in a packet mbuf. + * + * @param m + * The packet mbuf. + * @return + * The length of the headroom. + */ +static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m) +{ + __rte_mbuf_sanity_check(m, 1); + return m->data_off; +} + +/** + * Get the tailroom of a packet mbuf. + * + * @param m + * The packet mbuf. + * @return + * The length of the tailroom. + */ +static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m) +{ + __rte_mbuf_sanity_check(m, 1); + return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) - + m->data_len); +} + +/** + * Get the last segment of the packet. + * + * @param m + * The packet mbuf. + * @return + * The last segment of the given mbuf. + */ +static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) +{ + struct rte_mbuf *m2 = (struct rte_mbuf *)m; + + __rte_mbuf_sanity_check(m, 1); + while (m2->next != NULL) + m2 = m2->next; + return m2; +} + +/** + * A macro that points to an offset into the data in the mbuf. + * + * The returned pointer is cast to type t. Before using this + * function, the user must ensure that the first segment is large + * enough to accommodate its data. + * + * @param m + * The packet mbuf. + * @param o + * The offset into the mbuf data. + * @param t + * The type to cast the result into. + */ +#define rte_pktmbuf_mtod_offset(m, t, o) \ + ((t)((char *)(m)->buf_addr + (m)->data_off + (o))) + +/** + * A macro that points to the start of the data in the mbuf. + * + * The returned pointer is cast to type t. Before using this + * function, the user must ensure that the first segment is large + * enough to accommodate its data. + * + * @param m + * The packet mbuf. + * @param t + * The type to cast the result into. + */ +#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0) + +/** + * A macro that returns the physical address that points to an offset of the + * start of the data in the mbuf + * + * @param m + * The packet mbuf. + * @param o + * The offset into the data to calculate address from. + */ +#define rte_pktmbuf_mtophys_offset(m, o) \ + (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o)) + +/** + * A macro that returns the physical address that points to the start of the + * data in the mbuf + * + * @param m + * The packet mbuf. + */ +#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0) + +/** + * A macro that returns the length of the packet. + * + * The value can be read or assigned. + * + * @param m + * The packet mbuf. + */ +#define rte_pktmbuf_pkt_len(m) ((m)->pkt_len) + +/** + * A macro that returns the length of the segment. + * + * The value can be read or assigned. + * + * @param m + * The packet mbuf. + */ +#define rte_pktmbuf_data_len(m) ((m)->data_len) + +/** + * Prepend len bytes to an mbuf data area. + * + * Returns a pointer to the new + * data start address. If there is not enough headroom in the first + * segment, the function will return NULL, without modifying the mbuf. + * + * @param m + * The pkt mbuf. + * @param len + * The amount of data to prepend (in bytes). + * @return + * A pointer to the start of the newly prepended data, or + * NULL if there is not enough headroom space in the first segment + */ +static inline char *rte_pktmbuf_prepend(struct rte_mbuf *m, + uint16_t len) +{ + __rte_mbuf_sanity_check(m, 1); + + if (unlikely(len > rte_pktmbuf_headroom(m))) + return NULL; + + m->data_off -= len; + m->data_len = (uint16_t)(m->data_len + len); + m->pkt_len = (m->pkt_len + len); + + return (char *)m->buf_addr + m->data_off; +} + +/** + * Append len bytes to an mbuf. + * + * Append len bytes to an mbuf and return a pointer to the start address + * of the added data. If there is not enough tailroom in the last + * segment, the function will return NULL, without modifying the mbuf. + * + * @param m + * The packet mbuf. + * @param len + * The amount of data to append (in bytes). + * @return + * A pointer to the start of the newly appended data, or + * NULL if there is not enough tailroom space in the last segment + */ +static inline char *rte_pktmbuf_append(struct rte_mbuf *m, uint16_t len) +{ + void *tail; + struct rte_mbuf *m_last; + + __rte_mbuf_sanity_check(m, 1); + + m_last = rte_pktmbuf_lastseg(m); + if (unlikely(len > rte_pktmbuf_tailroom(m_last))) + return NULL; + + tail = (char *)m_last->buf_addr + m_last->data_off + m_last->data_len; + m_last->data_len = (uint16_t)(m_last->data_len + len); + m->pkt_len = (m->pkt_len + len); + return (char*) tail; +} + +/** + * Remove len bytes at the beginning of an mbuf. + * + * Returns a pointer to the start address of the new data area. If the + * length is greater than the length of the first segment, then the + * function will fail and return NULL, without modifying the mbuf. + * + * @param m + * The packet mbuf. + * @param len + * The amount of data to remove (in bytes). + * @return + * A pointer to the new start of the data. + */ +static inline char *rte_pktmbuf_adj(struct rte_mbuf *m, uint16_t len) +{ + __rte_mbuf_sanity_check(m, 1); + + if (unlikely(len > m->data_len)) + return NULL; + + m->data_len = (uint16_t)(m->data_len - len); + m->data_off += len; + m->pkt_len = (m->pkt_len - len); + return (char *)m->buf_addr + m->data_off; +} + +/** + * Remove len bytes of data at the end of the mbuf. + * + * If the length is greater than the length of the last segment, the + * function will fail and return -1 without modifying the mbuf. + * + * @param m + * The packet mbuf. + * @param len + * The amount of data to remove (in bytes). + * @return + * - 0: On success. + * - -1: On error. + */ +static inline int rte_pktmbuf_trim(struct rte_mbuf *m, uint16_t len) +{ + struct rte_mbuf *m_last; + + __rte_mbuf_sanity_check(m, 1); + + m_last = rte_pktmbuf_lastseg(m); + if (unlikely(len > m_last->data_len)) + return -1; + + m_last->data_len = (uint16_t)(m_last->data_len - len); + m->pkt_len = (m->pkt_len - len); + return 0; +} + +/** + * Test if mbuf data is contiguous. + * + * @param m + * The packet mbuf. + * @return + * - 1, if all data is contiguous (one segment). + * - 0, if there is several segments. + */ +static inline int rte_pktmbuf_is_contiguous(const struct rte_mbuf *m) +{ + __rte_mbuf_sanity_check(m, 1); + return !!(m->nb_segs == 1); +} + +/** + * Chain an mbuf to another, thereby creating a segmented packet. + * + * Note: The implementation will do a linear walk over the segments to find + * the tail entry. For cases when there are many segments, it's better to + * chain the entries manually. + * + * @param head + * The head of the mbuf chain (the first packet) + * @param tail + * The mbuf to put last in the chain + * + * @return + * - 0, on success. + * - -EOVERFLOW, if the chain is full (256 entries) + */ +static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail) +{ + struct rte_mbuf *cur_tail; + + /* Check for number-of-segments-overflow */ + if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8)) + return -EOVERFLOW; + + /* Chain 'tail' onto the old tail */ + cur_tail = rte_pktmbuf_lastseg(head); + cur_tail->next = tail; + + /* accumulate number of segments and total length. */ + head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs); + head->pkt_len += tail->pkt_len; + + /* pkt_len is only set in the head */ + tail->pkt_len = tail->data_len; + + return 0; +} + +/** + * Dump an mbuf structure to the console. + * + * Dump all fields for the given packet mbuf and all its associated + * segments (in the case of a chained buffer). + * + * @param f + * A pointer to a file for output + * @param m + * The packet mbuf. + * @param dump_len + * If dump_len != 0, also dump the "dump_len" first data bytes of + * the packet. + */ +void rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_MBUF_H_ */ -- cgit 1.2.3-korg